Honeywell QUANTUME IS3480 Manuel utilisateur

IS3480 QuantumE®

Scan Engine

User’s Guide

Disclaimer

Honeywell International Inc. (“HII”) reserves the right to make changes in

specifications and other information contained in this document without prior

notice, and the reader should in all cases consult HII to determine whether any

such changes have been made. The information in this publication does not

represent a commitment on the part of HII.

HII shall not be liable for technical or editorial errors or omissions contained

herein: nor for incidental or consequential damages resulting from the furnishing,

performance, or use of this manual.

This document contains propriety information that is protected by copyright.

or translated into another language without the prior written consent of HII.

Web Address: www.honeywellaidc.com

Trademarks

Metrologic, QuantumE, CodeGate, MetroSelect and MetroSet2 are trademarks or

registered trademarks of Metrologic Instruments, Inc. or Honeywell International

Inc.

Microsoft, Windows 95, and Windows are registered trademarks of Microsoft

Corporation.

IBM is a trademark of International Business Machines Corporation.

Checkpoint is a registered trademark of Checkpoint Systems, Inc.

Other product names mentioned in this manual may be trademarks or

registered trademarks of their respective companies and are the property of their

respective owners.

TABLE OF CONTENTS

Introduction

Product Overview ............................................................................................. 1

Scanner and Accessories................................................................................. 2

Maintenance..................................................................................................... 3

Scanner Components....................................................................................... 4

Cable Removal................................................................................................. 4

Caution and Serial Number Labels................................................................... 5

Mounting Specifications ................................................................................... 5

Installation

RS232, RS232 TTL, Light Pen or Laser Emulation .......................................... 6

RS485 .............................................................................................................. 7

Keyboard Wedge.............................................................................................. 8

Stand-Alone Keyboard ..................................................................................... 9

Low Speed USB (Integrated).......................................................................... 10

Notes for Laser Emulation.............................................................................. 11

Scanner Operation

Configurable Primary and Secondary Scan Pattern Modes ........................... 12

Configurable Button Functions ....................................................................... 12

Sweet Spot Mode........................................................................................... 17

Indicators

Audible ....................................................................................................... 18

Visual ......................................................................................................... 19

Failure ........................................................................................................ 20

Depth of Field Specifications

Normal Scan Zone ..................................................................................... 21

Reduced Scan Zone................................................................................... 22

Depth of Field by Bar Code Element Width

Normal Scan Zone ..................................................................................... 23

Reduced Scan Zone................................................................................... 24

iii

TABLE OF CONTENTS

IR Activation Range........................................................................................ 25

Troubleshooting Guide ....................................................................................... 26

Design Specifications ......................................................................................... 29

Applications and Protocols ................................................................................. 31

Configuration Modes .......................................................................................... 32

Upgrading the Firmware..................................................................................... 33

Default Settings - Communication Parameters................................................... 34

Scanner and Cable Terminations ....................................................................... 39

Regulatory Compliance

Safety ............................................................................................................. 44

EMC ............................................................................................................... 45

Limited Warranty ................................................................................................ 47

Patents ............................................................................................................... 49

Index .................................................................................................................. 50

Customer Support .............................................................................................. 52

Technical Assistance...................................................................................... 52

Product Service and Repair............................................................................ 53

INTRODUCTION

QuantumE

®is a miniature, omni-directional scanning engine with optional single-

line scanning capability. The self-contained device is fully enclosed eliminating

the need for an external window or custom enclosure. It is designed for use in

OEM equipment such as price lookup systems and kiosks. QuantumEs slim

design makes it ideal for integration and use with flat-screens.

Key Product Features

•Fully Automatic Scanning Operation

•Custom Configurable Scan Pattern

•User-Replaceable Single Cable Interface to Host (PowerLink Compatible)

•Decoding of All Standard 1D and GS1 DataBar™ (RSS) Bar Codes

•Data Editing

•Seven Beeper Tones

•Configurable Depth of Field

•Flash - Upgradeable Firmware

•CodeGate®

•Sunrise 2005 Compliant

SCANNER INTERFACE

IS3480-11 RS485and Full RS232

IS3480-38 RS232 Low Speed USB,

Keyboard Emulation or Serial Emulation

IS3480-41 RS232/Light Pen Emulation

IS3480-47 Keyboard Wedge, Stand-Alone Keyboard and

RS232 Transmit/Receive

IS3480-104 RS232 TTL, Laser Emulation

Applicable for IBM®Host applications.

INTRODUCTION

Scanner and Accessories

BASIC KIT COMPONENTS

Part No. Description

IS3480 QuantumEScanner

00-02026 IS3480 Installation and User’s Guide *

00-02407 MetroSelect®Configuration Guide *

*Guides also available for download at www.honeywellaidc.com.

OPTIONAL ACCESSORIES

Part No. Description

AC to DC Power Transformer - Regulated 5.2VDC @ 1A output.

46-00525 90VAC to 255VAC United States, Canada and Japan

46-00526 90VAC to 255VAC Continental European

46-00527 90VAC to 255VAC United Kingdom

46-00528 90VAC to 255VAC Australia

46-00529 90VAC to 255VAC China

46-00530 90VAC to 255VAC India

59-59000-3

(default)

PowerLink cable with built in power jack straight cord, short

strain relief

53-53000-3

(optional)

PowerLink cable with built in power jack coiled cord, long

strain relief

** Contact a customer service representative for additional information on

the MVC cable series and the host connections available.

MVC** Voltage Converter Cable ±12VDC to +5.2VDC

Other items may be ordered for the specific protocol being used. To order additional

items, contact the dealer, distributor or customer service. See page 52 for contact

information.

INTRODUCTION

Scanner and Accessories

OPTIONAL ACCESSORIES

Part No. Description

59-59002x-3 Keyboard Wedge PowerLink cable

59-59020x-3 Stand Alone Keyboard PowerLink cable

59-59235x-N-3 Low Speed USB Non-Locking Communication Cable

straight cord, short strain relief

35-35959 Utility Flex Cable

59-59249x-N-3 Communication Cable, Host end Not Terminated straight

cord, short strain relief

REPLACEMENT PARTS

Part No. Description

36-01822x-3 Rubber Utility Seal

Other items may be ordered for the specific protocol being used. To order additional

items, contact the dealer, distributor or customer service. See page 52 for contact

information.

Maintenance

Smudges and dirt on the unit's window can interfere with the unit's performance.

If the window requires cleaning, use only a mild glass cleaner containing no

ammonia. When cleaning the window, spray the cleaner onto a lint free, non-

abrasive cleaning cloth then gently wipe the window clean.

If the unit's case requires cleaning, use a mild cleaning agent that does not

contain strong oxidizing chemicals. Strong cleaning agents may discolor or

damage the unit's exterior.

INTRODUCTION

Scanner Components

Figure 1a. Scanner Components

ITEM NO. DESCRIPTION

1 Utility Connector Located Under Rubber Seal

The rubber seal protecting the utility connector should only be

removed if the utility connector is to be used.

2 10-Pin RJ45, Female Socket

3 Blue, White and Yellow LED Indicators

4 Red Output Window (Laser Aperture)

5 Pin Hole for Cable Release

6 Speaker

7 Three M2.5 x 0.45 Threaded Mounting Points

8 Two M2.5 x 0.45 Threaded Mounting Points

9 Button

Cable Removal

1. Locate the small ‘pinhole’ on the side of the

QuantumEnear the cable (item 5 in figure 1a).

2. Bend an ordinary paperclip into the shape shown.

3. Insert the paperclip (or other small metallic pin)

into the ‘pinhole’.

4. There will be a faint ‘click’ when the cable lock is

released. Pull gently on the strain-relief of the

PowerLink cable to remove it from the scanner.

Figure 1b.

INTRODUCTION

Caution and Serial Number Labels

Figure 2.

Caution

To maintain compliance with applicable standards, all circuits connected to the

scanner must meet the requirements for SELV (Safety Extra Low Voltage) according

to EN/IEC 60950-1.

To maintain compliance with standard CSA C22.2 No. 60950-1/UL 60950-1 and norm

EN/IEC 60950-1, the power source should meet applicable performance requirements for a

limited power source.

Mounting Specifications

Figure 3.

INSTALLATION

RS232, RS232 TTL, Light Pen or Laser Emulation

1. Turn off the host device.

2. Plug the male 10-pin RJ45 end

of the PowerLink cable into the

10-pin socket on the IS3480.

3. Connect the 9-pin female end of the

PowerLink cable to the host device.

Note: Skip to step 6 if receiving

power from the host device.

4. Plug the external power supply into

the power jack on the PowerLink

cable.

Check the AC input

requirements of the power

supply to make sure the

voltage matches the AC

outlet. The outlet must be

located near the equipment

and be easily accessible.

5. Connect AC power to the transformer.

6. Turn on the host device.

When the scanner first receives power, the blue LED will turn on;

the scanner will simultaneously beep once and flash the white LED.

Plugging the scanner into the serial port of the PC does not

guarantee that scanned information will appear at the PC.

A software driver and correct configuration setting are also required

for proper communication to occur.

See page 5.

Figure 4.

Autres manuels pour QUANTUME IS3480

Table des matières

Autres manuels Honeywell Lecteur de codes-barres

Honeywell

Honeywell 4800i Manuel utilisateur

Honeywell

Honeywell Xenon XP 1950h Manuel utilisateur

Honeywell

Honeywell Voyager 1450g Series Manuel utilisateur

Honeywell

Honeywell Eclipse MS5100 Series Manuel utilisateur

Honeywell

Honeywell VOYAGER 1250G Manuel utilisateur

Honeywell

Honeywell 3820 Manuel utilisateur

Honeywell

Honeywell Metrologic 3780 Manuel utilisateur

Honeywell

Honeywell 8680i Series Manuel utilisateur

Honeywell

Honeywell 4850DR Manuel utilisateur

Honeywell

Honeywell VoyagerCG MS9540 Manuel

Honeywell

Honeywell IS4921 Guide de configuration rapide

Honeywell

Honeywell 1900GSR-2 Manuel utilisateur

Honeywell

Honeywell CM4680 Manuel utilisateur

Honeywell

Honeywell Solaris MS7820 Manuel utilisateur

Honeywell

Honeywell XENON 1900 Manuel utilisateur

Honeywell

Honeywell VOYAGER 1202G BF Manuel utilisateur

Honeywell

Honeywell Granit XP 199 i Series Manuel utilisateur

Honeywell

Honeywell XENON 1902G-BF Dimensions

Honeywell

Honeywell XENON 1900 Manuel utilisateur

Honeywell

Honeywell IS4225 ScanGlove Manuel utilisateur

Honeywell

Honeywell 1400gPDF Manuel utilisateur

Honeywell

Honeywell Hyperion 1300G Manuel utilisateur

Honeywell

Honeywell PX4-6IE-CUTR-IG-1 Manuel utilisateur

Honeywell

Honeywell 7120 Orbit Manuel utilisateur

Manuels Lecteur de codes-barres populaires d'autres marques

POSMicro

POSMicro Datalogic PowerScan D7100 Manuel utilisateur

Marson

Marson MT780 Guide de configuration rapide

NCR

NCR RealPOS Manuel utilisateur

Motorola

Motorola SE3300 Guide de configuration rapide

Element

Element P130BT Manuel utilisateur

Motorola

Motorola Symbol LS3008 Manuel d'installation et d'exploitation

Meec tools

Meec tools OBD-II / VAG Manuel utilisateur

SICK

SICK CLP 100 Manuel utilisateur

Royal Tag SA

Royal Tag SA I-Read Manuel utilisateur

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuel utilisateur

Meteor

Meteor 8310 Manuel utilisateur

Denso

Denso BHT-500B Manuel utilisateur

Datalogic

Datalogic Heron HD3130 Manuel utilisateur

Motorola

Motorola MP6000 Instructions de montage

Newland

Newland NLS-HR15-BT Manuel utilisateur

ARTDEV

ARTDEV AS-1310 Manuel utilisateur

Aopos

Aopos AS290 Manuel utilisateur

ENS

ENS 367-5455 Manuel utilisateur