Hitex MCB2100 Manuel utilisateur
Quick Start Guide
Hitex Starter Kit for ARM®
with
MCB2100 Evaluation Board
04/2006 - 006 - 5.2 - 30.17.0011.0
© Copyright 2006 Hitex Development Tools GmbH
All rights reserved. No part of this document may be copied or reproduced in any
form or by any means without prior written consent of Hitex Development Tools.
Hitex Development Tools retains the right to make changes to these specifications at
any time, without notice. Hitex Development Tools makes no commitment to update
nor to keep current the information contained in this document.
Hitex Development Tools makes no warranty of any kind with regard to this material,
including, but not limited to, the implied warranties of merchantability and fitness for
a particular purpose. Hitex Development Tools assumes no responsibility for any
errors that may appear in this document.
DProbe, Hitex, HiTOP, Tanto, and Tantino are trademarks of Hitex Development
Tools. All trademarks of other companies used in this document refer exclusively to
the products of these companies.
Hitex Development Tools GmbH
Greschbachstr. 12
D-76229 Karlsruhe
G
ermany
Tel: +49 721 9628 - 0
Fax: +49 721 9628 - 149
Internet: http://www.hitex.de http://www.hitex.com
04/2006 - 006 - 5.2
3
Contents
1 Introduction 5
2 Installing Software and Hardware 6
3 Starting a Project in HiTOP 8
4 The First Steps of Debugging 11
5 Modifying an Application 16
6 Trace Debugging (ETM Support) 16
4 Hitex Starter Kit for ARM®/ MCB2100 Board
Hitex Starter Kit for ARM®/ MCB2100 Board 5
1 Introduction
This starter kit is intended to give a fast introduction into the Philips
LPC2000 ARM microcontroller family, the development of ARM
code and the debugging using the debug hardware Tantino for
ARM 7-9 with HiTOP.
The best way getting started is to follow the instructions of this
small guide.
To get more information about the Hitex Tool chain for ARM, refer
to http://www.hitex.com/perm/arm_toolchain.html.
A comprehensive introduction to the HiTOP5 user interface will be
given in our video tutorials. Feel free to download the movies on
http://www.hitex.com/perm/video_tutorials.html.
We wish you a fast and high quality embedded development using
the Philips LPC2000 microcontroller.
Your Hitex Team
6 Hitex Starter Kit for ARM®/ MCB2100 Board
2 Installing Software and Hardware
Installing the Software
For the installation of HiTOP please insert the CD and follow the
instructions on the screen. If the auto run feature of your CD drive
is disabled, open the CD drive folder and start setup.exe.
Click on
and
and follow the instructions on the screen.
After installing HiTOP, check the jumpers and switches of the
MCB2100 evaluation board.
Now the debug hardware Tantino and the evaluation board may be
installed.
Hitex Starter Kit for ARM®/ MCB2100 Board 7
Installing the Hardware
Tantino for ARM 7-9
•
•
•
Connect the Tantino to the PC's USB port via the USB cable (1).
Connect the 20-pin cable to the board's JTAG connector (2).
Connect the board's power supply (3).
For more details refer to the manual included in the board delivery
package and the Getting Started topic of the Tantino online help.
8 Hitex Starter Kit for ARM®/ MCB2100 Board
3 Starting a Project in HiTOP
Start HiTOP by double clicking the desktop icon:
The tip of the day is presented which contains useful
information when working with HiTOP.
If HiTOP is started for the first time, select the System > Connect
command.
Choose the debugger hardware (Tantino for ARM 7-9 according to
the bottom side label of your Tantino system) and click on Next.
Select as the vendor Philips, as the controller type LPC2129, as
the ARM core type ARM7 and as byte order Little Endian. Click on
Next.
Select as communication port USB and enter the serial number of
your Tantino (without leading zeros).1Click on Connect and
HiTOP will be connected to the Tantino.
If you still have no valid HiTOP license, you will have to fill in the
HiTOP registration dialog.
Now you may load a program into the FLASH or into the RAM. The
project file names show the usage of the memory remapping after
reset.
1The serial number can be found on the down side of the device.
Hitex Starter Kit for ARM®/ MCB2100 Board 9
Starting a FLASH Project
Start the FLASH project using the Project > Open command and
in the ..\Examples\LPC2000\MCB2100\GNU folder, select the
following project file:
Clock_MCB2100_Gnu_Flash.htp
When the Download dialog is presented, click on Ok.
Continue with section Project Loaded (p. 10).
Starting a RAM Project
The RAM project is using only RAM. The necessary remapping
after start will be performed by starting the project.
Start the RAM project using the Project > Open command and in
the ..\Examples\LPC2000\MCB2100\GNU folder, select the
following project file:
Clock_MCB2100_Gnu_RAM.htp
Continue with section Project Loaded (p. 10).
10 Hitex Starter Kit for ARM®/ MCB2100 Board
Project Loaded
After having loaded the project successfully, proceed as follows:
When pressing the target's reset button or performing a target reset
using HiTOP's Debug > Reset command, execute the script file by
clicking on the following toolbar icon:
You may now arrange the windows according to your needs. Note,
that using the View > Save screen layout and View > Load
screen layout commands different window layouts can be stored
and reloaded.1
Do not forget to save the project after such changes (Project > Save).
1More about the handling of HiTOP is shown in the online help system and in the
video tutorials.
Table des matières
Autres manuels Hitex Carte mère
Manuels Carte mère populaires d'autres marques
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuel utilisateur
Gigabyte
Gigabyte GA-9IVDT Manuel utilisateur
Texas Instruments
Texas Instruments ADS8372EVM Manuel utilisateur
Commell
Commell MS-C73 Manuel utilisateur
IBT Technologies
IBT Technologies MB860 Manuel utilisateur
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur
