Hitachi Ultrastar A7K1000 Manuel utilisateur

Page 1

version 1.0

Quick Installation Guide

______________________________

Handling precautions

• Do not open the electrostatic discharge (ESD)

bag containing the drive until required.

• Do not apply pressure on the drive during

handling and installation.

• To prevent damage from impact or vibration

always set the drive down gently.

• Handle the drive carefully by the edges. Do

not touch the exposed printed circuit board or

any electronic components.

• Do not cover the breather hole! Covering the

breather hole may result in loss of data.

• Save the packaging materials including the

ESD bag in the event that the hard drive must

be returned.

Installing the hard drive

1. Record the serial number and part number of

your hard drive for future reference.

2. Turn off the computer and remove the

computer system cover.

3. Unplug the computer.

4. Before handling the hard drive, discharge any

static electricity from yourself and your

clothing. With one hand touch an unpainted

metal surface on the computer chassis, and

then touch the ESD bag with the other hand

for a minimum of two seconds.

5. Remove the hard drive from the ESD bag.

6. Unplug the computer.

7. Assign a SCSI address if necessary.

Mounting orientation

The drive will operate in all axes (6 directions).

Performance and error rate will stay within

specification limits if the drive is operated in the

other orientations from which it was formatted.

The recommended mounting screw torque is 0.6 -

1.0 Nm (6 - 10 kgf-cm). The recommended

mounting screw depth is 4 mm maximum for

bottom and 4.5 mm maximum for horizontal

mounting. To avoid performance degradation,

mount the drive in the system securely enough to

prevent excessive motion or vibration of the drive

at seek operation or spindle rotation, using

appropriate screws or equivalent mounting

hardware. Consult with the issuer of this

specification for actual application if necessary.

Drive level vibration tests and shock tests are to be

conducted with the drive mounted to a table using

the bottom four screws.

Turn on your computer.

• If the system boots, be sure the drive is

recognized. If it is, turn off the computer

and replace the cover. Continue to install

your operating system.

• If your system does not boot up, turn off

your computer and check all connections

and settings. Turn on and boot the

system.

• If the system fails to boot, turn off your

system. Contact the Hitachi GST Support

Center for assistance.

Special Notes:

•For this drive to operate in LVD mode all

SCSI devices including the SCSI bus host

adapter must be LVD devices.

Page 2

version 1.0

________________________

©Copyright Hitachi Global Storage Technologies 2007

Produced in the United States

4/07

Hitachi Global Storage Technologies.

Other product names are trademarks or registered

trademarks of other respective companies.

References in this publication to Hitachi Global

Storage Technologies products, programs or

services do not imply that Hitachi Global Storage

Technologies intends to make these available in all

countries in which Hitachi Global Storage

Technologies operates.

Product information is provided for information

purposes only and does not constitute a warranty.

Information is true as of the date of publication and

is subject to change. Actual results may vary.

This publication is for general guidance only.

Photographs may show design models.

23 April 2007

Ce manuel convient aux modèles suivants

Autres manuels Hitachi Stockage

Hitachi

Hitachi RPI-8.0FSN3E Manuel utilisateur

Hitachi

Hitachi E1090 Manuel utilisateur

Hitachi

Hitachi Adaptable Modular Storage 2000 Instructions d'utilisation

Hitachi

Hitachi G1500 Instructions d'installation

Hitachi

Hitachi DKC910I Manuel utilisateur

Hitachi

Hitachi 3.5-INCH Deskstar HDS5C3030ALA630 Manuel utilisateur

Hitachi

Hitachi Endurastar N4K50 Manuel utilisateur

Hitachi

Hitachi 3.5-inch Deskstar HDS721010DLE630 Manuel utilisateur

Hitachi

Hitachi E590 Manuel d'utilisation et d'entretien

Hitachi

Hitachi VSP G130 Manuel utilisateur

Hitachi

Hitachi Travelstar 5K1000 Manuel utilisateur

Hitachi

Hitachi Travelstar C4K60 Manuel utilisateur

Hitachi

Hitachi Ultrastar SCSI Interface HUS103014FL3600 Manuel d'installation et d'exploitation

Hitachi

Hitachi 2.5-INCH Travelstar HTS542525K9A300 Manuel utilisateur

Hitachi

Hitachi Microdrive 3K8 Manuel utilisateur

Hitachi

Hitachi Endurastar J4K30 Manuel utilisateur

Hitachi

Hitachi Deskstar 7K80 Manuel utilisateur

Hitachi

Hitachi Virtual Storage Platform F350 Manuel d'utilisation et d'entretien

Hitachi

Hitachi Travelstar 5K120 Manuel utilisateur

Hitachi

Hitachi Travelstar 5K80 Manuel utilisateur

Hitachi

Hitachi T7K250 - Deskstar - Hard Drive Manuel utilisateur

Hitachi

Hitachi Travelstar 2.5-inch HIGH-PERFORMANCE... Manuel utilisateur

Hitachi

Hitachi VSP Gx00 series Manuel de service

Hitachi

Hitachi Virtual Storage Platform G200 Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur