Hitachi LP-WU6600 Manuel utilisateur

Projector

LP-WU6600 / LP-WU6700

User's Manual

Thank you for purchasing this product. Please read this

manual before you operate your projector. Save it for

future reference.

INDEX

Warning, Notices and Safety Instructions 4

Projector parts and functions 18

Front view 18

LED Indicator 18

Rear view 19

Projector keypad 19

I/O Control (Input / Output) 20

Bottom view 21

Remote control 22

Range of effective remote control signal reception 24

Installing batteries in the remote control 24

Projector installation 26

Installing or removing the optional lens 26

Installing the new lens 26

Removing the existing lens from the projector 27

Throw distance 28

Modes of installation 28

Projection 28

Horizontal and vertical lens shift 30

Lens shift 30

Moving the lens vertically 32

Moving the lens horizontally 32

Connecting the projector 33

HDMI / MHL / DVI connection 33

RGB connection 34

HDBaseT connection 36

12V Trigger connection 37

RJ45 connection 37

USB POWER (5V/1.5A) connection 38

3D SYNC (5V) connection 38

VIDEO connection 39

SERVICE connection 39

RS232C connection 40

Audio IN (L/R) connection 40

Audio OUT (L/R) connection 41

Audio IN (Mini jack) connection 41

WIRE REMOTE connection 42

Powering the projector on or off 43

Powering on the projector 43

Connect the power cord to the projector 43

Turning off the projector 43

Selecting an input source 44

Setting an access password (security lock) 45

Choosing a location 47

Adjusting the projector's angle 48

Adjusting the projector’s zoom and focus 48

Zoom 48

Focus 49

Correcting keystone 49

OSD menu tree 50

OSD description 54

Image 54

Display Mode 54

Brightness 55

Contrast 55

Computer 56

Auto Image 57

Advanced 57

Color Manager 59

Settings 1 60

Source 60

Projection 60

Aspect Ratio 61

Keystone 61

Digital Zoom 61

Audio 61

Advanced 1 62

Advanced 2 63

4 Corner 63

Settings 2 64

Auto Source 64

No Signal Power Off 64

Auto Power On 64

Light Mode 64

Reset All 65

Status 65

Advanced 1 65

Advanced 2 74

Custom Light 74

Cleaning 75

Cleaning the cabinet 75

Cleaning the lens 75

Using the Kensington®lock 76

Simple troubleshooting 77

LED status 78

Specications 80

Supported signal input modes 81

3D timing format 82

Dimensions 83

Communication settings 84

RS-232 communication 84

Connection 84

Command control via the network 86

Connection 86

Communication port 86

Command control settings 87

Communication command table 87

PJLink command 94

Trademark 96

Warranty and after-service 96

Warning, Notices and Safety Instructions

Notice

This product is intended for the adults who have the ability to operate this machine.

Please write down your projector model number and serial number and keep the information for

maintenance purposes in the future. Should the equipment be lost or stolen, the information could

also be used for the police report.

Model number:

Serial number:

Please check the accessories that come with the projector with the following list. Should you nd any

missing accessory, contact your dealer immediately.

1. AC Power Cord US 125V 4. Remote control 7. Printed Manual 10. WEEE Manual

2. AC Power Cord EU 5. AAA battery 2pcs 8. EAC Document 11. 3D Sync cable 2pcs

3. Wire Remote Cable 6. CD-ROM 9. EU Recycle Sheet 12. RGB cable

Do not open

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with an arrowhead within a triangle

is intended to tell the user that inside this product

may cause risk of electrical shock to persons.

The exclamation point within a triangle is intended to tell

the user that important operating and/or servicing instructions

are included in the technical documentation for this equipment.

CAUTION / TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER(OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

This is a Class A product. In a domestic environment this product may cause radio interference in

which case the user may be required to take adequate measures.

Description pertaining to FCC Rules Part 15

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

This device has been tested and found to comply with the limits for a Class A digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy. If not installed and used in

accordance with the instructions, may cause harmful interference to radio or television reception.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or

the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

Warning, Notices and Safety Instructions

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modications not expressly approved by the manufacturer void the user’s

authority to operate the equipment.

This Class A digital apparatus meets all requirements of the Canadian ICES-003 Standards.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

Information for users applicable in European Union countries

This symbol on the product or on its packaging means that your electrical and electronic

equipment should be disposed at the end of life separately from your household wastes.

There are separate collection systems for recycling in EU.

For more information, please contact the local authority or the dealer where you

purchased the product.

About Waste Electrical and Electronic Equipment

The mark is in compliance with the Waste Electrical and Electronic Equipment

Directive 2002/96/EC (WEEE).The mark indicates the requirement NOT to dispose

the equipment including any spent or discarded batteries or accumulators as unsorted

municipal waste, but use the return and collection systems available. If the batteries

or accumulators included with this equipment, display the chemical symbol Hg, Cd,

or Pb, then it means that the battery has a heavy metal content of more than 0.0005%

Mercury or more than, 0.002% Cadmium, or more than 0.004% Lead.

Sun light Warning

Avoid using this projector in direct sun light.

Sun light on the projector lens can severely damage the Digital Mirror Devices (DMD™).

Never look into the projector light source directly

When turn on the projector, make sure nobody's eye will effects by the projection of

light.

Always avoid to let eyes contact to the light.

As with any bright source, do not stare into the direct beam, RG2 IEC 62471-5:2015.

Electric shock

To protect your projector, avoid turning on the projector during lightning storms and unplug it from

the wall outlet. This will prevent sudden electrical surges caused by the lightning from damaging the

projector.

Warning, Notices and Safety Instructions

Do not overload wall outlets/extension cords

Pay attention to the current load of the outlet you are using, be it wall outlet or extension cord outlet to

prevent re or electric shock.

Cleaning

When cleaning the projector, be sure to unplug it from the wall outlet to prevent electric shock.

Do not use liquid or aerosol cleaners. Use a dry/damp cloth with excessive moisture removed for

cleaning. Be sure to use cleaning cloth designed to clean monitors for the projector to prevent

damages to the projector casing due to abrasion.

Dampness, smoke, steam, dust, high temperature and direct exposure to sunlight

Do not operate the projector in environments where it could be expose to dampness, smoke, steam,

dust, high temperature or direct sunlight. For example: bathroom, kitchen, adjacent to washing

machine, damp basement rooms, electric heaters or similar environments. Keeping or operating the

projector in the above-mentioned environment could lead to discoloration, mold formation, grease or

damages to the projector.

Ventilation

The projector case is designed with slots and openings to remove the heat inside the projector so that

it will not overheat and damage the components. Be sure to operate the projector in an environment

with ideal ventilation and don't operate it on a sofa, rug or other closed-in environments that could

obstruct ventilation.

Intrusion of foreign objects

Be sure to keep all foreign objects away from entering the projector because it could be exposed to

hazardous voltages and cause parts to short circuit. This could in turn lead to re hazard or electric

shock. Examples of foreign objects include: cockroach, screws, liquid and so forth.

In addition, never spill liquid into the projector.

Coolinguid

When the projector is damaged, cooling uid may come out of internal radiator or the tank. Never

touch and drink it. When the uid are swallowed or contacted with your eyes, Please have doctor's

medical examination immediately.

Carrying the projector

The projector net weight is 23kg (not include lens). When moving the projector on a

cart, be sure to handle the cart with care as abrupt stops, jolts of excessive force or

uneven ground could lead the projector to topple.

Warning, Notices and Safety Instructions

Please install the projector on an even and stable surface

Avoid placing the projector on unstable cart, tripod, table and so forth to prevent the projector from

falling, becoming damaged or causing injuries.

Servicing

Should you encounter problem with the projector, please seek assistance from your local dealer or

qualied service personnel. Do not attempt to service the projector by yourself so that you would not

be exposed to high voltage or other potential hazards.

No service is allowed except by authorized personnel.

Should you encounter any of the following situation, please unplug your projector from the wall outlet

and contact a qualied service personnel for assistance:

• Damaged power cord or power plug.

• If a foreign object has fallen into the projector or if you have spilled water or other liquid into the

projector.

• If the projector has been dropped accidentally or damaged.

• If you experience noticeably poor performance or malfunctioning with the projector despite having

followed instructions for normal operation.

Changing parts

Should any part of the projector be damaged, check with your servicing personnel that only

manufacturer certied parts were used for replacement. Used of non-certied parts may result in

damages to the projector or hazards such as re or electric shock. After changing parts, be sure to

remind the servicing personnel to perform safety inspections to ensure that the projector operates

normally.

No maintenance allowed by end user, Do not open the cabinet.

No user serviceable part inside.

Warning, Notices and Safety Instructions

Power cord

Don't place the projector where the cord can be walked on. This may result in fraying or damage to

the power cord, especially at the plug and the point of connection between the power cord and the

projector.

Please use the power cord that comes with the projector or the type of power cord specied for

the projector (refer to the descriptions printed on the power cord). If you are not sure of the power

available at the region you are in, consult your local power company to prevent damages to the

projector due to the use of wrong power cord or potential re hazards due to current overload.

Depending on the country and region you are in, the voltage and type of socket of the wall outlet may

be different from the projector. If you are unable to t the power plug into the wall outlet, contact your

local dealer and do not remove the extra pin on the power plug to forcibly t it to the socket at the risk

of your own safety.

Connect the ground terminal for the AC inlet of this unit to the ground terminal of the building using

an appropriate power cord (bundled).

Install the projector where you can access the power outlet easily.

Safety mark

ENGLISH FRANÇAIS DEUTSCH ESPAÑOL PORTUGUÊS

Descriptions of the

symbols displayed on the

projector

Les descriptions de ces

symboles sont afchées

sur le projecteur

Beschreibungen der am

Projektor angezeigten

Symbole

Descripciones de los

símbolos mostrados en el

proyector

Descrições dos símbolos

apresentados no projector

Alternating Current Courant Alternatif Wechselstrom Corriente alterna Corrente alternada

Standby (Power) Veille (Alimentation) Bereitschaft

(Stromversorgung) En espera (Alimentación) Em espera (Alimentação)

On (Power) Marche (Alimentation) Ein (Stromversorgung) Encendido (Alimentación) Ligado (Alimentação)

Off (Power) Arrêt (Alimentation) Aus (Stromversorgung) Apagado (Alimentación) Desligue (Alimentação)

WARNING / CAUTION AVERTISSEMENT /

ATTENTION

WARNUNG /

VORSICHT

ADVERTENCIA /

PRECAUCIÓN AVISO / PRECAUÇÃO

HIGH TEMPERATURE HAUTE

TEMPERATURE HOHE TEMPERATUR ALTA TEMPERATURA TEMPERATURA ALTA

HIGH VOLTAGE HAUTE TENSION HOCHSPANNUNG ALTO VOLTAJE VOLTAGEM ALTA

HIGH PRESSURE HAUTE PRESSION HOCHDRUCK ALTA PRESIÓN PRESSÃO ALTA

PROJECTOR NOT FOR

CONSUMER USE

PROJECTEUR

DESTINÉ À UN USAGE

PROFESSIONNEL

PROJEKTOR NICHT

FÜR DEN PRIVATEN

GEBRAUCH

PROYECTOR NO

DESTINADO A USO

POR PARTE DE

CONSUMIDORES

PROJECTOR NÃO

DESTINADO AO USO

DE CONSUMIDORES

OPTICAL RADIATION

WAR NI NG

ATTENTION

RAYONNEMENT

LASER

WARNUNG! OPTISCHE

STRAHLUNG

ADVERTENCIA SOBRE

LA RADIACIÓN

ÓPTICA

AVISO DE RADIAÇÃO

ÓPTICA

Kensington Kensington Kensington Kensington Kensington

Warning, Notices and Safety Instructions

ENGLISH FRANÇAIS DEUTSCH ESPAÑOL PORTUGUÊS

Descriptions of the

symbols displayed on the

projector

Les descriptions de ces

symboles sont afchées

sur le projecteur

Beschreibungen der am

Projektor angezeigten

Symbole

Descripciones de los

símbolos mostrados en el

proyector

Descrições dos símbolos

apresentados no projector

Hg MERCURY

CONTAINED

CONTIENT DU

MERCURE QUECKSILBERHALTIG CONTIENE MERCURIO CONTÉM MERCÚRIO

RG2

RG2 caution ATTENTION: RG2 Achtung! RG2 Precaución sobre RG2 Atenção RG2

AVOID EYE CONTACT TO THE LIGHT

DO NOT LOOK INTO

THE BEAM

NE PAS REGARDER

DANS LE FAISCEAU

NICHT IN DEN

STRAHL BLICKEN NO MIRE AL HAZ NÃO OLHE PARA O

FEIXE

Laser Warning Avertissement Relatif au

Laser Warnhinweis zum Laser Advertencia Relacionada

con el Láser Aviso Relativo ao Laser

中文 한국어 РУССКИЙ 日本語

投影机上显示的标志符

号说明

프로젝터에 표시되 어

있는 기호에 대 한 설명

Описания символов,

отображаемых на

проекторе

機器上に表示しているシ

ンボル説明

交流电 교류 전류 Переменный ток 交流電流

待机（电源） 스탠바이(전원) Ожидание (питание) スタンバイ（電源）

开启（电源） 온(전원) Включено (питание) オン(電源)

关闭（电源） 끄기 (전원) выключено (питание) オフ (電源)

警告 / 注意事项 경고 / 주의 ПРЕДУПРЕЖДЕНИЕ /

ВНИМАНИЕ 注意 / 警告

小心高温 고온 주의 ВЫСОКАЯ

ТЕМПЕРАТУРА 高温注意

小心触电 감전 주의 ВЫСОКОЕ

НАПРЯЖЕНИЕ 感電注意

小心破裂 파열 주의 ВЫСОКОЕ ДАВЛЕНИЕ 破裂注意

该投影机非普通消费

者使用 비소비자용 프로젝 터

ПРОЕКТОР НЕ

ПРЕДНАЗНАЧЕН ДЛЯ

ПОТРЕБИТЕЛЬСКОГО

ИСПОЛЬЗОВАНИЯ

民生用では無い機器

光辐射警告 광 방사 경고

ПРЕДУПРЕЖДЕНИЕ

ОБ ОПТИЧЕСКОМ

ИЗЛУЧЕНИИ

光放射警告

Kensington Kensington Kensington Kensington

Hg 含水银 수은 함유 РТУТОСОДЕРЖАЩИЙ 水銀含有

RG2

小心RG2 RG2 주의 Внимание RG2 RG2 注意 (覗き込み

禁止)

AVOID EYE CONTACT TO THE LIGHT

禁止直视光束 빔을 들여다 보지

마십시오

НЕ СМОТРИТЕ НА

ЛУЧ 覗き込み禁止

激光警告 레이저 경고 Предупреждение o

Лазерноем Излучении レーザーに関する警告

Warning, Notices and Safety Instructions

Notices you should read prior to the installation of the projector

Take frequent breaks to let your eyes rest

Prolonged viewing of the projector screen could strain your eyes. Please be sure to rest your eyes

adequately.

Installation environment for the projector

You should avoid installing the projector at place of excessive dampness, dust or smoke. If installation

in such environment is unavoidable, be sure to have the interior of the projector.

Cleaned routinely to prolong the projector's lifecycle. Cleaning of the projector's interior should only

be performed by qualied service personnel dispatched by your local dealer and you should not

attempt to clean the inside of the projector by yourself.

If other light source is directly projected onto the projector screen, the color of the picture from the

projector will appear to be pale and the picture quality will be lower. In addition, your eyes would be

more prone to fatigue. Therefore, it is recommended that the projector be installed in places without

direct exposure to sunlight or other sources of intense light.

The ideal operating temperature range for the projector is between 0°C ~ 40°C (32°F ~ 104°F)

The ideal storage temperature range for the projector is between -10°C~ 60°C (14°F ~ 140°F)

Congurationsforprojectoroperationathighaltitudes

When operating the projector at higher altitudes, be sure to manually set the fan mode to "High" or

it could shorten the life of the optical system in the projector. High altitude is dened as places being

1219 meters (4000 feet) or higher.

Please refer to “ Page 66 : Fan Speed ”.

Protect the projector with care

When placing the projector at a high position, be sure to secure the projector rmly so that it would

not fall and cause injuries. Take care to protect the projector's lens from collision, abrasion or other

damages. Be sure to close the lens cover or cover the projector with a dust cover if you need to store

the projector or if it will not be used for an extended time.

Keep the projector's ventilation inlets and outlets free from obstructions

Note the direction of air ow at the designated spot of installation. Do not let the hot air released from

the outlet ow back to the inlet as it will prevent proper cooling and lead to damage of the projector's

internal structure.

In the event of high temperature due to malfunctioning of the internal cooling fan caused by clogging

at the ventilation inlets and outlets, the projector will activate its automatic protection mode and

shutdown. When this happens, it does not necessary mean that the equipment is malfunctioning. Try

to unplug the power cord from the wall outlet and wait for approximately 15 minutes before operating

the projector again (remember to remove the objects that have caused poor ventilation so that the

projector will not go into the protection mode again).

Autres manuels pour LP-WU6600

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Hitachi Projecteur

Hitachi

Hitachi CP-X2530WN Manuel utilisateur

Hitachi

Hitachi CP-X2 - XGA LCD Projector Manuel utilisateur

Hitachi

Hitachi CP-X2020 Manuel utilisateur

Hitachi

Hitachi ED-D10N Manuel utilisateur

Hitachi

Hitachi CP-SX635 - SXGA+ LCD Projector Document technique

Hitachi

Hitachi CP-X301 series Manuel utilisateur

Hitachi

Hitachi ED-X30 Manuel utilisateur

Hitachi

Hitachi CP-D31N guide Manuel utilisateur

Hitachi

Hitachi CP-TW2505 Manuel utilisateur

Hitachi

Hitachi CP-X2 series Manuel utilisateur

Hitachi

Hitachi CP-X445 Document technique

Hitachi

Hitachi X807 - CP XGA LCD Projector Mode d’emploi

Hitachi

Hitachi CP-X2542WN Manuel utilisateur

Hitachi

Hitachi CPX608 - XGA LCD Projector Manuel utilisateur

Hitachi

Hitachi CP-X380W Manuel d'utilisation et d'entretien

Hitachi

Hitachi CP-SX5500 Manuel utilisateur

Hitachi

Hitachi CP-AX2505 Manuel utilisateur

Hitachi

Hitachi CPX870D Manuel utilisateur

Hitachi

Hitachi CPX444 - XGA LCD Projector Manuel utilisateur

Hitachi

Hitachi X308 - CP XGA LCD Projector Manuel utilisateur

Hitachi

Hitachi CP-CW251WN Manuel utilisateur

Hitachi

Hitachi CP-RX80W Manuel utilisateur

Hitachi

Hitachi CP-X4011N Manuel utilisateur

Hitachi

Hitachi CP-RX82 Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur