Hitachi CP-X385W Manuel utilisateur

LCD Projector CP-X385W

USER'S MANUAL

USER'S MANUAL Vol.1 (Basic)

Page

PROJECTOR FEATURES................2

PREPARATIONS ..............................2

PART NAMES...................................4

SETTING UP

THE PROJECTOR ............................6

CONNECTING

YOUR DEVICES................................8

USING THE REMOTE

CONTROL.......................................13

TURNING ON THE POWER ...........14

TURNING OFF THE POWER .........16

ADJUSTING THE VOLUME ...........17

TEMPORARILY MUTING

THE SOUND....................................17

ADJUSTING THE POSITION..........18

USING THE AUTOMATIC

ADJUSTMENT FEATURE ..............19

Page

CORRECTING KEYSTONE

DISTORTIONS ................................20

USING THE MAGNIFY

FEATURE........................................21

FREEZING THE SCREEN ..............21

SIGNAL SEARCHING.....................22

SELECTING THE ASPECT

RATIO..............................................22

TEMPORARILY BLANKING

THE SCREEN..................................22

USING THE MENU

FUNCTIONS....................................23

OPERATING THE PC SCREEN .....24

THE LAMP ......................................25

THE AIR FILTER.............................27

THE HANDLE..................................29

OTHER CARE.................................29

CONTENTS

Thank you for purchasing this projector.

• The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in this manual

• The reproduction, transmission or use of this document or contents is not permitted without express

written authority.

TRADEMARK ACKNOWLEDGEMENT :

•PS/2, VGA and XGA are registered trademarks of the International Business Machines Corporation.

•Apple, Mac and ADB are registered trademarks of Apple Computer, Inc.

•VESA and SVGA are trademarks of the Video Electronics Standard Association.

•Windows is a registered trademark of Microsoft Corporation.

•All other trademarks are the property of their respective owners.

NOTE

WARNING • Please read the accompanying manual “SAFETY

INSTRUCTIONS” and this “USER'S MANUAL” thoroughly to ensure correct

usage through understanding. After reading, store this instruction manual in a

safe place for future reference.

01CPX385/EN最終02.11.74:15PMページ1

●

Ultra High Brightness

Crisp, ultra-bright presentations is achieved

by using a UHB (ultra high brightness) lamp

and a highly efficient optical system

●

Partial Magnification Function

Interesting parts of images can be magnified

for closer viewing

●

Keystone Distortion Correction

Quick correction of distorted images electrically

●

Whisper Mode Equipped

Special mode is available for reducing

projector noise to achieve quieter operation

PREPARATIONS Your projector should come with the items

shown below. Check to make sure that all the

items are included. Contact your dealer if

anything is missing.

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

NORSK

PORTGÊS

中中文文

REGULATORY

NOTICES

USER'S MANUAL Vol.1 Basic

Pleaseread this user's manual thoroughly to ensure correct usage through understanding.

BEDIENUNGSANLEITUNG Teil 1 Grundlagen

Bittelessen Sie diese Benutzerhandbuch zugunsten der korrekten Bedienung aufmerksam.

MANUEL D'UTILISATION Vol.1Fondements

Nousvous recommandons de lire attentivement ce manuel pour bien assimiler le fonctionnement de

l'appareil.

MANUALE D'ISTRUZIONI Vol.1 Informazioni di base

Vipreghiamo voler leggere attentamente il manuale d'istruzioni in modo tale da poter comprendere

quantoriportato ai fini di un corretto utilizzo del proiettore.

MANUAL DE USUARIO Vol.1 Básico

Leacuidadosamente este manual del usuario para poder utilizar corretamente el producto.

GEBRUIKSAANWIJZING Vol.1 Basis

Leesvoor het qebruik alstublieft deze handleiding aandachtig door, om volledig profijt te hebben van

deuitgebreide mogelijkheden.

BRUKERHÅNDBOK Vol.1 Grunnleggende

Vennligstles denne bruksanvisningen grundig for å være garantert driftssikker bruk.

INSTRUÇÕES DO PROPRIETÁRIO Vol.1 Básico

Paraassegurar o uso correto do equipamento, por favor leia atentamente este manual do utilizador.

Liquid Crystal Projector

CP-X385W

User's Manuals

(Vol.1/Vol.2)

Safety Instructions

Power cord

(US Type)

Power cord

(UK Type) Power cord

(Europe Type)

RGB cable

Two AA batteries

(for the remote

control)

Video/Audio cable

PROJECTOR

FEATURES

This liquid crystal projector is used to project

various computer signals as well as NTSC / PAL /

SECAM video signals onto a screen. Little space

is required for installation and large images can

easily be realized.

•Keep the original packing material for future reshipment.

NOTE

Carrying Bag

Mouse cable

(PS/2)

Handle

STANDBY/ON

LASER

BLANK

RGB

VIDEO

AUTO

ENTER

KEYSTONE

RESET

FREEZEASPECT

ESC

MAGNIFY

POSITION

OFFON

VOLUME

MUTE

Remote Control

Transmitter

Projector

(with Lens Cap)

01CPX385/EN最終02.11.74:15PMページ2

1Connect your devices to the projector

Connect your computer, VCR and/or other

devices you will be using to the projector.

Insert the batteries into the remote

control

3Connect the power cord

(1)

Connect the connector of the electrical power cord to the AC inlet of the main unit.

(2) Firmly plug the power cord's plug into the outlet

WARNING Precautions to observe in regards to the power cord: Please use extra

caution when connecting the projector's power cord as incorrect or faulty

connections may result in FIRE AND/OR ELECTRICAL SHOCK. Please adhere to the

following safety guidelines to insure safe operation of the projector:

•

Only plug the power cord into outlets rated for use with the power cord's specified voltage range.

•Only use the power cord that came with the projector.

•NEVER ATTEMPT TO DEFEAT THE GROUND CONNECTION OF THE THREE-

PRONGED PLUG!

•Make sure that you firmly connect the power cord to the projector and wall outlet.

〜

812

(1)

(2)

Power outlet

Power cord AC inlet

01CPX385/EN最終02.11.74:15PMページ3

PART NAMES THE PROJECTOR

Indicates the corresponding

reference page

Power Switch

AC Inlet

(to the Power Cord)

Ventilation Openings

(Intake)

Zoom Ring

Focus Ring

Remote Control

Sensor

Lens

Lens Cap

Speaker

Handle Hook

STANDBY/ON Button

KEYSTONE Button

Foot Adjuster Button

Filter Cover

Rear Foot Adjuster

INPUT Button

LAMP Indicator

TEMP Indicator

POWER Indicator

RESET Button

MENU Button

Ventilation Openings

(exhaust)

TERMINAL PANEL

S-VIDEO Port

COMPONENT VIDEO

Y Port

CB/PBPort

CR/PRPort

VIDEO IN Port

AUDIO IN R Port

AUDIO IN L Port

AUDIO IN 1 Port

AUDIO IN 2 Port

AUDIO OUT Port

Remote Control

Sensor

RGB IN 1

Port

RGB IN 2

Port

CONTROL

Port

RGB OUT

Port

USB

Port

AUDIO IN VIDEO IN S-VIDEO IN

AUDIO

AUDIO OUT

2 USB

RGB IN

RGB OUT CONTROL

( )

Foot Adjuster

Air Filter and Intake

for the Cooling Fan

01CPX385/EN最終02.11.74:15PMページ4

THE REMOTE CONTROL

RGB button

VIDEO button 15

KEYSTONE button

ENTER button

RESET button

BLANK button

LASER button

MOUSE / RIGHT

Button

Disk Pad 24

MENU button 23

AUTO button 19

,,,

Cursor buttons

POSITION button 18

ASPECT button 22

MAGNIFY button 21

ESC button

FREEZE button

MUTE button

VOLUME button

SEARCH button

STANDBY/ON

LASER

BLANK

RGB

VIDEO

AUTO

ENTER

KEYSTONE

RESET

FREEZEASPECT

ESC

MAGNIFY

POSITION

OFFON

VOLUME

MUTE

STANDBY/ON

button 14

•Keep the remote control transmitter away from children and pets.

•Do not give the remote control transmitter any physical impact. Take care not to drop.

•Do not place the heavy objects on the remote control transmitter.

•Do not wet the remote control transmitter or place it on any wet object.

•Do not place the remote control transmitter close to the cooling fan of the projector.

•Do not disassemble the remote control transmitter.

NOTE

WARNING •The laser pointer of the remote control transmitter is used in

place of a finger or rod. Never look directly into the laser beam outlet or point

the laser beam at other people. The laser beam can cause vision problems.

Complies with 21 CFR 1040. 10 and 1040. 11 except for deviations

pursuant to Laser Notice No.50, dated 2001.7.26

SMK CORPORATION

6-5-5 Togoshi Shinagawa-ku, Tokyo, JAPAN 142-8511

MANUFACTURED

Novemver 2001

PLACE OF MANUFACTURER: A

CAUTION

LASER RADIATION-

DO NOT STARE INTO BEAM

MAX. OUTPUT: 1mW

WAVE LENGTH

: 650nm

CLASS2 LASER PRODUCT

LASER RADIATION

IEC60825-1 : 1993+A1:1997

MAX. OUTPUT: 1mW

WAVE LENGTH: 650nm

DO NOT STARE INTO BEAM

CLASS2 LASER PRODUCT

AVOID EXPOSURE-

LASER RADIATIONS IS

EMITTED FROM THIS

APERTURE

01CPX385/EN最終02.11.74:15PMページ5

Angle Adjustment

1Lift up the front side of the

projector, and pressing the foot

adjuster button, adjust the

projection angle.

2Release the button to lock at the desired angle.

3Turn the rear foot adjuster to adjust

the left-right slope. Do not force the

foot adjuster screws. This could

damage the adjusters or cause the

lock to fail.

Use the foot adjusters on the bottom of the projector to adjust the projection

angle. It is variable within 0˚to 9˚approximately.

CAUTION •

Install the projector in a suitable environment according to instructions

of the accompanying manual “SAFETY INSTRUCTIONS”and this manual.

•If you press the elevator buttons without holding the projector, the projector might

crash down, overturn, smash your fingers and possibly result in malfunction. To

prevent damaging the projector and injuring yourself, ALWAYS HOLD THE

PROJECTOR whenever using the elevator buttons to adjust the elevator feet.

SETTING UP THE PROJECTOR

Press the foot adjuster button

Rear Foot Adjuster

01CPX385/EN最終02.11.74:15PMページ6

Refer to the illustrations and tables below to determine the screen size and

projection distance.

Adjusting the Screen Size and Projection Distance

If 4:3 aspect ratio

The values shown in the table are calculated for a full size screen

a:Distance from the projector to the screen (±10%)

b:Distance from the lens center to the bottom of the screen (±10%)

c:Distance from the lens center to the top of the screen (±10%)

Top View

Side View

Screen size

[inches (m)]

a[inches (m)]

Min. Max.

40 (1.0) 62 (1.6) 82 (2.1)

60 (1.5) 94 (2.4) 123 (3.1)

80 (2.0) 127 (3.2) 164 (4.2)

100 (2.5) 160 (4.1) 205 (5.2)

120 (3.0) 192 (4.9) 246 (6.3)

150 (3.8) 241 (6.1) 308 (7.8)

200 (5.0) 323 (8.2) 411 (10.4)

01CPX385/EN最終02.11.74:15PMページ7

Display monitors

DVD players

VCRs

Laptop computers

Desktop computers

Indicates the

corresponding

reference page

ATTENTION

Precautions to observe when connecting other devices to the projector

•Whenever attempting to connect other devices to the projector, please thoroughly

read the manual of each device to be connected.

•TURN OFF ALL DEVICES prior to connecting them to the projector. Attempting to

connect a live device to the projector may generate extremely loud noises or other

abnormalities that may result in malfunction and/or damage to the device and/or

projector. Refer to the “TECHNICAL”of the USER’S MANUAL (Vol.2) for the pin

assignment of connectors and RS-232C communication data.

•Make sure that you connect devices to the correct port. Incorrect connection may

result in malfunction and/or damage to the device and/or projector.

•A component cable and some other cables have to be used with core set. Use the

accessory cable or a designated-type cable for the connection. For cables that have

a core only at one end, connect the core to the projector.

•Secure the screws on the connectors and tighten.

CONNECTING YOUR DEVICES

Devices You Can Connect to the Projector

(Refer to this section for planning your device

configuration to use for your presentation.)

CAUTION •Incorrect connecting could result in fire or electrical shock. Please

read this manual and the separate “SAFETY INSTRUCTIONS”.

01CPX385/EN最終02.11.74:15PMページ8

Ports and Cables

Refer to the table below to find out which projector port and cable to use for connecting a

given device. Use this table for determining which cables to prepare.

About Plug-and-Play Capability

•This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by

connecting this projector to computers that are VESA DDC (display data channel)

compatible. Please take advantage of this function by connecting the accessory RGB

cable to the RGB IN 1 port (DDC 1/2B compatible). Plug-and-Play may not work

properly if any other type of connection is attempted.

•Plug-and-Play is a system composed of the computer, its operating system and

peripheral equipment (i.e. display devices).

•Please use the standard drivers as this projector is a Plug-and-Play monitor.

•Plug-and-Play may not function properly with some type of computers. Use the RGB

IN 2 port if Plug-and-Play does not function correctly.

NOTE

Function Projector Port Connection Cables

RGB input

RGB IN 1 Accessory RGB cable or optional RGB

cable with D-sub 15-pin shrink jack and

inch thread screws

RGB IN 2

RGB output RGB OUT

Audio input

(from the computer)

AUDIO IN 1

(interlocked with RGB IN 1)

Optional audio cable with stereo mini jack

AUDIO IN 2

(interlocked with RGB IN 2)

USB mouse control USB Optional USB cable

PS/2 mouse control

CONTROL

Accessory PS/2 mouse cable

ADB mouse control Optional ADB mouse cable

Serial mouse control Optional serial mouse cable

RS-232C communication Optional RS-232C cable

S-video input S-VIDEO IN Optional S-video cable with mini DIN 4-pin

jack

Video input VIDEO IN Accessory audio/video cable

Component video input

COMPONENT VIDEO Y

Optional component video cableCOMPONENT VIDEO CB/PB

COMPONENT VIDEO CR/PR

Audio input

(from video equipment)

AUDIO IN L Accessory audio/video cable or optional

audio cable with RCA jack

AUDIO IN R

Audio output AUDIO OUT Optional audio cable with stereo mini jack

01CPX385/EN最終02.11.74:15PMページ9

AUDIO IN

AUDIO cable

RGB cable

AUDIO OUT

RGB IN Analogue

RGB OUT

AUDIO IN VIDEO IN S-VIDEO IN

AUDIO

AUDIO OUT

2 USB

RGB IN

RGB OUT CONTROL

Laptop computer

USB IN USB OUT

AUDIO IN AUDIO OUT

RGB IN Analogue

RGB OUT

CONTROL IN CONTROL OUT

If connecting to a

USB port equipped

computer

RGB cable

AUDIO cable

USB cable

MOUSE cable

AUDIO IN VIDEO IN S-VIDEO IN

AUDIO

AUDIO OUT

2USB

RGB IN

RGB OUT CONTROL

Desktop computer

CONNECTING YOUR DEVICES (continued)

Connecting to a Computer

ATTENTION Whenever attempting to connect a laptop computer to the projector,

be sure to activate the laptop's RGB external image output (set the laptop to CRT

display or to simultaneous LCD and CRT display). For details on how this is done,

please refer to the instruction manual of the corresponding laptop computer.

•Some computers may have multiple display screen modes. Use of some of these

modes will not be possible with this projector.

•For some RGB input modes, the optional Mac adapter is necessary.

NOTE

01CPX385/EN最終02.11.74:15PMページ10

Autres manuels pour CP-X385W

Table des matières

Autres manuels Hitachi Projecteur

Hitachi

Hitachi CP-TW3003 Manuel utilisateur

Hitachi

Hitachi CP-DW10N Manuel utilisateur

Hitachi

Hitachi CP-WU8460 Manuel utilisateur

Hitachi

Hitachi CP-X2541WN Manuel utilisateur

Hitachi

Hitachi CP-X300 Manuel utilisateur

Hitachi

Hitachi CP-X615W and Document technique

Hitachi

Hitachi CP-X250 series Manuel utilisateur

Hitachi

Hitachi Innovate CP-SX635 Manuel utilisateur

Hitachi

Hitachi X308 - CP XGA LCD Projector Guide de démarrage rapide

Hitachi

Hitachi Innovate ED-A101 Manuel utilisateur

Hitachi

Hitachi CP-X325W Manuel utilisateur

Hitachi

Hitachi CP-WU8451 Manuel utilisateur

Hitachi

Hitachi LP-WU6600 Manuel utilisateur

Hitachi

Hitachi CP-X328W Manuel utilisateur

Hitachi

Hitachi CP-AW250NM Manuel utilisateur

Hitachi

Hitachi 8788 Manuel utilisateur

Hitachi

Hitachi ED-A100 - XGA LCD Projector Instructions d'installation et d'entretien

Hitachi

Hitachi ED-X8250 series Manuel utilisateur

Hitachi

Hitachi CP-X809W Manuel utilisateur

Hitachi

Hitachi LP-EW5002 Manuel utilisateur

Hitachi

Hitachi CPX1 Series Manuel utilisateur

Hitachi

Hitachi CP-A302WNM Manuel utilisateur

Hitachi

Hitachi PJTX10W Manuel utilisateur

Hitachi

Hitachi CPX605 - 4000 Lumens XGA LCD Projector Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur