HIK VISION DS-K1T642M Manuel utilisateur

Face Recognion Terminal

User Manual

Legal Informaon

About this Manual

The Manual includes instrucons for using and managing the Product. Pictures, charts, images and

all other informaon hereinaer are for descripon and explanaon only. The informaon

contained in the Manual is subject to change, without noce, due to rmware updates or other

reasons. Please nd the latest version of this Manual at the Hikvision website ( hps://

www.hikvision.com/ ).

Please use this Manual with the guidance and assistance of professionals trained in supporng the

Product.

Trademarks

and other Hikvision's trademarks and logos are the properes of

Hikvision in various jurisdicons.

Other trademarks and logos menoned are the properes of their respecve owners.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT

DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH

ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING

WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR

PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION

BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,

INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS

INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,

WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,

OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY

RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,

PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS

INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY

TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE

SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.

ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT

INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF

PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.

YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE

Face Recognion Terminal User Manual

DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR

PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED

TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN

RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER

PREVAILS.

Data Protecon

During the use of device, personal data will be collected, stored and processed. To protect data,

the development of Hikvision devices incorporates privacy by design principles. For example, for

device with facial recognion features, biometrics data is stored in your device with encrypon

method; for ngerprint device, only ngerprint template will be saved, which is impossible to

reconstruct a ngerprint image.

As data controller, you are advised to collect, store, process and transfer data in accordance with

the applicable data protecon laws and regulaons, including without limitaon, conducng

security controls to safeguard personal data, such as, implemenng reasonable administrave and

physical security controls, conduct periodic reviews and assessments of the eecveness of your

security controls.

Face Recognion Terminal User Manual

Symbol Convenons

The symbols that may be found in this document are dened as follows.

Symbol Descripon

Danger

Indicates a hazardous situaon which, if not avoided, will or could

result in death or serious injury.

Cauon

Indicates a potenally hazardous situaon which, if not avoided, could

result in equipment damage, data loss, performance degradaon, or

unexpected results.

Note Provides addional informaon to emphasize or supplement

important points of the main text.

Face Recognion Terminal User Manual

iii

Regulatory Informaon

FCC Informaon

Please take aenon that changes or modicaon not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

FCC compliance: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protecon against harmful interference in a residenal installaon. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in accordance

with the instrucons, may cause harmful interference to radio communicaons. However, there is

no guarantee that interference will not occur in a parcular installaon. If this equipment does

cause harmful interference to radio or television recepon, which can be determined by turning

the equipment o and on, the user is encouraged to try to correct the interference by one or more

of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separaon between the equipment and receiver.

—Connect the equipment into an outlet on a circuit dierent from that to which the receiver is

connected.

—Consult the dealer or an experienced radio/TV technician for help

This equipment should be installed and operated with a minimum distance 20cm between the

radiator and your body.

FCC Condions

This device complies with part 15 of the FCC Rules. Operaon is subject to the following two

condions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause

undesired operaon.

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked with "CE"

and comply therefore with the applicable harmonized European standards listed

Face Recognion Terminal User Manual

under the EMC Direcve 2014/30/EU, RE Direcve 2014/53/EU,the RoHS Direcve

2011/65/EU

2012/19/EU (WEEE direcve): Products marked with this symbol cannot be disposed

of as unsorted municipal waste in the European Union. For proper recycling, return

this product to your local supplier upon the purchase of equivalent new equipment,

or dispose of it at designated collecon points. For more informaon see:

www.recyclethis.info

2006/66/EC (baery direcve): This product contains a baery that cannot be

disposed of as unsorted municipal waste in the European Union. See the product

documentaon for specic baery informaon. The baery is marked with this

symbol, which may include leering to indicate cadmium (Cd), lead (Pb), or mercury

(Hg). For proper recycling, return the baery to your supplier or to a designated

collecon point. For more informaon see:www.recyclethis.info

Face Recognion Terminal User Manual

Safety Instrucon

These instrucons are intended to ensure that user can use the product correctly to avoid danger

or property loss.

The precauon measure is divided into Dangers and Cauons:

Dangers: Neglecng any of the warnings may cause serious injury or death.

Cauons: Neglecng any of the cauons may cause injury or equipment damage.

Dangers: Follow these safeguards to prevent

serious injury or death.

Cauons: Follow these precauons to prevent

potenal injury or material damage.

Danger:

●All the electronic operaon should be strictly compliance with the electrical safety regulaons,

re prevenon regulaons and other related regulaons in your local region.

●Please use the power adapter, which is provided by normal company. The power consumpon

cannot be less than the required value.

●Do not connect several devices to one power adapter as adapter overload may cause over-heat

or re hazard.

●Please make sure that the power has been disconnected before you wire, install or dismantle the

device.

●When the product is installed on wall or ceiling, the device shall be rmly xed.

●If smoke, odors or noise rise from the device, turn o the power at once and unplug the power

cable, and then please contact the service center.

●1. Risk of explosion if the baery is replaced by an incorrect type

2. Improper replacement of the baery with an incorrect type may defeat a safeguard (for

example, in the case of some lithium baery types).

3. This equipment is not suitable for use in locaons where children are likely to be present.

4. Do not dispose of the baery into re or a hot oven, or mechanically crush or cut the baery,

which may result in an explosion.

5. Do not leave the baery in an extremely high temperature surrounding environment, which

may result in an explosion or the leakage of ammable liquid or gas.

6. Do not subject the baery to extremely low air pressure, which may result in an explosion or

the leakage of ammable liquid or gas.

7. Dispose of used baeries according to the instrucons

●If the product does not work properly, please contact your dealer or the nearest service center.

Never aempt to disassemble the device yourself. (We shall not assume any responsibility for

problems caused by unauthorized repair or maintenance.)

Face Recognion Terminal User Manual

Cauons:

●Do not drop the device or subject it to physical shock, and do not expose it to high

electromagnesm radiaon. Avoid the equipment installaon on vibraons surface or places

subject to shock (ignorance can cause equipment damage).

●Do not place the device in extremely hot (refer to the specicaon of the device for the detailed

operang temperature), cold, dusty or damp locaons, and do not expose it to high

electromagnec radiaon.

●The device cover for indoor use shall be kept from rain and moisture.

●Exposing the equipment to direct sun light, low venlaon or heat source such as heater or

radiator is forbidden (ignorance can cause re danger).

●Do not aim the device at the sun or extra bright places. A blooming or smear may occur

otherwise (which is not a malfuncon however), and aecng the endurance of sensor at the

same me.

●Please use the provided glove when open up the device cover, avoid direct contact with the

device cover, because the acidic sweat of the ngers may erode the surface coang of the device

cover.

●Please use a so and dry cloth when clean inside and outside surfaces of the device cover, do

not use alkaline detergents.

●Please keep all wrappers aer unpack them for future use. In case of any failure occurred, you

need to return the device to the factory with the original wrapper. Transportaon without the

original wrapper may result in damage on the device and lead to addional costs.

●Improper use or replacement of the baery may result in hazard of explosion. Replace with the

same or equivalent type only. Dispose of used baeries according to the instrucons provided by

the baery manufacturer.

●Biometric recognion products are not completely applicable to an-spoong environments. If

you require a higher security level, use mulple authencaon modes.

●Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power

Source with 100~240 VAC or 12 VDC according to the IEC60950-1 standard. Please refer to

technical specicaons for detailed informaon.

Face Recognion Terminal User Manual

vii

Available Models

Product Name Model

Face Recognion Terminal DS-K1T642M

DS-K1T642MF

DS-K1T642E

DS-K1T642EF

DS-K1T642MW

DS-K1T642MFW

DS-K1T642EW

DS-K1T642EFW

Use only power supplies listed in the user instrucons:

Model Manufacturer Standard

ADS-26FSG-12 12024EPG Shenzhen Honor Electronic

Co.,Ltd

MSA-C2000IC12.0-24P-DE MOSO Technology Co.,Ltd PDE

ADS-26FSG-12 12024EPB Shenzhen Honor Electronic

Co.,Ltd

ADS-26FSG-12 12024EPCU/EPC Shenzhen Honor Electronic

Co.,Ltd

PCU

ADS-26FSG-12 12024EPI-01 Shenzhen Honor Electronic

Co.,Ltd

ADS-26FSG-12 12024EPBR Shenzhen Honor Electronic

Co.,Ltd

PBR

Face Recognion Terminal User Manual

viii

Contents

Chapter 1 Overview .................................................................................................................... 1

1.1 Overview ................................................................................................................................ 1

1.2 Features ................................................................................................................................. 1

Chapter 2 Appearance ................................................................................................................ 2

Chapter 3 Installaon ................................................................................................................. 4

3.1 Installaon Environment ........................................................................................................ 4

3.2 Wall Mounng ....................................................................................................................... 4

3.3 Base Mounng (Oponal) ...................................................................................................... 8

Chapter 4 Wiring ...................................................................................................................... 11

4.1 Terminal Descripon ............................................................................................................ 11

4.2 Wire Normal Device ............................................................................................................. 12

4.3 Wire Secure Door Control Unit ............................................................................................ 13

4.4 Wire Fire Module ................................................................................................................. 13

4.4.1 Wiring Diagram of Door Open When Powering O .................................................... 13

4.4.2 Wiring Diagram of Door Locked When Powering O .................................................. 15

Chapter 5 Acvaon ................................................................................................................. 17

5.1 Acvate via Device ............................................................................................................... 17

5.2 Acvate via Web Browser .................................................................................................... 18

5.3 Acvate via SADP ................................................................................................................. 19

5.4 Acvate Device via Client Soware ...................................................................................... 20

Chapter 6 Quick Operaon ....................................................................................................... 22

6.1 Select Language ................................................................................................................... 22

6.2 Set Password Change Type ................................................................................................... 22

6.3 Set Applicaon Mode .......................................................................................................... 23

6.4 Set Network Parameters ...................................................................................................... 24

6.5 Access to Plaorm ............................................................................................................... 25

Face Recognion Terminal User Manual

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels HIK VISION Terminal tactile

HIK VISION

HIK VISION DS-K5671-3XF/ZU Manuel utilisateur

HIK VISION

HIK VISION DS-K1T342 Series Manuel utilisateur

HIK VISION

HIK VISION DS-K1T341B Series Manuel utilisateur

HIK VISION

HIK VISION DS-K1T341BMWI-T Manuel utilisateur

HIK VISION

HIK VISION DS-K1T981 Series Manuel utilisateur

HIK VISION

HIK VISION DS-K1T502 Series Mode d'emploi

HIK VISION

HIK VISION DS-K1A8503 Series Manuel utilisateur

HIK VISION

HIK VISION DS-TPW332-C Manuel utilisateur

HIK VISION

HIK VISION DS-K1T673 Manuel utilisateur

HIK VISION

HIK VISION UD02454B Manuel utilisateur

HIK VISION

HIK VISION DS-K1T680DG Manuel utilisateur

HIK VISION

HIK VISION DS-K5672MW-Z Manuel utilisateur

HIK VISION

HIK VISION DS-K1T320 Series Manuel utilisateur

HIK VISION

HIK VISION DS-K5604A-3XF Series Manuel utilisateur

HIK VISION

HIK VISION DS-K1T606 series Manuel utilisateur

HIK VISION

HIK VISION DS-MDH005-B Manuel utilisateur

HIK VISION

HIK VISION MinMoe DS-K1T671TM-3XF Manuel utilisateur

HIK VISION

HIK VISION DS-K1T680 Series Manuel utilisateur

HIK VISION

HIK VISION DS-K1T604M Manuel utilisateur

HIK VISION

HIK VISION DS-TCP345-K Manuel utilisateur

HIK VISION

HIK VISION Ultra Series Manuel utilisateur

HIK VISION

HIK VISION DS-K1T321 Series Manuel utilisateur

HIK VISION

HIK VISION DS-K1T321 Series Manuel utilisateur

HIK VISION

HIK VISION DS-K1T802 Manuel utilisateur

Manuels Terminal tactile populaires d'autres marques

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuel utilisateur

Ingenico

Ingenico AXIUM EX4000 Manuel utilisateur

Heisei Electronics

Heisei Electronics Q-POS 815 Manuel utilisateur

Amano

Amano MTX-15 Manuel utilisateur

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuel utilisateur

Demco

Demco SP7 Manuel utilisateur

Lathem

Lathem PC600 Series Manuel utilisateur

Partner

Partner MF-2352 Manuel utilisateur

NCR

NCR RealPOS 7460-2 Manuel

Simrad

Simrad MS50 Instructions de montage

Unitech

Unitech MR350 MKII Guide de démarrage rapide

Jungheinrich

Jungheinrich WMT 210 Manuel utilisateur

Motorola

Motorola MTP850 Manuel utilisateur

YASKAWA

YASKAWA 62H-MDC0 Manuel utilisateur

MVG industries

MVG industries NeptuLink Manuel utilisateur

Price Industries Limited

Price Industries Limited FDC Manuel d'instructions

Honeywell

Honeywell TemaKey Manuel utilisateur

EBN

EBN BPC65-B-A16G Manuel utilisateur