HIK VISION IDS-TCM403-A Manuel utilisateur

Network Traffic Camera

Quick Start Guide

English

reserved.

This Manual is the property of Hangzhou Hikvision Digital Technology Co.,

Ltd. or its affiliates (hereinafter referred to as "Hikvision"), and it cannot

be reproduced, changed, translated, or distributed, partially or wholly, by

any means, without the prior written permission of Hikvision. Unless

otherwise expressly stated herein, Hikvision does not make any warranties,

guarantees or representations, express or implied, regarding to the

Manual, any information contained herein.

About this Manual

The Manual includes instructions for using and managing the Product.

Pictures, charts, images and all other information hereinafter are for

description and explanation only. The information contained in the

Manual is subject to change, without notice, due to firmware updates or

other reasons. Please find the latest version of this Manual at the Hikvision

website (https://www.hikvision.com/).

Please use this Manual with the guidance and assistance of professionals

trained in supporting the Product.

Trademarks Acknowledgement

and other Hikvision’s trademarks and logos are the

properties of Hikvision in various jurisdictions. Other trademarks and

logos mentioned below are the properties of their respective owners.

Other trademarks and logos mentioned are the properties of their

respective owners.

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS

MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE,

SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL

FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR

IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,

SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE

USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL

HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL,

INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,

DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR

LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,

English

WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING

NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH

THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR

INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY

RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER

DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS

INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL

PROVIDE TIMELY TECHNICAL SUPPORT IFREQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE

LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR

USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE

RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT

INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT

LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR

DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE

THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE

DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION,

THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL

WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR

EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN

RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE

APPLICABLE LAW, THE LATER PREVAILS.

Regulatory Information

FCC Information

Please take attention that changes or modification not expressly approved

by the party responsible for compliance could void the user’s authority to

operate the equipment.

FCC compliance: This equipment has been tested and found to comply

with the limits for a Class A digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial

English

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to

correct the interference at his own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied accessories

too are marked with "CE" and comply therefore with the

applicable harmonized European standards listed under

the EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS

Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this

symbol cannot be disposed of as unsorted municipal

waste in the European Union. For proper recycling, return

this product to your local supplier upon the purchase of

equivalent new equipment, or dispose of it at designated collection points.

For more information see: www.recyclethis.info

2006/66/EC (battery directive): This product contains a

battery that cannot be disposed of as unsorted municipal

waste in the European Union. See the product

documentation for specific battery information. The

battery is marked with this symbol, which may include

lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper

recycling, return the battery to your supplier or to a designated collection

point. For more information see: www.recyclethis.info

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

English

Safety Instructions

Use of the product must be in strict compliance with the local laws and

regulations. Please shut down the device in prohibited area.

Use of the product must be in strict compliance with the local electrical

safety regulations.

Use the power adapter provided by qualified manufacturer. Refer to the

product specification for detailed power requirements.

It is recommended to provide independent power adapter for each

device as adapter overload may cause over-heating or a fire hazard.

Make sure that the power has been disconnected before you wire, install,

or disassemble the device.

DO NOT directly touch exposed contacts and components once the

device is powered up to avoid electric shock.

DO NOT use damaged power supply devices (e.g., cable, power adapter,

etc.) to avoid electric shock, fire hazard, and explosion.

DO NOT directly cut the power supply to shut down the device. Please

shut down the device normally and then unplug the power cord to avoid

data loss.

DO NOT block the power supply equipment to plug and unplug

conveniently.

Make sure the power supply has been disconnected if the power adapter

is idle.

Make sure the device is connected to the ground firmly.

To avoid heat accumulation, good ventilation is required for a proper

operating environment.

Store the device in dry, well-ventilated, corrosive-gas-free, no direct

sunlight, and no heating source environment.

Avoid fire, water, and explosive environment when using the device.

Avoid lightning strike for device installation. Install a lightning arrester if

necessary.

Keep the device away from magnetic interference.

Avoid device installation on vibratory surfaces or places. Failure to

comply with this may cause device damage.

English

DO NOT touch the heat dissipation component to avoid burns.

DO NOT expose the device to extremely hot, cold, or humidity

environments. For temperature and humidity requirements, see device

specification.

If smoke, odor, or noise arises from the device, immediately turn off the

power, unplug the power cable, and contact the service center.

If the device is abnormal, contact the store you purchased it or the

nearest service center. DO NOT disassemble or modify the device in any

way (For the problems caused by unauthorized modification or

maintenance, the company shall not take any responsibility).

Keep all packaging after unpacking them for future use. In case of any

failure occurred, you need to return the device to the factory with the

original wrapper. Transportation without the original wrapper may result

in damage to the device and the company shall not take any

responsibility.

Please enforce the protection for the personal information and the data

security as the device may be confronted with the network security

problems when it is connected to the Internet. Contact us if network

security risks occur.

Please understand that you have the responsibility to configure all the

passwords and other security settings about the device, and keep your

user name and password.

DO NOT touch the lens with fingers directly in case the acidic sweat of

the fingers erodes the surface coating of the lens.

DO NOT aim the lens at the strong light such as sun or incandescent lamp.

The strong light can cause fatal damage to the device.

DO NOT disconnect the power during formatting, uploading, and

downloading. Or files may be damaged.

Panel and Cable Overview

Interface

Description

Interface

Description

English

Interface appearances and positions may vary with different models.

Please refer to the actual devices.

Supported interface types and numbers may vary with different models.

Please refer to actual devices.

Auto-Iris Lens

Socket

10M/100M/

1000M

Self-Adaptive

Ethernet

Interface

Reset

TF Card Slot

USB 2.0

Interface

RS-232 Interface

Alarm In

Alarm Out (F1

and F2 support

strobe light

connection.)

Relay Out

RS-485

Interface &

Audio Out

Interface

Audio Interface

Wiegand

Interface

RS-485 Interface

SYNC Interface

GND

Power Indicator

Video Out

Power Input

Sealing Ring

GND

English

The USB interface is not allowed to charge other devices or connect to

other loads.

n in Alarm Out/In interface = 1, 2, 3…

Installation

Interface appearances and installation methods may vary with different

models. This chapter uses one type of device appearance as an example to

show the device installation. Please refer to actual devices for more details.

English

Activation and Login

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels HIK VISION Caméra de sécurité

HIK VISION

HIK VISION TURBO HD 5 MP Manuel utilisateur

HIK VISION

HIK VISION Network Speed Dome Camera Manuel utilisateur

HIK VISION

HIK VISION DS-2TD2667T-15/P Manuel utilisateur

HIK VISION

HIK VISION DS-2CD2012-I Guide de l'utilisateur

HIK VISION

HIK VISION IR Network Speed Dome Manuel utilisateur

HIK VISION

HIK VISION iDS-2CD9136-AIS Manuel utilisateur

HIK VISION

HIK VISION IR Network Speed Dome Manuel utilisateur

HIK VISION

HIK VISION DS-2DT6223-AELY Manuel utilisateur

HIK VISION

HIK VISION DS-2CE12DF0T-FS Manuel utilisateur

HIK VISION

HIK VISION DS-2TD2637T-7/P Manuel utilisateur

HIK VISION

HIK VISION DS-2TD2466-50Y Manuel utilisateur

HIK VISION

HIK VISION ECI-B12F4 Manuel utilisateur

HIK VISION

HIK VISION DS-2CD7153 Manuel utilisateur

HIK VISION

HIK VISION DS-2CD1623G0-I Manuel utilisateur

HIK VISION

HIK VISION DS-TCG227-A Series Manuel utilisateur

HIK VISION

HIK VISION ECI-B64Z2 Manuel utilisateur

HIK VISION

HIK VISION DS-2TP21B-6AVFW Manuel utilisateur

HIK VISION

HIK VISION DS-2CD1023G0E-IF Manuel utilisateur

HIK VISION

HIK VISION TurboHD DS-2CE38D8T-PIR Manuel utilisateur

HIK VISION

HIK VISION TURBO HD DS-T116 Manuel utilisateur

HIK VISION

HIK VISION DS-2CE7 H0T-IT Series Manuel utilisateur

HIK VISION

HIK VISION DS-2CD8153F-EWI Manuel utilisateur

HIK VISION

HIK VISION TURBO HD DS-2CE56D1T-IRP Manuel utilisateur

HIK VISION

HIK VISION TurboHD H0T Series Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur

HIK VISION iDS-TCM403-A Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques