HIK VISION DS-MH6171I-A Manuel utilisateur

Network Portable IR Speed Dome

Quick Start Guide

Network Portable IR Speed Dome Quick Start Guide

Quick Start Guide

Any and all information, including, among others, wordings, pictures, graphs are the

properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries

(hereinafter referred to be “Hikvision”). This user manual (hereinafter referred to be

“the Manual”) cannot be reproduced, changed, translated, or distributed, partially or

wholly, by any means, without the prior written permission of Hikvision. Unless

otherwise stipulated, Hikvision does not make any warranties, guarantees or

representations, express or implied, regarding to the Manual.

About this Manual

This Manual is applicable to Network Portable IR Speed Dome.

The Manual includes instructions for using and managing the product. Pictures, charts,

images and all other information hereinafter are for description and explanation only.

The information contained in the Manual is subject to change, without notice, due to

firmware updates or other reasons. Please find the latest version in the company

website (http://overseas.hikvision.com/en/).

Please use this user manual under the guidance of professionals.

Trademarks Acknowledgement

and other Hikvision’s trademarks and logos are the properties of Hikvision

in various jurisdictions. Other trademarks and logos mentioned below are the properties

of their respective owners.

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED,

WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL

FAULTS AND ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY,

FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN

NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE

LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT

DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,

BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION

WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE

WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR

Network Portable IR Speed Dome Quick Start Guide

ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM

CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY

RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN

YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR

USE CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT

THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW,

THE LATER PREVAILS.

Network Portable IR Speed Dome Quick Start Guide

iii

Regulatory Information

FCC Information

FCC compliance: This equipment has been tested and found to comply with the limits

for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the

user will be required to correct the interference at his own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may

cause undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied accessories too are

marked with "CE" and comply therefore with the applicable

harmonized European standards listed under the Low Voltage

Directive 2014/35/EU, the EMC Directive 2014/30/EU, the RoHS

Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this symbol

cannot be disposed of as unsorted municipal waste in the European

Union. For proper recycling, return this product to your local supplier

upon the purchase of equivalent new equipment, or dispose of it at

designated collection points. For more information see:

www.recyclethis.info.

2006/66/EC (battery directive): This product contains a battery that

cannot be disposed of as unsorted municipal waste in the European

Union. See the product documentation for specific battery

information. The battery is marked with this symbol, which may

include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg).

For proper recycling, return the battery to your supplier or to a

designated collection point. For more information, see:

www.recyclethis.info.

Network Portable IR Speed Dome Quick Start Guide

Available Models

DS-MH6171I-A, DS-MH6171I-AS

Safety Instruction

These instructions are intended to ensure that user can use the product correctly to

avoid danger or property loss.

The precaution measure is divided into Warnings and Cautions:

Warnings: Neglecting any of the warnings may cause serious injury or death.

Cautions: Neglecting any of the cautions may cause injury or equipment damage.

Warnings

All the electronic operation should be strictly compliance with the electrical safety

regulations, fire prevention regulations and other related regulations in your local

region.

Please use the power adapter, which is provided by normal company. The power

consumption cannot be less than the required value.

Do not connect several devices to one power adapter as adapter overload may cause

over-heat or fire hazard.

Please make sure that the power has been disconnected before you wire, install or

dismantle the speed dome.

When the product is installed on wall or ceiling, the device shall be firmly fixed.

If smoke, odors or noise rise from the device, turn off the power at once and unplug

the power cable, and then please contact the service center.

If the product does not work properly, please contact your dealer or the nearest

service center. Never attempt to disassemble the speed dome yourself. (We shall not

assume any responsibility for problems caused by unauthorized repair or

maintenance.)

Please do not look directly into the laser light within 6 meters because laser is

hazardous to humans.

Cautions

Do not drop the dome or subject it to physical shock, and do not expose it to high

electromagnetism radiation. Avoid the equipment installation on vibrations surface or

places subject to shock (ignorance can cause equipment damage).

Warnings Follow

these safeguards to

prevent serious

injury or death.

Cautions Follow these

precautions to prevent

potential injury or

material damage.

Network Portable IR Speed Dome Quick Start Guide

Do not place the speed dome in extremely hot (refer to the specification of the device

for the detailed operating temperature), cold, dusty or damp locations, and do not

expose it to high electromagnetic radiation.

The dome cover for indoor use shall be kept from rain and moisture.

Exposing the equipment to direct sun light, low ventilation or heat source such as

heater or radiator is forbidden (ignorance can cause fire danger).

Do not aim the speed dome at the sun or extra bright places. A blooming or smear

may occur otherwise (which is not a malfunction however), and affecting the

endurance of sensor at the same time.

Please use the provided glove when open up the dome cover, avoid direct contact

with the dome cover, because the acidic sweat of the fingers may erode the surface

coating of the dome cover.

Please use a soft and dry cloth when clean inside and outside surfaces of the dome

cover, do not use alkaline detergents.

Please keep all wrappers after unpack them for future use. In case of any failure

occurred, you need to return the speed dome to the factory with the original wrapper.

Transportation without the original wrapper may result in damage on the speed dome

and lead to additional costs.

Improper use or replacement of the battery may result in hazard of explosion.

Replace with the same or equivalent type only. Dispose of used batteries according to

the instructions provided by the battery manufacturer.

Notes:

For the camera supports IR, you are required to pay attention to the following

precautions to prevent IR reflection:

Dust or grease on the dome cover will cause IR reflection. Please do not remove the

dome cover film until the installation is finished. If there is dust or grease on the

dome cover, clean the dome cover with clean soft cloth and isopropyl alcohol.

Make certain the installation location does not have reflective surfaces of objects too

close to the camera. The IR light from the camera may reflect back into the lens

causing reflection.

The foam ring around the lens must be seated flush against the inner surface of the

bubble to isolate the lens from the IR LEDS. Fasten the dome cover to camera body so

that the foam ring and the dome cover are attached seamlessly.

 
Network Portable IR Speed Dome Quick Start Guide 
 
vi 
Table of Contents 
Introduction .................................................................................................7 
1 Product Introduction ...........................................................................................7 
2 Key Feature .........................................................................................................7 
3 Appearance.........................................................................................................7 
4 Indicator Description ...........................................................................................9 
Installation ................................................................................................. 10 
1 SIM Card Installation..........................................................................................10 
2 SD Card Installation............................................................................................11 
3 Speed Dome Installation....................................................................................13 
3.1 Tripod Mounting .........................................................................................13 
3.2 Vehicle Roof Mounting ................................................................................14 
3.3 Wall Mounting ............................................................................................14 
3.4 Pendant Mounting ......................................................................................16 
3.5 Vertical Pole Mounting ................................................................................17 
Network Connection .................................................................................. 20 
1 Set Speed Dome over LAN .................................................................................20 
2 Set Speed Dome over WAN................................................................................21 
Activation................................................................................................... 22 
1 Activate via Web Browser ..................................................................................22 
2 Activate via SADP Software ................................................................................23 
Access via Web Browser ............................................................................. 25 
 

Network Portable IR Speed Dome Quick Start Guide

1Introduction

1.1 Product Introduction

Embedded with 4G, Wi-Fi, GPS module, LPR (License Plate Recognition) and face

capture algorithm, and deep learning algorithm, DS-MH6171I-A(S) network portable IR

speed dome (hereinafter referred to as speed dome) is widely used in temporary events

surveillance and license plate recognition for mobile scenes, e.g. parade, strike, outdoor

concert, law enforcement, and onboard monitoring, etc.

1.2 Key Feature

Video

1/2.8" progressive scan CMOS; 1920 × 1080/1280 × 720 resolution

H.265/H.264+/H.264 video compression

30× optical zoom, 16× digital zoom

HLC/BLC/3D DNR/Defog/EIS

Support up to 80 m IR distance

Storage

Dual built-in SD/SDXC card slot, up to 128 GB for each memory card

Communication Module

Support 4G module; 802.11b/g/n Wi-Fi; GPS positioning module; Bluetooth 4.0

Usability

Support quick installation with the magnetic base and the tripod bracket

Support Wi-Fi AP, which allows to connect the phone to the camera directly and

control the camera conveniently

Pluggable battery for continuous work, up to six hours

Replaceable battery for sustainable work

True 360°endless pan and -15°to 90°(auto-flip) tilt movement range for PTZ

Smart Function

Support LPR and blacklist

Face capture

1.3 Appearance

Refer to the figure and tables below for the appearance and description of the speed

dome.

Network Portable IR Speed Dome Quick Start Guide

Figure 1-1 Speed Dome Overview

Table 1-1 Overview Description

No.

Description

IR LED

Light sensor

Lens

ON/OFF switch

LED indicator

Speed dome handle

9-PIN aviation plug (connectable to 5 VDC power

Network Portable IR Speed Dome Quick Start Guide

No.

Description

output, RS-485 interface, and alarm in/out)

10-PIN aviation plug (connectable to 12 VDC

power input, serial port, and network interface)

GPS

Safety rope ring

Magnet

Battery

SD card slot

SIM card slot

1.4 Indicator Description

Refer to the following table for the description of the LED indicator.

Table 1-2 Indicator Description

Status

Description

Solid Red

Device is turning on/off.

OFF

Device is standby or is powered off.

Flashing Blue

The battery is being charged when device is standby

or powered off.

Solid Blue

The battery is fully charged when device is standby

or powered off.

Solid Green

The device is running normally.

Flashing Orange

(High Flashing Frequency)

The battery is being charged when device is running

normally.

Solid Orange

The battery is fully charged when device is running

normally.

Flashing Orange

(Low Flashing Frequency)

The device is not being charged and the battery

remaining capacity is less than 20%.

Flashing Red

(High Flashing Frequency)

The secondary battery is out of power. Change the

battery in time.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels HIK VISION Caméra de sécurité

HIK VISION

HIK VISION DS-2DE7A412MCG-EB Manuel utilisateur

HIK VISION

HIK VISION DS-2CD2443G0-IW Series Manuel utilisateur

HIK VISION

HIK VISION DS-2CD2063G0-I Manuel utilisateur

HIK VISION

HIK VISION DS-2TD2138-4/QY Manuel utilisateur

HIK VISION

HIK VISION DS-2DT6232X-AELY Manuel utilisateur

HIK VISION

HIK VISION DS-2XC6285G0-L Manuel utilisateur

HIK VISION

HIK VISION HiLook IPC-T250H Manuel utilisateur

HIK VISION

HIK VISION TURBO HD DS-2CE56D1T-IRP Manuel utilisateur

HIK VISION

HIK VISION DS-2PT3326IZ Manuel utilisateur

HIK VISION

HIK VISION DS-2CE11D0T-PIRL Manuel utilisateur

HIK VISION

HIK VISION UD05331N Manuel utilisateur

HIK VISION

HIK VISION DS-2XS6A25G0-I/CH20S40/K Mode d'emploi

HIK VISION

HIK VISION DS-TCL400-E Manuel utilisateur

HIK VISION

HIK VISION HiWatch HWI-D620H-Z Manuel utilisateur

HIK VISION

HIK VISION DS-2CD1T23G0-I Manuel utilisateur

HIK VISION

HIK VISION DS-2TD2137-4/P Manuel utilisateur

HIK VISION

HIK VISION UD02330B Manuel utilisateur

HIK VISION

HIK VISION DS-2CD2042WD-I Manuel utilisateur

HIK VISION

HIK VISION TurboHD H0T Series Manuel utilisateur

HIK VISION

HIK VISION DS-2CD2355FWD-I Manuel utilisateur

HIK VISION

HIK VISION DS-2CE56H1T-IT1E Manuel utilisateur

HIK VISION

HIK VISION HiLook THC-B129-LPS Manuel utilisateur

HIK VISION

HIK VISION DS-2DE5225IW-AE Manuel utilisateur

HIK VISION

HIK VISION DS-PDPC12P-EG2-WE Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur