HIK VISION DS-2CD2563G0-IS Manuel utilisateur

Dome Network Camera

Quick Start Guide

rights reserved.

About this Manual

The Manual includes instructions for using and managing the

Product. Pictures, charts, images and all other information

hereinafter are for description and explanation only. The information

contained in the Manual is subject to change, without notice, due to

rmware updates or other reasons. Please nd the latest version of

this Manual at the Hikvision website (http://www.hikvision.com/).

Please use this Manual with the guidance and assistance of

professionals trained in supporting the Product.

Trademarks Acknowledgment

and other Hikvision’s trademarks and logos are

the properties of Hikvision in various jurisdictions.

Other trademarks and logos mentioned are the properties of their

respective owners.

LEGAL DISCLAIMER

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,

THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS

HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED

“AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION

MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING

WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY

QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE

USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN

NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY

SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT

DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR

LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,

OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS

OF DOCUMENTATION, WHETHER BASED ON BREACH OF

CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT

LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE

OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET

PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION

SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL

OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES

RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS

INSPECTION, OR OTHER INTERNET SECURITY RISKS;

HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL

SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH

ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE

FOR ENSURING THAT YOUR USE CONFORMS TO THE

APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE,

FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT

INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING

WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL

PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER

PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR

ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT

OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION,

THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR

BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT

RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE

NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS

ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL

AND THE APPLICABLE LAW, THE LATER PREVAILS.

Regulatory Information

FCC Information

Please take attention that changes or modification not expressly ap-

proved by the party responsible for compliance could void the user’s

authority to operate the equipment.

FCC compliance: This equipment has been tested and found to com-

ply with the limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equip-

ment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help

FCC conditions

This device complies with part 15 of the FCC Rules. Operation is sub-

ject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied accessories

too are marked with "CE" and comply therefore withthe

applicable harmonized European standards listed under

the the EMC Directive 2014/30/EU, the RoHS Directive

2011/65/EU.

2012/19/EU (WEEE directive): Products marked with

this symbol cannot be disposed of as unsorted municipal

waste in the European Union. For proper recycling, return

this product to your local supplier upon the purchase of

equivalent new equipment, or dispose of it at designated

collection points. For more information see: www.

recyclethis.info

2006/66/EC and its amendment 2013/56/EU (battery

directive): This product contains a battery that cannot be

disposed of as unsorted municipal waste in the European

Union. See the product documentation for specic battery

information. The battery is marked with this symbol, which

may include lettering to indicate cadmium (Cd), lead (Pb),

or mercury (Hg). For proper recycling, return the battery to

your supplier or to a designated collection point. For more

information see: www.recyclethis.info.

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (B)/NMB-3(B) standards

requirements.

This device complies with Industry Canada licence-exempt RSS

standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference

that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada

applicables aux appareils radioexempts de licence. L'exploitation

est autorisée aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage

radioélectrique subi, même si le brouillage est susceptible d'en

compromettre le fonctionnement.

Under Industry Canada regulations, this radio transmitter may

only operate using an antenna of a type and maximum (or lesser)

gain approved for the transmitter by Industry Canada. To reduce

potential radio interference to other users, the antenna type and its

gain should be so chosen that the equivalent isotropically radiated

power (e.i.r.p.) is not more than that necessary for successful

communication.

Conformément à la réglementation d'Industrie Canada, le présent

émetteur radio peut

fonctionner avec une antenne d'un type et d'un gain maximal (ou

inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le

but de réduire les risques de brouillage radioélectrique à l'intention

des autres utilisateurs, il faut choisir le type d'antenne et son gain

de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.)

ne dépasse pas l'intensité nécessaire à l'établissement d'une

communication satisfaisante.

This equipment should be installed and operated with a minimum

distance 20 cm between the radiator and your body.

Cet équipement doit être installé et utilisé à une distance minimale

de 20 cm entre le radiateur et votre corps.

Cautions&Warnings

These instructions are intended to ensure that the user can

use the product correctly to avoid danger or property loss.

Laws and Regulations

The device should be used in compliance with local laws,

electrical safety regulations, and re prevention regulations.

Transportation

Keep the device in original or similar packaging while

transporting it.

Power Supply

The power source should meet limited power source or

PS2 requirements according to IEC 60950-1 or IEC 62368-

1 standard.

DO NOT connect multiple devices to one power adapter, to

avoid over-heating or re hazards caused by overload.

Make sure the plug is properly connected to the power

socket.

System Security

The installer and user are responsible for password and

security conguration.

Battery

This equipment is not suitable for use in locations where

children are likely to be present.

CAUTION: Risk of explosion if the battery is replaced by an

incorrect type. Dispose of used batteries according to the

instructions

ATTENTION: IL Y A RISQUE D'EXPLOSION SI LA

BATTERIE EST REMPLACÉE PAR UNE BATTERIE DE

TYPE INCORRECT. METTRE AU REBUT LES BATTERIES

USAGÉES CONFORMÉMENT AUX INSTRUCTIONS

Improper replacement of the battery with an incorrect type

may defeat a safeguard (for example, in the case of some

lithium battery types).

Do not dispose of the battery into fire or a hot oven, or

mechanically crush or cut the battery, which may result in

an explosion.

Do not leave the battery in an extremely high temperature

surrounding environment, which may result in an explosion

or the leakage of ammable liquid or gas.

Do not subject the battery to extremely low air pressure,

which may result in an explosion or the leakage of

ammable liquid or gas.

Maintenance

If the product does not work properly, please contact your

dealer or the nearest service center. We shall not assume

any responsibility for problems caused by unauthorized

repair or maintenance.

A few device components (e.g., electrolytic capacitor)

require regular replacement. The average lifespan varies,

so periodic checking is recommended. Contact your dealer

for details.

Cleaning

Please use a soft and dry cloth when clean inside and

outside surfaces of the product cover. Do not use alkaline

detergents.

Using Environment

When any laser equipment is in use, make sure that the

device lens is not exposed to the laser beam, or it may burn

out.

DO NOT expose the device to high electromagnetic

radiation or dusty environments.

For indoor-only device, place it in a dry and well-ventilated

environment.

DO NOT aim the lens at the sun or any other bright light.

Make sure the running environment meets the requirement

of the device. The operating temperature shall be -30 °C to

60 °C (-22 °F to 140 °F), and the operating humidity shall

be 95% or less (no condensing).

DO NOT place the device in extremely hot, cold,

dusty or damp locations, and do not expose it to high

electromagnetic radiation.

White Light Illuminator (If supported)

Possibly hazardous optical radiation emitted from this

product.

DO NOT stare at operating light source. May be harmful to

the eyes.

Wear appropriate eye protection or DO NOT turn on the

white light when you assemble, install or maintain the

camera.

Emergency

If smoke, odor, or noise arises from the device, immediately

turn off the power, unplug the power cable, and contact the

service center.

Time Synchronization

Set up device time manually for the rst time access if the

local time is not synchronized with that of the network. Visit

the device via Web browse/client software and go to time

settings interface.

Installation

This camera series shares a similar structure. We take one

type among this series for demonstration.

Make sure the device is rmly secured to any wall or ceiling

mountings.

Be sure that there is enough space to install the device and

accessories.

Make sure that the device in the package is in good

condition and all the assembly parts are included.

Make sure that the wall is strong enough to withstand at

least 4 times the weight of the device and the mount.

The standard power supply is 12 VDC or PoE, please make

sure your power supply matches with your device.

Make sure that the power has been disconnected before

you wire, install, or disassemble the device.

Make sure that no reective surface is too close to the

device lens. The IR light from the device may reect back

into the lens causing reection.

CAUTION: Hot parts! Burned ngers when

handling the parts. Wait one-half hour after

switching off before handling parts. This

sticker is to indicate that the marked item can be hot and

should not be touched without taking care. For device with

this sticker, this device is intended for installation in a

restricted access location, access can only be gained by

service persons or by users who have been instructed

about the reasons for the restrictions applied to the location

and about any precautions that shall be taken.

Symbols and Marks

Notice

Warning

Forbidden

Correct

Incorrect

Turn to page A and continue.

i. Not necessarily included accessory.

ii. Variable accessory amount.

iii. Skip this step if not required.

MicroSD card

Grounding

Disposal

Purchase separately

Other situations

Other situations omitted

Waterproof

Skip this step if not necessary

The standard power supply is 12 VDC or PoE, please make

sure your power supply matches with your device.

Make sure that the power has been disconnected before

you wire, install, or disassemble the device.

Make sure that no reective surface is too close to the

device lens. The IR light from the device may reect back

into the lens causing reection.

CAUTION: Hot parts! Burned ngers when

handling the parts. Wait one-half hour after

switching off before handling parts. This

sticker is to indicate that the marked item can be hot and

should not be touched without taking care. For device with

this sticker, this device is intended for installation in a

restricted access location, access can only be gained by

service persons or by users who have been instructed

about the reasons for the restrictions applied to the location

and about any precautions that shall be taken.

Symbols and Marks

Notice

Warning

Forbidden

Correct

Incorrect

Turn to page A and continue.

i. Not necessarily included accessory.

ii. Variable accessory amount.

iii. Skip this step if not required.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels HIK VISION Caméra de sécurité

HIK VISION

HIK VISION TURBO HD H0T Series Manuel utilisateur

HIK VISION

HIK VISION DS-2XS2T47G0-LD/4G/C14S40 Manuel utilisateur

HIK VISION

HIK VISION DS-2CD886BF-E Manuel utilisateur

HIK VISION

HIK VISION iDS-2CD9396-BIS Manuel utilisateur

HIK VISION

HIK VISION DS-2CZ2114P Manuel utilisateur

HIK VISION

HIK VISION DS-2TD4136T-9 Manuel utilisateur

HIK VISION

HIK VISION DS-2CD1043G0E-I Manuel utilisateur

HIK VISION

HIK VISION DS-2TD2137-7P Manuel utilisateur

HIK VISION

HIK VISION DS-2CC11D3S-IR Manuel utilisateur

HIK VISION

HIK VISION DS-2CD876BF Manuel utilisateur

HIK VISION

HIK VISION DS-2CD2443G0-I Manuel utilisateur

HIK VISION

HIK VISION 4 Inch High Speed Dome Manuel utilisateur

HIK VISION

HIK VISION 62 Series Manuel utilisateur

HIK VISION

HIK VISION DS-2CD883F-EW series Manuel utilisateur

HIK VISION

HIK VISION DS-2CE16C0T-IT1 Manuel utilisateur

HIK VISION

HIK VISION AE-VC224T-IT Manuel utilisateur

HIK VISION

HIK VISION TURBO HD U7T Series Manuel utilisateur

HIK VISION

HIK VISION DS-2CE16H0T-ITE Manuel utilisateur

HIK VISION

HIK VISION HWT-T250-M Manuel utilisateur

HIK VISION

HIK VISION DS-2CE10DFT-FC Manuel utilisateur

HIK VISION

HIK VISION DS-2CV2G21G0-IDW Manuel utilisateur

HIK VISION

HIK VISION DS-2XT6645G0-LIZS/C15 Manuel utilisateur

HIK VISION

HIK VISION DS-2CE12KF0T-FS Manuel utilisateur

HIK VISION

HIK VISION DS-2CE11D0T-PIRLP Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur