HIK VISION ColorVu Manuel utilisateur

Configuration Guide of ColorVu

Camera LED Supplement Light

1 Brightness configuration of LED supplement light

Note:

1, When the camera is electrified, it is self-check at full power, and the supplement light is bright,

so avoid to stare at supplement light of camera;

2, LED supplement light will be locked in the light-on state for an hour after continuous switching

for 5 times in a short time due to manual test or ambient brightness change.

Path：【 Configuration】-【System】-【System Settings】-【External Device】

1.1 Enable supplement light

1.2 LED light brightness adjustment

LED light brightness can be set to Manual mode or Auto mode.

1.2.1 Manual mode

1. Select Manual mode in LED Light Brightness Adjustment;

2. Adjust LED light Brightness during level 1-100, 0 means no brightness;

3. Startup default is level 15 (sample model is 50, order model is 15)

1.2.2 Auto mode

1. Select LED Light Brightness Adjustment mode with Auto, camera will detect ambient brightness

automatically, adjusting the brightness of supplement light.

2. The level of LED light brightness can limit the maximum brightness of supplement light.

2 Mode configuration of LED Light On

Mode of LED Light On can be set to Timing or Auto.

2.1 Timing mode

1. Selecting Timing in LED Light On, camera will turn on/off the LED supplement light according to

Start/End Time;

2. Setting schedule time according to application requirements. Start time should be earlier than

End Time. Start Time can be on the previous day of End Time.

2.2 Auto mode

1. Camera will detect ambient brightness automatically with Auto mode, and turn on LED light

automatically. The mechanism is similar to the automatic adjustment of infrared supplement

lamplight;

2. Setting filtering time in the range of 0-120s;

When the ambient brightness exceeds the light limit and lasts for a period of time (as shown in the

picture below: 5 seconds), the camera begins to turn the light on and off. This setting prevents the

camera from continuing to turn on and off lights when the brightness changes rapidly;

3. Setting sensitivity in the range of 0-7;

The lower the sensitivity, the greater changing in ambient brightness is required before the camera

can turn on and off the light;

The higher the sensitivity, the lower the requirement of ambient brightness change;

4. Currently, the default mode is Auto. Adjusting the parameters or customizing the firmware if

need to turn off the light by default.

Table des matières

Autres manuels HIK VISION Caméra de sécurité

HIK VISION

HIK VISION D8T Series Manuel utilisateur

HIK VISION

HIK VISION iDS-TCD403-BI Manuel utilisateur

HIK VISION

HIK VISION TURBO HD DS-2CE56D1T-IRP Manuel utilisateur

HIK VISION

HIK VISION TURBO HD D3T Series Manuel utilisateur

HIK VISION

HIK VISION DS-2XS6A47G1-LS/C36S80 Manuel utilisateur

HIK VISION

HIK VISION IPC-B220-IZ Manuel utilisateur

HIK VISION

HIK VISION TURBO HD D8T PIR Series Manuel utilisateur

HIK VISION

HIK VISION DS-2DF1-401E Manuel utilisateur

HIK VISION

HIK VISION DS-2SE4C425MWG-E/26(F0) Manuel utilisateur

HIK VISION

HIK VISION DS-2CE16D(F)7T-AIT3Z Manuel utilisateur

HIK VISION

HIK VISION DS-2CD2142FWD-IWS Manuel utilisateur

HIK VISION

HIK VISION DS-2CD3D26G2T-IZHSY Manuel utilisateur

HIK VISION

HIK VISION HOT Series Manuel utilisateur

HIK VISION

HIK VISION DS-2CD7255F-EIZHS Manuel utilisateur

HIK VISION

HIK VISION DS-2CE16C5T-AVFIR3 TURBO HD Manuel utilisateur

HIK VISION

HIK VISION DS-2CD6D54G1-ZS/RC Manuel utilisateur

HIK VISION

HIK VISION DS-2CC51A7P-VF Manuel utilisateur

HIK VISION

HIK VISION DS-2CE12UF3T-E Manuel utilisateur

HIK VISION

HIK VISION DS-2CD6984G0-IH Manuel utilisateur

HIK VISION

HIK VISION DS-2CD7153 Manuel utilisateur

HIK VISION

HIK VISION iDS-2CD8426G0-F-I Manuel utilisateur

HIK VISION

HIK VISION DS-2DF8836IV-AEL Manuel utilisateur

HIK VISION

HIK VISION DS-2DE5232W-AE3 Manuel utilisateur

HIK VISION

HIK VISION PanoVu PT Series Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur