HIK VISION DS-K5603-Z Manuel utilisateur

(Simplified) Simplified Edition-Face Recognition Swing Barrier Installation Guide_V1.1-20190215.docx

Hikvision Product Support Team

Face Recognition Swing Barrier

Installation Guide

(Simplified Edition)

Date

Content

Person

20180908

Create

Nero

20190215

Translate and Modify

Morgen

(Simplified) Simplified Edition-Face Recognition Swing Barrier Installation Guide_V1.1-20190215.docx

Hikvision Product Support Team

Content

Face Recognition Swing Barrier..................................................................................................................................................... 1

1. Wiring.............................................................................................................................................................................. 3

2. Swing barrier study mode........................................................................................................................................ 5

3. Software configuration.............................................................................................................................................. 6

4. Testing ............................................................................................................................................................................ 8

(Simplified) Simplified Edition-Face Recognition Swing Barrier Installation Guide_V1.1-20190215.docx

Hikvision Product Support Team

1. Wiring

1）Power cable wiring: connect cable to air switch(L, N and GND)；

NOTE：Power OFF before wiring to ensure safety.

2）Connect interconnecting cable between left and right barriers.

(Simplified) Simplified Edition-Face Recognition Swing Barrier Installation Guide_V1.1-20190215.docx

Hikvision Product Support Team

3）Connect DS-K5603-Z to swing barrier.

a. Connect power cable. There is a connecter inside barrier to provide power for face

module(DS-K5603-Z)

b. Connect face module RS232 cable to reserved interface(Black connecter)

White\Green—Black White\Orange—Blue Orange—Yellow

From face device

From barrier 12V power

supply

(Simplified) Simplified Edition-Face Recognition Swing Barrier Installation Guide_V1.1-20190215.docx

Hikvision Product Support Team

c. Connect swing barrier and face module to network switch.

There is no need to care about the sequence, it’s a normal switch, so that we can manage face module and

swing barrier in software at same time, to ensure same data in two devices.

2. Swing barrier study mode

1) Power off the device and adjust two swings on a line.

2) Set DIP switch as 10000000, and power on the device

From face

module

From barrier

Connect to PC

(Simplified) Simplified Edition-Face Recognition Swing Barrier Installation Guide_V1.1-20190215.docx

Hikvision Product Support Team

3) After study mode finish(swing stopped moving), power off the device, adjust DIP switch as 00000000,

power on device again. Device will open and close one time automatically.

3. Software configuration

(Simplified) Simplified Edition-Face Recognition Swing Barrier Installation Guide_V1.1-20190215.docx

Hikvision Product Support Team

1) .Add device（activate in advance）

2) Select K3M200 and enter Remote Configuration, enter page as below and select RS-485

Select 4 from drop-down list and set as front left picture, then select 6 from drop-down list and set other

parameters same as front right picture.

3) Add person from software, include card and face, don’t forget to link face picture to card.

Swing barrier control board K3M200

Face Recognition module：K5603-Z

(Simplified) Simplified Edition-Face Recognition Swing Barrier Installation Guide_V1.1-20190215.docx

Hikvision Product Support Team

4) Synchronize person data to swing barrier and face recognition module

4. Testing

Verify card on card reader，barrier will open, after pass the barrier will close.

Verify face on DS-K5603(T)-Z，barrier will open, after pass the barrier will close.

Autres manuels pour DS-K5603-Z

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels HIK VISION Contrôleurs d'accès IP

HIK VISION

HIK VISION DS-K2601 Instructions d'utilisation et d'entretien

HIK VISION

HIK VISION DS-K1T605 Series Manuel utilisateur

HIK VISION

HIK VISION DS-K2600 Series Manuel utilisateur

HIK VISION

HIK VISION DS-K1A802 Series Manuel utilisateur

HIK VISION

HIK VISION DS-K1T673-T Series Manuel utilisateur

HIK VISION

HIK VISION DS-K1T500S Manuel utilisateur

HIK VISION

HIK VISION DS-K1T804B Series Manuel utilisateur

HIK VISION

HIK VISION DS-K1T681 Series Manuel utilisateur

HIK VISION

HIK VISION DS-K1801 Series Manuel utilisateur

HIK VISION

HIK VISION DS-K1TA70MI-T Manuel utilisateur

HIK VISION

HIK VISION DS-K281 Series Manuel utilisateur

HIK VISION

HIK VISION DS-K1T105 Series Manuel utilisateur

HIK VISION

HIK VISION DS-K2600 Series Manuel utilisateur

HIK VISION

HIK VISION K1T804AEF Manuel utilisateur

HIK VISION

HIK VISION DS-K4E100 Manuel utilisateur

HIK VISION

HIK VISION DS-K2800 Series Manuel utilisateur

HIK VISION

HIK VISION DS-K1T802 Manuel utilisateur

HIK VISION

HIK VISION DS-K1F600-D6E Series Manuel utilisateur

HIK VISION

HIK VISION DS-TMT201-D Manuel utilisateur

HIK VISION

HIK VISION DS-K3M200 Manuel utilisateur

HIK VISION

HIK VISION DS-K2600 Series Manuel utilisateur

HIK VISION

HIK VISION DS-K281X Series Manuel utilisateur

HIK VISION

HIK VISION DS-K2801 Manuel utilisateur

HIK VISION

HIK VISION DS-K5603-Z Manuel utilisateur

Manuels Contrôleurs d'accès IP populaires d'autres marques

ZKTeco

ZKTeco SpeedFace-V5L Manuel utilisateur

Jantar

Jantar REX A-1-9 Manuel utilisateur

2N Access Unit Feuille d'instructions

Kedacom

Kedacom KSCA120 Series Manuel utilisateur

H3C

H3C WX2880X Manuel utilisateur

G4S

G4S S870-EX Mode d’emploi

PRASTEL

PRASTEL M2000PE Manuel utilisateur

Allegion

Allegion interflex IF-281 Cylinder Manuel utilisateur

TECOM

TECOM TS1067E Manuel utilisateur

Fermax

Fermax Memokey 100C Guide de l'utilisateur

Fermax

Fermax CITYLINE MEMOKEY Mode d’emploi

Software House

Software House iSTAR Pro 2U RM Mode d’emploi

AKCP

AKCP SP+ Manuel utilisateur

Bpt

Bpt HNA/102 Manuel utilisateur

Civintec

Civintec CV9601T-T-1F Manuel utilisateur

BioMax

BioMax N-X90W Manuel utilisateur

ZKTeco

ZKTeco OP-200 Manuel utilisateur

FingerTec

FingerTec s-Kadex Manuel utilisateur