Hidrotermal PF-009 Manuel utilisateur
PVC SPA Skimmer
PF-009
USER MANUAL
1. Skimmer Parameters
Model Description
PF-009 PVC SPA Skimmer
2. Function
Skimmers are used to eliminate the dirtiness suspended on the surface of the pool. For this reason, when
building the pool, it is recommended to install the skimmers so that their mouths facing the prevailing winds.
3. Installtion
First, When intall the skimmer faceplate you must be absolutely certain that each screw is compression tight.
Compression tight means tight enough that the flange squishes together hard enough that no water can leak
by. If any of the screws in your skimmer faceplate will not tighten all the way or are spinning in holes then
you will need to repair this is order to prevent a leak in this location.
In addition, make sure skimmer connection ports on the bottom connect to pool plumbing lines. These
connections are about as tricky as they come in terms of pool plumbing connections as you will mostly be
doing it blind and the height of the skimmer must be perfect to line up with the correct orientation on the pool
wall. The skimmer is what sets the water level of your pool so having it sit too high or too low is a problem.
4. Warning
The skimmer should be installed by a specialist technician.
Do not place chlorine or bromide tablets in the skimmer basket.
It is recommended to use products specifically designed to work with PVC.
Figure 1
Table des matières
Autres manuels Hidrotermal Filtre de piscine
Manuels Filtre de piscine populaires d'autres marques
Davey
Davey EcoPure DEP2140 Manuel utilisateur
JUWEL Aquarium
JUWEL Aquarium EccoSkim Manuel utilisateur
POLYGROUP LIMITED
POLYGROUP LIMITED SFS600 Filter System with F600C Pump Manuel utilisateur
Pentair Pool Products
Pentair Pool Products Filter CFW Series Manuel utilisateur
Oase
Oase Skimmer 250 Manuel utilisateur
Oase
Oase CrystalSkim 350 Manuel utilisateur