HiBoost F27 Manuel utilisateur

BOOST CELL PHONE SIGNAL BOOSTERS

MADE BY HUAPTEC

Table of contents

How it works

Package contents

Features

Booster’s port description

LCD Introduction

Control Button Operations

Manual Gain Control (MGC)

Install HiBoost Booster System

Trouble Shooting

Specications

Product Warranty

FCC RF Exposure Statement

IC RF Exposure Statement

Warnings

Before you install

Installation overview

1. Install Outdoor Antenna

2. Install Indoor Antenna

3. Install the signal booster

4. Booster Commissioning

https://www.signalbooster.com/ | 1-855-846-2654 | [email protected]

How it works

Package contents

F27-5S is designed to help mobile users amplify weak signals of 2G, 3G and 4G.

They are bi-directional ampliers.

The donor antenna receives the signals from the cell tower, amplies it, and

transmits to the signal booster. Then the indoor antenna will receive the signal

and retransmit it to your mobile device.

The signals produced by your cell phone are also amplied by indoor antenna

via the booster and donor antenna (exterior antenna).

Outdoor and indoor antennas and cables are required for installation

(purchased separately).

F27-5S Industrial boosters cannot transmit signals without an outside and inside

antenna connected by a cable. F27-5S can install up to 15 indoor antennas.

However, we recommend installing up to 8 to 10 indoor antennas. The number

of antennas, length of cables or other accessories needed can vary according to

the size and make of the structure, exterior lack of signal strength, or where the

structure exists. Or you can contact us to nd out what you need.

1 Hiboost Industrial Booster

2 Adapter

3 Plastic Expansion bolt

4 Tapping Screw

5 User Manual

https://www.signalbooster.com/ | 1-855-846-2654 | [email protected]

Multiple antenna installation Sample

Optional antenna kits Recommended

1. Outdoor Antenna 2. Booster 3. Indoor Panel Antenna

6. Omni ceiling antenna

RF cables (wide band) Yagi/ LPDA Antenna Panel Antenna

Dome Antenna Panel Antenna Omni Ceiling Antenna

Whip Antenna Lightning Protector Coupler

4. Coupler 5. Splitter

https://www.signalbooster.com/ | 1-855-846-2654 | [email protected]

Cavity Splitter (2,3,4 way) Wilkinson Splitter (2, 3, 4 way)

Features

Booster’s port description

Embedded CPU, self-adaptive intelligent system to make booster system very

easy to install and better performance is guaranteed under complex and

constantly charging RF environment.

ISO: Intelligent isolation processing to avoid self-oscillation, quite wide adjusting

range to stabilize the signal strength/ quality for clearer voice/ higher data speed

and avoid interference to mobile network.

ALC: Intelligent ALC, quite wide adjusting range to improve the signal quality

for clearer voice and higher data speed.

LCD Display: Displays ISO status, ALC status, actual gain and downlink output

power that makes booster installation and troubleshooting much easier.

MGC: Control buttons to adjust the gain for both uplink and downlink

independently, 31 dB range.

Excellent RF performance, larger coverage area, clearer voice and higher

speed data services.

Elegant design, low power consumption to save cost during operation and

low heat dissipation.

The following image shows the key components of the booster. There are 4 parts:

rst part is LCD indicator, which will show the booster status. Second part is LED

indicators. Third part is control buttons. The forth part is connectors to the outdoor

antenna and indoor antenna. The following and graphs show the details.

https://www.signalbooster.com/ | 1-855-846-2654 | [email protected]

1. LCD

5. Indoor antenna port 6. Power connector

2. Control Button 3. LED indicators 4. Outdoor antenna port

LCD Introduce

After the booster is on, gain and power will light up on the screen.

"Band" - Displays the working frequency. Find below the list of frequencies

displayed corresponding to the networks.

"ULdB" & "DLdB" - Gain indication.

The displayed value shows real-time uplink and downlink gain.

https://www.signalbooster.com/ | 1-855-846-2654 | [email protected]

"Power dBm" - Power indication.

The displayed value shows real-time power. When booster's output power is

lower than -10dBm, the value will display “---“.

"ISO" - Isolation alarm indication.

When the booster doesn't have enough isolation between the outdoor and

indoor antennas, the "ISO" is ashing. Press "Query" key and LCD screen will

display "ISO" under the current band.

"ALC" - Strong receiving signal alarm indication.

When the booster is receiving to strong signal from outside, output power gets

overrated and "ALC" starts ashing. Press "Query" key and LCD screen will

display "ALC" under the current band.

"OFF" - Booster shut-o alarm indication.

When LCD screen is in "OFF" state and the booster shuts o, LCD screen will be ashing.

When LCD screen is "ON" and the booster shuts o, the "OFF" is ashing.

Press "Query" key and LCD screen will display "OFF" under the current band.

https://www.signalbooster.com/ | 1-855-846-2654 | [email protected]

Control Button operation

Manual gain control (MGC)

There are 4 operation modes: Long press on "Query"

key, short press on "Query" key, short press on "UP"

and short press on "DOWN" key.

When LCD is in the alarm display mode, press "Query" key and LCD screen will

display alarm indication under the current band. Press "UP" (or "DOWN") key, LCD

will switch to help tips. If you don't operate LCD key within 30 seconds, LCD will

return to the xed display mode.

If you don't operate LCD key within 5 minutes, LCD screen will go to the "OFF"

state. Press any key and LCD will go back to the xed display mode.

Since the booster has intelligent software system, MGC attenuation is not

needed, except for the cases when you don't feel comfortable about ISO or ALC

ashing, or in some extreme cases you might need to attenuate gain value.

When LCD is in the xed display mode, press "Query" key for 3 seconds. It will

start up the Setting Mode and make the screen stay in the current status.

When LCD is in the xed display mode, press

"Query" key for 3s and it will start up Setting Mode.

Press "Query" key shortly, LCD will switch to the

next value (uplink or downlink gain for a

dierent band).

Press "Query" key for 3s, LCD will return to the

xed display mode (For more details refer to

"Manual gain control - MGC)."

Press "UP" (or "Down") key, the value of the current

item will change to the higher (or lower) one.

Press "Query" key shortly, LCD will switch to the next value (uplink or downlink

gain for a dierent band).

Press "UP" key once shortly, the gain will increase by 1 dB, press "DOWN" once

shortly, the gain will be reduced by 1dB.

Press "Query" key for 3 seconds, LCD will return to the xed display mode.

https://www.signalbooster.com/ | 1-855-846-2654 | [email protected]

Install Hiboost Booster system

with or to be 5dB less than downlink gain, uplink gain shouldn't be more than

downlink gain in order to avoid interference with mobile network.

Before you install

Installation overview

Make sure you have sucient cable length between proposed outdoor/indoor

antennas and the booster in case you don't purchase standard kits.

Make sure the position where you install the booster is near to one existing

electrical outlet, well ventilated, away from excessive heat, moisture, and

direct sunlight.

Install tools and accessories:

The booster has LCD display and intelligent self adaptive system, LCD displays

real time working state, and intelligent self-adaptive system can automatically

calculate and adjust the booster to obtain its best performance, so it is very

easy to install for user.

Step 1. Install your outdoor antenna on the roof where there is the strongest

signal.

Step 2. Install your indoor antenna where you want to improve the signal.

Step 3. Mount your signal booster, connect the cables to the signal booster from

outdoor antenna and indoor antenna at the designated ports, and connect

the booster to the AC supply (make sure all the cables are connected.)

General installation steps:

1. Outdoor Antenna 2. Booster 3. Indoor Antenna 4. Power Supply

https://www.signalbooster.com/ | 1-855-846-2654 | [email protected]

1. Install Outdoor Antenna

1.1 How to nd the place with the strongest receiving signal.

The booster's main function is to improve weak RF signal inside a house, oce or

any other indoor area. The receiving strength of outdoor antenna and the strength

of the signal reception outdoors directly aect the eciency of indoor coverage.

That is why it is crucially important to install outdoor antenna at the point where

signal reception is the strongest.

There are two methods to nd the strongest receiving signal. One is to use

booster's LCD display, the other is to use mobile phone to test signal bars. We

would highly recommend you to use LCD display as this method is more accurate.

LCD Display Method.

Connect the outdoor antenna to the booster's outdoor port with an original

coaxial cable that comes in a kit and power on the booster. Fix the outdoor

antenna outside the window or on the top of the building and point it to the

nearest cell tower. Then have a look at gain and output power value displayed

on LCD.

Outdoor antenna receives the strongest signal when the booster's output

power reaches its full value. The place where you can reach it is the best to

mount outdoor antenna.

The booster's LCD display shows the gain and output power. Output power can

be checked below "Power dBm" on LCD display.

Remark: when ALC shows up ashing, it means the receiving signal power is

stronger than the system needs it. It is recommended to adjust outdoor antenna

position until ALC alarm disappears. Or you can leave it as it is to let the booster

self-adjust automatically. However when ALC ashes, and the displayed gain is

more than 30 dB less than rated gain value, try to adjust outdoor antenna to

decrease the receiving power.

10 https://www.signalbooster.com/ | 1-855-846-2654 | [email protected]

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels HiBoost Extenseur

HiBoost

HiBoost F20GI-5S-IoT Manuel utilisateur

HiBoost

HiBoost Smart Link F15G-5S-BTW Manuel utilisateur

HiBoost

HiBoost Mate Plus Series Manuel utilisateur

HiBoost

HiBoost F27-5S Manuel utilisateur

HiBoost

HiBoost F12G-3S-BTW Manuel utilisateur

HiBoost

HiBoost Hi13- 3S Manuel utilisateur

HiBoost

HiBoost Hi20-EW Manuel utilisateur

HiBoost

HiBoost Mini F08GI-5S-BTW Manuel utilisateur

HiBoost

HiBoost C27G-5S-BTW Manuel utilisateur

HiBoost

HiBoost Easy Vehicle 2S C27G-CP Manuel utilisateur

HiBoost

HiBoost Mate Plus Series Manuel utilisateur

HiBoost

HiBoost Plus Series Manuel utilisateur

HiBoost

HiBoost F27K-6S-IoT Manuel utilisateur

HiBoost

HiBoost Mini Series Manuel utilisateur

HiBoost

HiBoost Mate Plus Series Manuel utilisateur

HiBoost

HiBoost SLD+ Manuel utilisateur

HiBoost

HiBoost Travel 4G 2.0 RV Manuel utilisateur

HiBoost

HiBoost Home 4K Manuel utilisateur

HiBoost

HiBoost Mini Manuel utilisateur

HiBoost

HiBoost Commercial 30K Pro Manuel utilisateur

HiBoost

HiBoost Smartlink Series Manuel utilisateur

HiBoost

HiBoost 4K Smart Link Manuel utilisateur

HiBoost

HiBoost F20G-5S-LCD Manuel utilisateur

HiBoost

HiBoost 4K Plus Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur