Heatmiser Wireless Series Manuel utilisateur

Model: Slimline-RF V3

Wireless Series

Model: Slimline-RF V3 2

Table of Contents

Product Image

Table of Contents

What is a Programmable

Room Thermostat?

Installation Procedure

Installing the Batteries

Replacing the Batteries

Receiver Type

Pairing Menu Explained

Pairing Menu

Pairing with the UH8-RF V2 Wiring Centre

Pairing With the UH8-RF Wiring Centre

Pairing With the RF-Switch V2

Pairing With the RF-Switch

Pairing With the RF-Switch 16 Amp

LCD Display

Setting the Clock

Temperature Display

Comfort Levels Explained

Setting the Hot Water

Switching Times

Locking the Thermostat

Temperature Control

Temperature Hold

Holiday

Hot Water Override

Frost Mode

Heating On/Oﬀ

Factory Reset

Re-calibrating the Thermostat

Optional Features Explained

Adjusting the Optional Settings

Optional Settings - Feature Table

4-5

6-7

9-10

17-18

21-22

31-32

What is a Programmable Room Thermostat?

A programmable room thermostat is both a programmer and a room thermostat.

The programmer allows you to set “On” and “Setback” periods to suit your own lifestyle.

The room thermostat works by sensing the air temperature, switching on the heating

when the air temperature falls below the thermostat setting, and switching it oﬀ once

this set temperature has been reached.

So a programmable room thermostat lets you choose what times you want the heating

to be on, and what temperature it should reach while it is on. It will allow you to select

diﬀerent temperatures in your home at diﬀerent times of the day (and days of the week)

to meet your particular needs and preferences.

Setting a room thermostat to a higher temperature will not make the room heat up

any faster. How quickly the room heats up depends on the design & size of the heating

system.

Similarly reducing the temperature setting does not aﬀect how quickly the room cools

down. Setting a programmable room thermostat to a lower temperature will result in the

room being controlled at a lower temperature, and saves energy.

The way to set and use your programmable room thermostat is to ﬁnd the lowest

temperature settings that you are comfortable with at the diﬀerent times you have

chosen, and then leave it alone to do its job.

Wireless Series

Model: Slimline-RF V3

Room thermostats need a free ﬂow of air to sense the temperature, so they must not be

covered by curtains or blocked by furniture. Nearby electric ﬁres, televisions, wall or

table lamps may also prevent the thermostat from working properly.

Installation Procedure

This wireless thermostat is designed to be surface mounted.

Step 1

Carefully separate the front half of the thermostat from the back plate by placing a

small ﬂat head terminal driver into the slots on the bottom face of the thermostat.

Step 2

Mark 2 hole positions on the wall using the backplate as a positioning template.

Drill at the marked positions and insert a wall plug into each hole.

Step 3

Screw the thermostat back plate securely on the wall.

Step 4

Clip the front of the thermostat back onto the thermostat back plate.

Mount the thermostat at eye level.

Read the instructions fully so you get the best from our product.

Don’t

Do not install near to a direct heat source as this will aﬀect functionality.

Do not push hard on the LCD screen as this may cause irreparable damage.

5Wireless Series

Model: Slimline-RF V3

Installing the Batteries

2x AAA batteries have been supplied with this thermostat.

To access the battery holder, push and release the compartment door located

on the bottom face of the thermostat. The thermostat will inform you when the

batteries need to be replaced by displaying the battery icon on screen.

Do NOT use rechargeable batteries with this product!

7Wireless Series

Insert the batteries in the empty battery holder, ensuring that each battery is

orientated for the correct polarity + / - .

Push the battery holder back inside the thermostat until it is secured

in its closed position.

Model: Slimline-RF V3

Batteries have a ﬁxed lifespan and will need to be replaced occasionally to

ensure the thermostat operates correctly.

The thermostat will inform you when the batteries need to be replaced by

displaying the battery icon on screen.

Note: You must replace the batteries within 1 minute of removal in order to retain

the current clock and comfort level settings.

Replacing the Batteries

Battery Icon

(Flashes)

9Wireless Series

Receiver Type

Slimline-RF V3 will send a wireless signal to a receiver to switch on the heating

or hot water. Select the receiver type you are using from the list shown here

on pages 9 & 10, and follow the pairing instructions on the relevant page.

UH8-RF V2

Page 12

To control heating only, conﬁgure feature 10 on the Slimline-RF to mode 00 or 01.

To control heating & hot water, conﬁgure feature 10 to mode 02, (see page 34).

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Heatmiser Thermostat

Heatmiser

Heatmiser Slimline Series Manuel utilisateur

Heatmiser

Heatmiser PRT-W Manuel utilisateur

Heatmiser

Heatmiser Touch Manuel utilisateur

Heatmiser

Heatmiser UH8 Manuel utilisateur

Heatmiser

Heatmiser PRT-E Manuel utilisateur

Heatmiser

Heatmiser Slimline-RF Manuel utilisateur

Heatmiser

Heatmiser TM4-TS Manuel utilisateur

Heatmiser

Heatmiser smartstat Manuel utilisateur

Heatmiser

Heatmiser NeoAir V2-M Manuel utilisateur

Heatmiser

Heatmiser DT Manuel utilisateur

Heatmiser

Heatmiser PRT-EAU1 Manuel utilisateur

Heatmiser

Heatmiser PRT-UWTS Manuel utilisateur

Heatmiser

Heatmiser PRT-WTS Manuel utilisateur

Heatmiser

Heatmiser neoAir Manuel utilisateur

Heatmiser

Heatmiser touch-n Manuel utilisateur

Heatmiser

Heatmiser PRT-TS Manuel utilisateur

Heatmiser

Heatmiser PRTHW-TS Manuel utilisateur

Heatmiser

Heatmiser neoUltra Manuel utilisateur

Heatmiser

Heatmiser neoStat-hw V2 Manuel utilisateur

Heatmiser

Heatmiser PRT-E1 Manuel utilisateur

Heatmiser

Heatmiser DS1 Manuel utilisateur

Heatmiser

Heatmiser neoX Manuel utilisateur

Heatmiser

Heatmiser PRT-EW Manuel utilisateur

Heatmiser

Heatmiser PRT-EWTS Manuel utilisateur

Manuels Thermostat populaires d'autres marques

EWELLY

EWELLY EW-181 Manuel utilisateur

Prolon

Prolon T1100 Instructions d'installation

Computherm

Computherm Q20 Manuel utilisateur

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur

Saswell

Saswell SAS920XWHB-7-S-RF Mode d’emploi

Aircalo

Aircalo TFP1-ET85P2 Manuel utilisateur

Honeywell

Honeywell CM721 Manuel utilisateur

Carrier

Carrier DEBONAIR 33CS Manuel utilisateur

Lennox

Lennox iHarmony Zone Thermostat Instructions de montage

Gemtech

Gemtech GT7000 Mode d’emploi

Rollei

Rollei Smartes 45000 Manuel utilisateur

Sinope

Sinope TH1300RF Manuel utilisateur

Honeywell

Honeywell RLV4305 Manuel utilisateur

Honeywell

Honeywell Prestige 2.0 THX9421 Manuel utilisateur

NuTone

NuTone NTBZ48 Instructions d'utilisation d'origine

Stelpro

Stelpro MAESTRO ASMT402AD Manuel utilisateur

Honeywell

Honeywell T6811 Manuel utilisateur