Heatcon! EM 100 Manuel

Short instruction Extension module

heatcon! EM 100

0450000604-1915

Short instruction Extension module heatcon! EM 100

S. 2 0450000604-1915_KBA_heatcon!EM100_EbV_EN-Druck.docx

EN Syfety instructions

WARNING

Danger due to live parts.

Some components are electrically live. Contact with live parts can result in an electric shock, burns or even death. Before

working on the electrical system, observe the following points:

Switch the system to a zero volts state. Secure to prevent switching back on. Check for zero volts state.

1 EbV-Device bus

2 A10V Outputs

3 Adress switch

4 Inputs EFI and EFI10V

5 EbV- Device bus

6 230V connection

7 ARS Output

8 ARS Output

9 ARS Output

10 ARSP Output

0450000604-1915_KBA_heatcon!EM100_EbV_EN-Druck.docx S. 3

The heatcon! EM is an expansion for the inputs and outputs of a heatcon! EC inside the system, as shown in the technical data.

Technical data

Installation

Hat rail installation in the energy generator

Outlets

EbV –device bus

Connection technology

4-wire technology, screw terminal connection

Maximal zulässige Kabellänge

50 m

Power supply

230 V ±10 %, 50 Hz

Power consumption

max. 9VA

IP class

0(*)

IP rating

IP00

Fusing

User-supplied

Ambient conditions

•Storage temperature

•Operating temperature

-25 ... +60 °C

-10 ... +50 °C

Connections screw terminals

•Mains voltage L, N

•1 x potential-free relay ARSP, max. 230V / 2A

•3 x relay 230V ARS, max. 2A, sum current: max. 10A

•2 x sensor pulse input EFI

•2 x sensor pulse 0…10V input EFI 10V

•2 x output 0..10V-PWM A10VP

•2 x EbV –device bus

Standards

DIN EN 60730

Dimensions

106 x 90 x 61 mm (length x width x height) with hat rail

Weight

240 g

Colour

Grey

(*) Note

The heatcon! EM 100 is supplied with a top hat rail housing. Protection against contact and the IP 20 degree of protection must

be ensured by installation.

S. 4 0450000604-1915_KBA_heatcon!EM100_EbV_EN-Druck.docx

More information you will find:

https://ebv-gmbh.eu/downloads/

EN –Warranty conditions

Improper use, non-observation of these instructions, use of inadequately qualified personnel and independent changes exclude

any liability on the part of the manufacturer for the resulting damage. The manufacturer's warranty becomes void.

Impairment of device function if incorrect spare parts are used!

If unauthorised parts are used correct functioning is not assured. Use spare parts authorised by customer service.

EN–Declaration of Conformity

EbV Elektronikbau- und Vertriebs-GmbH assures that the product is produced according to valid EU regulations. A complete

version of the Declaration of Conformity can be found in the installation manual at https://ebv-gmbh.eu/downloads/

Copyright by

EbV

Elektronikbau- und Vertriebs-GmbH

Heisterner Weg 8-12

D-57299 Burbach

Federal Republic of Germany

Autres manuels heatcon! Unité de contrôle

heatcon!

heatcon! EM 110-OT Manuel

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur

heatcon! EM 100 Manuel

Manuels Unité de contrôle populaires d'autres marques