HDL SB-DN-Logic960 Manuel utilisateur

User Manual

Logic timer module

SB-DN-Logic960

Usable also for HDL-MCLog.431

Manual describes the snapshots taken in the

previous version of HBST. In HBST2, the graphic

appearance is slightly different but the functions

remain the same.

User Manual

SB-DN-Logic960

Logic timer–User Manual

INDEX

1. Overview...................................................................................................1

1.1 General Information.............................................................................1

1.1.1 Description .................................................................................1

1.1.2 Mounting.....................................................................................1

1.2 functionalities.................................................................................1

1.3 Device Description...............................................................................2

2. Technical Data..........................................................................................2

3. Installation................................................................................................3

3.1 Wiring ..................................................................................................3

4.2 HDL BUS Pro Description....................................................................3

4. Software Configurations.........................................................................4

4.1 Basic setting ........................................................................................4

4.1.1 Change the ID of the device...........................................................4

4.1.2 Remark ..........................................................................................5

4.2 Configurations ......................................................................................5

4.2.1 Equipment activation......................................................................5

4.2.2 Input conditions..............................................................................5

4.3 system setting.....................................................................................13

4.3.1: Date settings for timer.................................................................13

4.3.2 Geographic location settings........................................................13

4.3.2.1 Geographic location..................................................................13

4.3.3 Method of prayer times ................................................................14

4.3.4 Summer time settings ..................................................................14

5 applications...............................................................................................15

5. NOTES....................................................................................................22

User Manual

SB-DN-Logic960

Logic timer –User Manual 1

1. Overview

1.1 General Information

1.1.1 Description

SB-DN-Logic960 is an intelligent programmable logic controller which is developed by

HDL, it can control the system automatically by logic lines such as: - scene, channel

status, input status, date, time and so on. You can use AND, OR, NAD and NOR logic

blocks to build up different logics for different applications, moreover, it has real-time clock

so you can build up schedules too.

1.1.2 Mounting

Standard 35mm Din Rail Installation

Inside Distribution Box(DB)

1.2 functionalities

Supports 12 logic groups and each group have 20 logic tables.

Each logic table can set 4 logic input condition and 20 input targets.

Logical table input condition: Time, Date, Year, Week, Scene working status, external

device input status, Wall panel status, and security setting.

Logic relation: AND, OR, XOR, NAND



User Manual

SB-DN-Logic960

Logic timer –User Manual 2

1.3 Device Description

2. Technical Data

Electric Parameter ：

Bus power

DC12~30V

Bus power consumption

15mA/DC24V

Environmental Condition：

Working temperature

-5℃~45℃

Working relative humidity

Up to 92%

Storage temperature

-40℃~+60℃

Storage relative humidity

10%~93%

Approved

RoHS

Production information：

Dimensions

72×88×66 (mm)

Installation

35mm Din Rail installation

Protection degree

IP20

a. LED indicator

b. programming button

c. HDL-bus pro

User Manual

SB-DN-Logic960

Logic timer –User Manual 3

3. Installation

3.1 Wiring

Please follow the wiring showed below strictly.

4.2 HDL BUS Pro Description

Connector Information

buspro

DC24V

Red

COM

Black

DATA-

White

DATA+

Yellow

User Manual

SB-DN-Logic960

Logic timer –User Manual 4

4. Software Configurations

4.1 Basic setting

4.1.1 Change the ID of the device

Each HDL-device has subnet and Device ID and each module’s Device ID must be unique

and different from other devices on the same Bus, the subnet ID should be the same as

the HDL-Bus gateway (typically the SB-DN-1IP or HDL-MBUS01IP.431).

Method One:

1. Run the HDL-BUS Pro Setup tool.

2. Long press the “programming button” and keep pressing it for 3 seconds until it turns to

a red color.

3. On the software, click ton “Address management”, and select

“Modify address (when device button is pressed)” option, it will show a window like

below:

4. click on “Indicate initial address”, then it will show the current subnet/device ID of this

User Manual

SB-DN-Logic960

Logic timer –User Manual 5

module. to modify the address, fill in the new address, and click the “Modify initial

address ”Click the “+Add” button, the device will be added to “ON-line devices “list.

Method two:

1- Run HDL-bus pro tool

2- Search for the online devices by clicking on search button and the device will be

displayed on “online device list”

4.1.2 Remark

To give a name to the module, so you can recognize it from other modules.

4.2 Configurations

As mentioned above the logic module is used for automating other HDL modules.

And in this tab, we will see how to setup a logic table with input conditions.

4.2.1 Equipment activation

If this option is unchecked, it means that the logic module has been disabled and will no

longer perform any process.

4.2.2 Input conditions

First select a logic table from the “logic No”list, double click on the blank black area to

start configuration and then select a logic relation from (AND, OR, XOR, NAND) according

to your requirements.

User Manual

SB-DN-Logic960

Logic timer –User Manual 6

-As the logic module is a very flexible automation device, there are many input conditions

that will be used to reach any possible logic, each logic table can have maximum of four

input conditions.

Below are the explanations of each logic input:-

User Manual

SB-DN-Logic960

Logic timer –User Manual 7

a) Year type:

This input is to select specific year, date or between years and dates.

b) Date type: You can specify date data with a numeric month.

Options:-

-At date point: select a designate or specific date for example: June 4th

-Date period: you can select interval of time (date), for example: from Oct 7th-Nov 30th

-Every month: this is the whole year settings.

c) Week type: you can select a specific week day or between weekdays (from specific day

to another) e.g.: from Monday- Friday

d) Time type: this is used to set a particular day time or before and after specific time.

User Manual

SB-DN-Logic960

Logic timer –User Manual 8

-specific time: select a particular time, you can also set the specific time as sunrise or

sunset (you need to set the time for sunrise and sunset on the system settings

tab)

e) Universal switch: is a general communication method for all modules, some devices

can send out UV switch to logic module. So you can set a UV switch as your input

condition.

f) Exterior input value

This function is used to detect an output value. For now it’s only used for temperature,

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels HDL Unité de contrôle

HDL

HDL M/P2R.1 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur