Hanna Instruments HI 151-02 Manuel utilisateur

IST151-02 03/05

www.hannainst.com

Instruction Manual

Checktemp 4

(HI 151-02)

Rugged Folding

Thermometer

Range -50.0 to +150.0°C

Resolution 0.1°C

Accuracy ±0.5°C±1 digit (-50.0 to 100.0°C);

(@25ºC/77ºF) ±1.0°C±1 digit (outside)

Typical EMC Deviation ±0.3°C

Probe Stainless steel sharp probe (117 x 3.5 mm)

Calibration Factory calibrated

Battery Type / Life 1x1.5V AA / 25.000 hours of continuous use

Auto-off After 8 minutes of non-use

Dimensions 165x50x20 mm (6.5 x 2.0 x 0.8”)

Weight 100 g (3.6 oz)

SPECIFICATIONS

HI 151-02 is warranted for one year against defects in workmanship and materials when used for its

intended purpose and maintained according to instructions. This warranty is limited to repair or replace-

ment free of charge.

Damages due to accident, misuse, tampering or lack of prescribed maintenance are not covered.

If service is required, contact the dealer from whom you purchased the instrument. If under warranty,

report the model number, date of purchase, serial number and the nature of the failure. If the repair is

not covered by the warranty, you will be notified of the charges incurred. If the instrument is to be

returned to Hanna Instruments, first obtain a Returned Goods Authorization Number from the Customer

Service department and then send it with shipment costs prepaid. When shipping any instrument, make

sure it is properly packaged for complete protection.

All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner,

Hanna Instruments.

WARRANTY

Checktemp 4 is an easy-to-use thermometer, offering quick and precise measurements.

Checktemp 4 is the ideal solution for food applications. The sharp stainless steel probe

is specially designed for penetration of cooked as well as on semi-frozen food. In

addition, the probe nestles in the casing to make the thermometers truly portable.

TAKING MEASUREMENTS

• Turn the meter on by simply opening the probe.

• Introduce the probe in the sample. For ideal measurement an immersion level of 4

cm (11/2’’) is recommended. Wait for a few seconds for the reading to stabilize and

for the temperature value be displayed on the LCD.

• After 8 minutes, the meter switches itself off. To restart, close and open the probe

again.

• Turn the meter off by closing the probe and returning it to its original position.

Note: Clean the probe after use and before storing it.

CE DECLARATION OF CONFORMITY

Recommendations for Users

Before using these products, make sure that they are

entirely suitable for the environment in which they are

used. Operation of these instruments in residential ar-

eas could cause unacceptable interferences to radio and

TV equipment. Any variation introduced by the user to

the supplied equipment may degrade the instrument’s

EMC performance. To avoid electrical shock, do not use

these instruments when voltages at the measurement

surface exceed 24 VAC or 60 VDC. To avoid damages or

burns, do not perform any measurement in microwave

ovens.

“Err” warning message, variations in readings or fading display can indicate a low

battery level. Remove the cover of the battery compartment on the back side and

replace the 1.5V AA battery while paying attention to its polarity.

BATTERY REPLACEMENT

Autres manuels Hanna Instruments Thermomètre

Hanna Instruments

Hanna Instruments HI 8752 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 98701 Manuel utilisateur

Hanna Instruments

Hanna Instruments Foodcare HI 93501 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 935005 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 92840 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 9061 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 98701 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 99556 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 955202 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 9060 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 146-00 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 145-00 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 98509-1 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 9043 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 935005 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 8757 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 92804 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 9040 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI98197 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 93551 Manuel utilisateur

Hanna Instruments

Hanna Instruments DiST 7 Manuel utilisateur

Hanna Instruments

Hanna Instruments Checktemp Dip HI98539 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI935012 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 99550-00 Manuel utilisateur

Manuels Thermomètre populaires d'autres marques

Delton

Delton 981A Manuel utilisateur

Baker

Baker MM2P Manuel utilisateur

Tarmo

Tarmo 320281 Manuel utilisateur

Citizen

Citizen CTD 504 Manuel utilisateur

TFA

TFA 14.1500 Manuel utilisateur

Vive

Vive DMD1010 Manuel utilisateur

Gotemp

Gotemp THB4002 Manuel utilisateur

GREISINGER

GREISINGER G 1202 Manuel utilisateur

Amprobe

Amprobe TMD-53W Manuel utilisateur

Trotec

Trotec BP10 Manuel utilisateur

Radiance instruments

Radiance instruments RT616 Series Manuel utilisateur

Eurolec

Eurolec IR151 Manuel utilisateur

Scaneo

Scaneo TS42B Manuel utilisateur

Sper scientific

Sper scientific 800043 Manuel utilisateur

Microlife

Microlife NC 200 Mode d’emploi

Motorola

Motorola MBP69SN Guide de configuration

The MeatStick

The MeatStick The MeatStick Manuel utilisateur

Hama

Hama TH35-A Manuel utilisateur