Hanna Instruments HI6321 Manuel utilisateur

Hanna Instruments Inc., 584 Park East Drive, Woonsocket, RI 02895 USA www.hannainst.com

Please scan the QR code or follow the link

to download the user manual.

https://manuals.hannainst.com/HI6321

Hanna®is committed to developing and deploying digital

solutions with a positive impact on the environment and climate.

Package contents

• HI6321

• HI7631233 four-ring conductivity probe

• 1413 μS/cm conductivity standard solution (4 sachets)

• 5000 μS/cm conductivity standard solution (2 sachets)

• 12880 μS/cm conductivity standard solution (2 sachets)

• Electrode rinse solution (2 sachets)

20 mL

Forlaboratory and industrial use only.

Storeat room temperature.

Forlaboratory and industrial use only.

Storeat room temperature.

±5μS/cm @ 25 °C (77 °F)

Traceableto NIST Standard reference material

±5μS/cm @ 25 °C (77 °F)

Traceableto NIST Standard reference material

Conductivity StandardConductivity Standard

1413 μS/cm1413 μS/cm

HI70031HI70031

20 mL

Forlaboratory and industrial use only.

Storeat room temperature.

Forlaboratory and industrial use only.

Storeat room temperature.

±20μS/cm @ 25 °C (77 °F)

Traceableto NIST Standard reference material

±20μS/cm @ 25 °C (77 °F)

Traceableto NIST Standard reference material

Conductivity StandardConductivity Standard

5000 μS/cm5000 μS/cm

HI70039HI70039

20 mL

Forlaboratory and industrial use only.

Storeat room temperature.

Forlaboratory and industrial use only.

Storeat room temperature.

±50μS/cm @ 25 °C (77 °F)

Traceableto NIST Standard reference material

±50μS/cm @ 25 °C (77 °F)

Traceableto NIST Standard reference material

Conductivity StandardConductivity Standard

12880 μS/cm12880 μS/cm

HI70030HI70030

Electrode

Rinse

Solution

Electrode

Rinse

Solution

HI70000HI70000

~20mL @25°C /77 °F

• Electrode arm with base plate and screws (mounting)

• 24 VDC power adapter and USB-C to USB-A cable

• Probe quality certificate, instrument quality certificate,

quick reference guide

HI6321 Advanced Conductivity Benchtop Meter

Quick Reference Guide

Dear Customer, thank you for choosing Hanna Instruments.

Getting started

Identify the base plate (1) – to be attached to the Lor the Rside –

and mounting screw (2) and proceed as illustrated here.

With the arm holder (3) in position and the probe (4) plugged in,

connect the power cable (5) and plug into the mains. Press the

ON/OFF button (6) to start.

Remove the transparent film that protects the capacitive touchscreen

prior to operating the meter.

HHII632211

Conductivity

Ethernet

Extension

USB-A

USB-C

ON/OFF

Power

24Vdc

56 4

Operating language & Access to support

• At first power on default operating language is English. Browse

the language window and select operating language from list of

supported options.

• To access support, tap and select .

On first access the benchtop’s name is used as default user name

and no password is required.

Device handling & Safety precautions

• Transport the unit with all cables removed.

• Do not puncture the capacitive touchscreen.

• Do not insert objects into the ports, spaces around keys other

than the intended cable, USB drive.

Hanna Instruments Inc., 584 Park East Drive, Woonsocket, RI 02895 USA www.hannainst.com

Please retain for future use. QR6321 12/22

All Hanna instruments conform to the CE European Directives and UK Standards, and our production facilities are ISO 9001 certified. HI6321 is warranted for a period

of two years and the probe for six months against defects in workmanship and materials when used for their intended purpose and maintained according to instructions.

For technical information e-mail us at [email protected]. Visit www.hannainst.com for more information about Hanna Instruments and our products.

Capacitive touchscreen

Users Settings Log Recall Help

Channel

Settings

Back key Home key Menu key

• return to a previous hierarchical menu level

• access to measurement screen

• access to:

`Users login & rights configuration

`Settings system configuration, connectivity & printing items

`Log Recall logged measurement data

`Help support

• from measurement screen, tap to access measurement menu

Probe usage & Calibration tips

Accessories: rinse container, calibration container, calibration

standard, DI water

Prior to placing the probe into a standard:

• Remove the transparent protective ring (1).

• Rinse in DI water and gently shake off excess water.

• Immerse the probe in rinse container ensuring that probe’s holes

(3) are completely submerged. Swirl and remove.

• Immerse and swirl the probe several times to prime the probe.

Calibration tips

• Ensure the probe is correctly plugged in.

• Use fresh standards with a value close to that of the sample.

• Pour fresh standard in calibration container, immerse the probe,

gently swirl, and remove.

• Immerse and swirl the probe several times.

• Gently tap the probe to remove trapped air bubbles.

• Wait for the temperature to stabilize and the probe to acclimate

to the solution.

• Calibrate frequently and discard standard after use.

Conductivity measurement tips

• Work with recently calibrated probes.

• Substitute calibration standard with measured sample and

follow calibration recommendations.

• Use the arm holder for easy probe transfer in and out of

container and correct probe positioning, away from container

walls or bottom.

• TDS measurement: use correct TDS conversion factor for

measured sample.

• Record measured data once the reading is stable.

• Clean and rinse off any residual sample on the sensors (2) after

measurement to keep the probe in optimum condition.

Logging in & Creating a new account

1. Power the meter and tap .

2. Tap followed by

3. Tap Edit Users to enter Account Management.

4. Tap to enable Account Creation and Logins. Tap to return.

5. Tap Logout to enter Users screen. Tap the plus symbol avatar.

6. Input user name and tap .

7. Enter password and tap . Re-enter password to confirm.

Autres manuels pour HI6321

Autres manuels Hanna Instruments Instrument de mesure

Hanna Instruments

Hanna Instruments HI 93750 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI6221 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 96832 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI97770 Manuel utilisateur

Hanna Instruments

Hanna Instruments WATER TEST Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 93754G-25 MR Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 8424 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 981404N Manuel utilisateur

Hanna Instruments

Hanna Instruments BL 7916 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 96707C Manuel utilisateur

Hanna Instruments

Hanna Instruments HI97707 Manuel utilisateur

Hanna Instruments

Hanna Instruments HALO 2 HI9810402 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 121 Manuel utilisateur

Hanna Instruments

Hanna Instruments EC GroChek Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 83900 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI769828 Manuel utilisateur

Hanna Instruments

Hanna Instruments pHep HI 98107 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 98186 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 702 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI96800 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI97732 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 991002 Manuel utilisateur

Hanna Instruments

Hanna Instruments edge DO Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 95734C Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur