Hanna Instruments 98192 Manuel utilisateur

SPECIFICATIONS

•RANGE

EC 0.001 to 9.999 µS/cm*, 10.00 to 99.99 µS/cm,

100 to 999.9 µS/cm, 1.000 to 9.999 mS/cm,

10.00 to 99.99 mS/cm, 10.00 to 99.99 mS/cm,

100.0 to 1000.0 mS/cm

Actual conductivity 1000.0 mS/cm

Shows values up to 1000.0 mS/cm

Resistivity 1.0 to 99.9 ohms, 100 to 999 ohms,

1.00 to 99.9 Kohms, 10.0 99.9 Kohms,

100 to 999 Kohms, 1.00 to 9.99 Mohms,

10.0 to 100.0 Mohms*

TDS 0.00 to 999.9 ppm

1.000 to 400.0 g/L

Salinity

% NaCl 0.0 to 400.0 % NaCl

Sea Water Scale 0.00 to 80.00 ppt

Practical Salinity 0.01 to 42.00 (PSU)

Temperature –20.0 to 120.0 °C (-4.0 to 248.0 °F)

•ACCURACY

EC ±1% of reading (±0.01 µS/cm or 1 digit)

Resistivity ±1% of rdg (10 ohm or 1 digit)

TDS ±1% of reading (±0.05 ppm or 1 digit)

Salinity ±1% of reading

Temperature ±0.2 °C

OPERATIONAL GUIDE

•To switch ON and OFF: press ON/OFF ( ).

•To take measurements: with meter off, connect the electrode’s DIN connector

to appropriate socket, remove the protective cap and immerse the electrode in the

solution with the sleeves holes completely submerged. Switch on the meter. Stir

briefly and wait for a stable reading. For accurate readings tap the probe

repeatedly to remove any air bubbles that may be trapped inside the sleeve.

•To select the range, conductivity, resistivity TDS or salinity: press RANGE.

* The 0.001 µS/cm EC range and 100 MOhms Resistivity range are not available with the 4 m cable probe.

HI 98192

USP Compliant

EC/TDS/NaCl/Resistivity/Temperature

Portable Meter

Quick Reference GuideQuick Reference Guide

Quick Reference Guide

•To enter USP or Salinity range while in EC range: press MODE.

•To enter Calibration mode: press CAL while in EC or Salinity range.

•To change calibration solution: press the ARROW keys.

EC (RESISTIVITY/TDS) CALIBRATION PROCEDURE

Up to five calibration points are available:

•Keep the probe in air for the first point.

•Wait for “CFM”. Press CFM to confirm offset calibration.

•Place the probe in the appropriate standard solution. The instrument will detect

the standard.

•Wait for “CFM” blinking. Press CFM to accept the calibration. Repeat until all

five calibration points are done.

•To perform a one, two, three or four point calibration press ESC after the appropriate

point was confirmed.

Note: Resistivity and TDS readings are automatically derived from the EC reading

and no specific calibration for TDS is needed.

NaCl CALIBRATION PROCEDURE

•Place the probe in 100% NaCl standard solution.

•Wait for “CFM” blinking.

•Press CFM to accept the calibration. The meter returns to measurement mode.

SETUP MODE

•To enter/exit SETUP mode: press SETUP while in measurement mode.

•To toggle between the displayed parameters: press the ARROW keys.

•To enter/exit SETUP changing mode: press Modify or simply select option.

GLP MODE

•To store the current reading into the memory: press LOG while in measurement

mode.

•To view logged data: press RCL while in measurement mode.

•To view more details: press More.

•To delete records: press Delete key.

•To delete all records: press Delete All.

AutoEnd MODE

•To freeze the first stable reading on the LCD: press AutoEnd while in measurement

mode; the “WAIT“ tag will blink until the reading will stabilize, then “Hold”

will be displayed.

•To return to the measurement mode: press Continue.

QR98192 07/14

www.hannainst.com

Table des matières

Autres manuels Hanna Instruments Instrument de mesure

Hanna Instruments

Hanna Instruments HI 2222 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 991300 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 9142 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 141 Series Manuel utilisateur

Hanna Instruments

Hanna Instruments WATER TEST Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 96750 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 5315 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 4521 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 98140 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 221 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 93750 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 96715C Manuel utilisateur

Hanna Instruments

Hanna Instruments Free Chlorine HI701 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 2300 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI97731 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI97719 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 99131 Manuel utilisateur

Hanna Instruments

Hanna Instruments Checktemp 1 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 4107 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI84534 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI96841 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 4211 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 717 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI8417 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur