1. Before you begin installing the fan, shut power off at
the circuit breakeror the fuse box.
2. Be cautious! Read all instructions and safety
information before installing your new fan. Review
accompanying assembly diagrams.
3. Make sure that all electrical connections comply with
local codes, ordinances, or National Electrical Codes.
Hire a qualified electrician or consult a do-it-yourself
wiring handbook if you are unfamiliar with installing
electrical wiring.
4. Make sure the installation site you choose allows the fan
blades to rotate without any obstructions. Allow a
minimum clearance of 7 feet from the floor and 18
inches from thetip of the blades to the wall.
5. If you are mounting the fan to a ceiling outlet box, use
U.L. Listed metal octagonal outlet box marked
"Acceptable for fan support". Secure the box directly to
the building structure. The outlet box and its support
must be able to support the moving weight of the fan (at
least 50 lbs.)Do not use a plastic box.
6. Caution: To reduce the risk of personal injury use only
the screws providedwith the outletbox.
7. If you are mounting the fan to a joist, make sure it is able
to support themoving weight of the fan (at least 50 lbs.).
1. Safety Rules
8. After you install the fan, make sure that all mountings are
secured to preventthe fan from falling.
9. Do not insert anything into the fan blades while the fan is
operating.
10. Turn the fan off and wait for it to stop completely beforechanging
the fan direction.
NOTE: The important safeguardsand instructions appearing in this
manual are notmeant to cover all possible conditions and situations
that may occur. It must be understood thatcommon sense, cautionand
care are factorswhich can not be built into this product. These factors
must be suppliedby the person(s) installing, caring for and operating
the unit.
TO REDUCETHE RISK OF FIRE, ELECTRIC SHOCK, OR OTHER PERSONAL
INJURY, MOUNT FAN ONLY TOAU.L. LISTED OUTLETBOX OR SUPPORTING
SYSTEM MARKEDACCEPTABLE FORFAN SUPPORT ANDUSE MOUNTING
SCREWS PROVIDED WITHTHE OUTLETBOX IN CONJUNCTIONWITH THE
LOCK WASHERS PROVIDED WITHTHE FAN, MOST OUTLETBOXES
COMMONLYUSED FOR THESUPPORT OFLIGHTING FIXTURES ARE NOT
ACCEPTABLE FORFAN SUPPORT ANDNEED TO BE REPLACED. CONSULT A
QUALIFIED ELECTRICIAN IFIN DOUBT.
TO REDUCETHE RISK OF PERSONAL INJURY,DO NOT BENDTHE BLADE
HOLDERS WHILE INSTALLING, BALANCING THEBLADES, OR CLEANING
THE FAN.DO NOT INSERT FOREIGN OBJECTSBETWEEN ROTATING FAN
BLADES.
TO REDUCETHE RISK OF FIRE OR ELECTRIC SHOCK, DO NOTUSE THIS FAN
WITH ANYSOLID-STATE SPEED CONTROLDEVICE
WARNING
NOTE
READ AND SAVE ALL INSTRUCTIONS!
