Hamlet HNWU300NN Manuel utilisateur
Wi-Fi 300N
Nano USB Adapter
USER MANUAL
HNWU300NN
www.hamletcom.com
2
Table of Contents
1. Introduction ....................................................................................................... 4!
1.1 Product Features .................................................................................................................4!
1.2 Package contents ................................................................................................................4!
2. Wireless USB Adapter Installation .................................................................. 5!
2.1 Driver Installation.................................................................................................................5!
2.2 Connect to Wireless Access Point.......................................................................................8!
3. Client Utility ..................................................................................................... 15!
3.1 Connection Profile Management .......................................................................................15!
3.2 General Information, Status and Network Statistics ..........................................................20!
3.3 Other Settings....................................................................................................................22!
3.4 Establish secure connection using WPS ...........................................................................23!
4. Soft AP Function ............................................................................................. 27!
4.1 Switch to AP Mode and Station Mode ...............................................................................27!
4.2 Advanced Settings.............................................................................................................30!
4.3 Wireless Statistics .............................................................................................................31!
4.4 Internet Connection Sharing (ICS) ....................................................................................32!
5. Troubleshooting.............................................................................................. 33!
3
Dear Customer,
thanks for choosing an Hamlet product. Please carefully follow the instructions for its use and
maintenance and, once this item has run its life span, we kindly ask You to dispose of it in an
environmentally friendly way, by putting it in the separate bin for electrical/electronic waste, or to
bring it back to your retailer who will collect it for free.
Responsibility Statement
The European importer declares that this product is compliant with CE standards. Importer
references and contact details available on www.hamletcom.com in the “About Us” section.
The importer for Italy is:
Careca Italia S.p.A.
VAT number 02078660350
www.careca.com
The complete CE declaration of conformity of the product can be obtained by contacting Hamlet
The information on the importer for your country are available in the “About Us” section of the
Hamlet website at www.hamletcom.com.
We inform You this product is manufactured with materials and components in compliance with
RoHS directive 2011/65/EU, with RAEE directive 2002/96/CE, 2003/108/EC Italian Legislative
Decree 2005/151 and EMC 2004/108/EC, R&TTE 1999/5/EC, LVD 2006/95/EC directives for the
following standards:
EN 60950-1: 2006 + A11: 2009 + A1: 2010 + A12: 2011 + A2: 2013, EN 62311: 2008,
EN 300 328 V1.8.1 (2012), EN 301 489-1 V1.9.2 (2011), EN 301 489-17 V2.2.1 (2012).
CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause radio interference,
in which case the user may be required to take adequate measures.
Trademarks and Changes
All trademarks and company names mentioned in this document are used for description
purpose only and remain property of their respective owners.
The material in this document is for information only and subject to change without notice.
Specifications and appearance are subject to change without prior notice.
4
1. Introduction
Hamlet Wi-Fi 300N Nano USB Adapter connects a desktop or notebook computer to a Wi-Fi
network using 802.11n standard that allows wireless connection speed up to 300 Mbps.
Wireless N standard maximizes speed and extend wireless coverage ensuring better
performance for video streaming and online gaming.
The ultra compact design makes it convenient and easy to carry. You can always leave it
plugged into your computer without worrying about blocking adjacent USB ports.
1.1 Product Features
•Complies with IEEE 802.11n, IEEE 802.11g and IEEE 802.11b wireless standards
•Supports 2.4GHz frequency band
•Wireless data rates: up to 300Mbps
•RTL8192EU chipset
•Wireless range: 10 m
•Internal antenna (2dBi)
•Transmit Power (EIRP): 100mW
•USB 2.0 interface connection (480Mbps)
•Supports 20MHz/40MHz frequency width
•Auto-detects and changes the network transmission rate
•Provides two work modes: Infrastructure and Ad-Hoc
•Supports Soft AP to establish your wireless LAN networking
•Supports 64/128-bit WEP, WPA, WPA2 encryption methods and 802.1x security
authentication standard
•Supports WPS (Wi-Fi Protected Setup) encryption method
•Easy plug and play installation
•Dimensions (L x W x H): 22 !16.4 !8.5 mm
•Compatible with: Windows XP/Vista/7/8 and 10, Mac OS X 10.4 or above, Linux
1.2 Package contents
The Wireless USB Adapter package includes the following.
•Wireless Nano USB Adapter
•Quick Installation Guide
•Driver CD
The latest drivers are available on the website www.hamletcom.com
5
2. Wireless USB Adapter Installation
This chapter is to assist you how to use the included CD-ROM which comprises the Driver and
the Client Utility Interface.
2.1 Driver Installation
Please follow the following instructions to install your new wireless USB Adapter.
1. Insert the nano USB wireless adapter into an empty USB 2.0 port of your computer when
computer is switched on.
2. If the following message will appear on your computer, click Cancel/Close.
Under Windows XP
Under Windows Vista and Windows 7
6
3. Insert the driver CD into your CD-ROM. The autorun screen below will appear. if not, you can
double click autorun.exe file on CD.
4. Click Install Driver to start the installation procedure.
5. Follow the installation wizard and click Next to continue.
7
6. Once the installation is finished the computer will be asked to reboot. you can click Finish
and reboot the computer to finish the installation of driver files.
After the installation the new icon of the wireless utility software will appear on the desktop and
near the clock in the system tray.
Left-click the icon will launch wireless network configuration utility, and you can right-click the
icon to show the quick menu of configuration utility.
This icon also uses different color to show the status of wireless connection:
Wireless connection is established, good signal reception.
Wireless connection is established, weak signal reception.
Connection is not established yet.
Wireless network adapter is not detected.
For detailed instructions of wireless network configuration utility, please see next chapter.
8
2.2 Connect to Wireless Access Point
To use wireless network, you have to connect to a wireless access point first. You can either use
Client utility (comes with network adapter driver), or Windows Zero Config utility (comes with
Windows operating system).
Using Client Wireless Utility
Please follow the following instructions to use Client configuration utility to connect to wireless
access point.
1. Left-click the Client configuration utility icon located at lower-right corner of computer desktop,
and configuration menu will appear.
2. Wireless utility will appear. Click Available Network menu to search for wireless access
points nearby.
Please wait for a while, and all wireless access points which can be reached by this wireless
network adapter will be displayed here.
If the wireless access point you wish to connect does not appear here, you can click Refresh
button to scan for wireless access points again; if the wireless access point you’re looking for still
not appear, try to move the computer closer.
9
3. When the access point you’re looking for is on the list, double click it or click Add to Profile.
4. If a password (“Network Key”) is required to access the wireless access point, please input it
in Network key text field (and input it again in Confirm network key for confirmation).
NOTE: Network security type (Network Authentication and Data encryption) will be selected
automatically based on wireless access point’s security setting. It’s not required to change these
settings by yourself.
10
5. After the password is properly inserted, click OK to confirm.
The network adapter will attempt to connect to access point now, this may require few seconds
to minutes. When the “Status” become “Associated”, your computer is connected to access point
you selected and you can close the client configuration utility.
NOTE: If you connected to an access point but the connection has been dropped soon, please
check security settings and re-check password spelling.
Table des matières
Autres manuels Hamlet Modem
Manuels Modem populaires d'autres marques
Davicom
Davicom DM562AP Manuel utilisateur
EpiValley
EpiValley TATA indicom SXC-1080 Manuel utilisateur
Zte
Zte WiMAX Manuel utilisateur
Intelimax
Intelimax MA-2060 Manuel utilisateur
SMC Networks
SMC Networks D3CM1604V Manuel d'utilisation et d'entretien
Telstra
Telstra Wi-Fi 4G Advanced Pro X Manuel utilisateur
US Robotics
US Robotics 3453C Manuel utilisateur
MaxTech
MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuel utilisateur
Zte
Zte MF823 Manuel utilisateur
Four-Faith
Four-Faith F1403 Manuel utilisateur
Sierra Wireless
Sierra Wireless AIRLINK MP595W Manuel utilisateur
Gemtek
Gemtek WiMAX WIXFBR-103 Manuel utilisateur