H3C WA538 Manuel utilisateur

H3C WA538 Access Point

Installation Guide

New H3C Technologies Co., Ltd.

http://www.h3c.com

Document version: 6W102-20190527

No part of this manual may be reproduced or transmitted in any form or by any means without prior written

consent of New H3C Technologies Co., Ltd.

Trademarks

Except for the trademarks of New H3C Technologies Co., Ltd., any trademarks that may be mentioned in this

document are the property of their respective owners.

Notice

The information in this document is subject to change without notice. All contents in this document, including

statements, information, and recommendations, are believed to be accurate, but they are presented without

warranty of any kind, express or implied. H3C shall not be liable for technical or editorial errors or omissions

contained herein.

Environmental protection

This product has been designed to comply with the environmental protection requirements. The storage, use,

and disposal of this product must meet the applicable national laws and regulations.

Preface

This installation guide describes the installation procedure for the H3C WA538Access Point.

This preface includes the following topics about the documentation:

•Audience.

•Conventions.

•Documentation feedback.

Audience

This documentation is intended for:

•Network planners.

•Field technical support and servicing engineers.

•Network administrators working with the WA538.

Conventions

The following information describes the conventions used in the documentation.

Command conventions

Convention Description

Boldface Bold text represents commands and keywords that you enter literally as shown.

Italic Italic text represents arguments that you replace with actual values.

[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.

{ x | y | ... }

Braces enclose a set of required syntax choices separated by vertical bars, from which

you select one.

[ x | y | ... ]

Square brackets enclose a set of optional syntax choices separated by vertical bars,

from which you select one or none.

{ x | y | ... } *

Asterisk marked braces enclose a set of required syntax choices separated by vertical

bars, from which you select a minimum of one.

[ x | y | ... ] *

Asterisk marked square brackets enclose optional syntax choices separated by vertical

bars, from which you select one choice, multiple choices, or none.

&<1-n> The argument or keyword and argument combination before the ampersand (&) sign

can be entered 1 to n times.

# A line that starts with a pound (#) sign is comments.

GUI conventions

Convention Description

Boldface Window names, button names, field names, and menu items are in Boldface. For

example, the New User window opens; click OK.

> Multi-level menus are separated by angle brackets. For example, File > Create >

Folder.

Symbols

Convention Description

WARNING! An alert that calls attention to important information that if not understood or followed

can result in personal injury.

CAUTION: An alert that calls attention to important information that if not understood or followed

can result in data loss, data corruption, or damage to hardware or software.

IMPORTANT: An alert that calls attention to essential information.

NOTE: An alert that contains additional or supplementary information.

TIP: An alert that provides helpful information.

Network topology icons

Convention Description

Represents a generic network device, such as a router, switch, or firewall.

Represents a routing-capable device, such as a router or Layer 3 switch.

Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that

supports Layer 2 forwarding and other Layer 2 features.

Represents an access controller, a unified wired-WLAN module, or the access

controller engine on a unified wired-WLAN switch.

Represents an access point.

Represents a wireless terminator unit.

Represents a wireless terminator.

Represents a mesh access point.

Represents omnidirectional signals.

Represents directional signals.

Represents a security product, such as a firewall, UTM, multiservice security

gateway, or load balancing device.

Represents a security module, such as a firewall, load balancing, NetStream, SSL

VPN, IPS, or ACG module.

Examples provided in this document

Examples in this document might use devices that differ from your device in hardware model,

configuration, or software version. It is normal that the port numbers, sample output, screenshots,

and other information in the examples differ from what you have on your device.



Documentation feedback

You can e-mail your comments about product documentation to info@h3c.com.

We appreciate your comments.

Contents

Preparing for installation ····································································1

Safety recommendations ·············································································································1

Temperature and humidity requirements ·························································································1

Installation accessories ···············································································································1

Installation tools·························································································································2

Installing the AP···············································································3

Installation flowchart ···················································································································3

Pre-installation tasks···················································································································3

Determining the installation position ·······························································································3

Installing the AP ························································································································4

Mounting the AP on a wall·····································································································4

Mounting the AP on a ceiling ·································································································7

Connecting the AP to the power source ··························································································8

Check before power-on ········································································································8

Connecting the PoE power supply ··························································································8

Connecting the local power supply ··························································································9

PoE injector power supply ··································································································· 10

Check after power-on ········································································································· 10

Connecting the AP to the network································································································ 10

Appendix A Technical specifications··················································· 12

Appendix B Ports and LEDs ·····························································13

Ports ····································································································································· 13

LEDs····································································································································· 14

Preparing for installation

Safety recommendations

WARNING!

Only qualified personnel can install and remove the AP and its accessories. You must read all

safety instructions before installation and operation.

To avoid possible bodily injury and equipment damage, read the following safety recommendations

before installing the AP. Note that the recommendations do not cover every possible hazardous

condition.

•Take adequate safety measures to avoid body injury and device damage.

•Place the AP in a dry and flat location and take anti-slip measures.

•Keep the AP clean and dust-free.

•Do not place the AP in a moist area and avoid liquid intrusion.

•Keep the AP and installation tools away from walkways.

Temperature and humidity requirements

Table 1 Temperature and humidity requirements

Item Specification

Operating temperature 0°C to 45°C (32°F to 113°F)

Storage temperature –40°C to +70°C (–40°F to +158°F)

Operating humidity 5% RH to 95% RH, noncondensing

Installation accessories

Figure 1 Accessories provided with the AP

Installation tools

When installing the AP, you might need the following tools. Prepare the installation tools as

required.

Figure 2 Installation tools

Installing the AP

Installation flowchart

Figure 3 Installation flowchart

Pre-installation tasks

Before installing the AP, perform the following tasks:

•Connect the AP to a power source and the network. Examine the LEDs to verify that the AP

operates correctly. For information about AP LEDs, see "LEDs."

•Record the MAC address and serial number at the rear of the AP for future use.

•Make sure you have completed cabling at the installation site.

Determining the installation position

Determine the installation position by observing the following principles:

•Few obstacles such as wall exist between the AP and clients.

•The AP is far away from electronic devices (such as microwave oven) that might generate

radio frequency (RF) noise.

•The AP does not hinder people’s daily work and life.

•The place is not water seeping, water soaking, and condensing.

•The AP is more than 5 m (16.40 ft) away from 3G and 4G stations and antennas.

Determine the

installation method Mount the wall/ceiling

bracket to a wall

Mount the wall/ceiling

bracket to a ceiling tile

Install the AP

Connect the power cord

Start

Connect the AP to the

network

Pre-installation tasks

Ceil-mount Wall-mount

End

Installing the AP

The AP can be installed only indoors. You can mount the AP on a wall or a ceiling.

The mounting bracket kit for the AP includes an AP bracket and a wall/ceiling bracket. To install the

AP on a wall or ceiling, attach the AP bracket to the AP and the wall/ceiling bracket to the wall or

ceiling.

Figure 4 Mounting bracket kit

(1) AP bracket (2) Alignment peg

(3) Wall/Ceiling bracket (4) Installation hole

Figure 5 Wall/Ceiling bracket installation holes

Mounting the AP on a wall

1. Set the alignment pegs on the AP bracket into the alignment holes in the AP rear. Use the M4

× 7 screw to secure the AP bracket to the AP through the installation hole in the middle of the

AP bracket.

Table des matières

Autres manuels H3C Point d'accès sans fil

H3C

H3C WA5620i-ACN Manuel utilisateur

H3C

H3C WA4320-ACN-PI Manuel utilisateur

H3C

H3C WA6320H-HI Manuel utilisateur

H3C

H3C WA2620-AGN Manuel utilisateur

H3C

H3C WA4320X Manuel utilisateur

H3C

H3C WA Series Manuel d'installation

H3C

H3C WA2610-AGN Manuel utilisateur

H3C

H3C WA6330 Manuel utilisateur

H3C

H3C WA2210-AG Manuel utilisateur

H3C

H3C WA3610i-GN Manuel utilisateur

H3C

H3C WA2110-AG Manuel utilisateur

H3C

H3C WA2600 Series Manuel utilisateur

H3C

H3C WA6628E-T Manuel utilisateur

H3C

H3C WA4320H-ACN Manuel utilisateur

H3C

H3C WA6020 Manuel utilisateur

H3C

H3C WA530 Manuel utilisateur

H3C

H3C WA4600 Series Manuel utilisateur

H3C

H3C WX6600 Series Manuel utilisateur

H3C

H3C WA2620X-AGNP Manuel utilisateur

H3C

H3C WA2612-AGN Manuel utilisateur

H3C

H3C WA2620-AGN Manuel utilisateur

H3C

H3C WA6500 Series Guide de l'utilisateur

H3C

H3C WA5300 Series Mode d’emploi

H3C

H3C WA2210-AG_INDOORSINGLEBANDAP Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur