H3C WA510H Manuel utilisateur

H3C WA510H Access Point

Installation Guide

New H3C Technologies Co., Ltd.

http://www.h3c.com

Document version: 6W101-20190527

No part of this manual may be reproduced or transmitted in any form or by any means without prior written

consent of New H3C Technologies Co., Ltd.

Trademarks

Except for the trademarks of New H3C Technologies Co., Ltd., any trademarks that may be mentioned in this

document are the property of their respective owners.

Notice

The information in this document is subject to change without notice. All contents in this document, including

statements, information, and recommendations, are believed to be accurate, but they are presented without

warranty of any kind, express or implied. H3C shall not be liable for technical or editorial errors or omissions

contained herein.

Environmental protection

This product has been designed to comply with the environmental protection requirements. The storage, use,

and disposal of this product must meet the applicable national laws and regulations.

Preface

This installation guide describes the installation procedure for the H3C WA510H Access Point.

This preface includes the following topics about the documentation:

•Audience.

•Conventions.

•Documentation feedback.

Audience

This documentation is intended for:

•Network planners.

•Field technical support and servicing engineers.

•Network administrators working with the WA510H.

Conventions

The following information describes the conventions used in the documentation.

Command conventions

Convention Description

Boldface Bold text represents commands and keywords that you enter literally as shown.

Italic Italic text represents arguments that you replace with actual values.

[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.

{ x | y | ... }

Braces enclose a set of required syntax choices separated by vertical bars, from which

you select one.

[ x | y | ... ]

Square brackets enclose a set of optional syntax choices separated by vertical bars,

from which you select one or none.

{ x | y | ... } *

Asterisk marked braces enclose a set of required syntax choices separated by vertical

bars, from which you select a minimum of one.

[ x | y | ... ] *

Asterisk marked square brackets enclose optional syntax choices separated by vertical

bars, from which you select one choice, multiple choices, or none.

&<1-n> The argument or keyword and argument combination before the ampersand (&) sign

can be entered 1 to n times.

# A line that starts with a pound (#) sign is comments.

GUI conventions

Convention Description

Boldface Window names, button names, field names, and menu items are in Boldface. For

example, the New User window opens; click OK.

> Multi-level menus are separated by angle brackets. For example, File > Create >

Folder.

Symbols

Convention Description

WARNING! An alert that calls attention to important information that if not understood or followed

can result in personal injury.

CAUTION: An alert that calls attention to important information that if not understood or followed

can result in data loss, data corruption, or damage to hardware or software.

IMPORTANT: An alert that calls attention to essential information.

NOTE: An alert that contains additional or supplementary information.

TIP: An alert that provides helpful information.

Network topology icons

Convention Description

Represents a generic network device, such as a router, switch, or firewall.

Represents a routing-capable device, such as a router or Layer 3 switch.

Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that

supports Layer 2 forwarding and other Layer 2 features.

Represents an access controller, a unified wired-WLAN module, or the access

controller engine on a unified wired-WLAN switch.

Represents an access point.

Represents a wireless terminator unit.

Represents a wireless terminator.

Represents a mesh access point.

Represents omnidirectional signals.

Represents directional signals.

Represents a security product, such as a firewall, UTM, multiservice security

gateway, or load balancing device.

Represents a security module, such as a firewall, load balancing, NetStream, SSL

VPN, IPS, or ACG module.

Examples provided in this document

Examples in this document might use devices that differ from your device in hardware model,

configuration, or software version. It is normal that the port numbers, sample output, screenshots,

and other information in the examples differ from what you have on your device.



Documentation feedback

You can e-mail your comments about product documentation to info@h3c.com.

We appreciate your comments.

Contents

Preparing for installation····································································1

Safety recommendations·············································································································1

Temperature and humidity requirements·························································································1

Accessories provided with the AP··································································································1

Installation tools and equipment····································································································2

Installing the AP···············································································3

Check before installation ·············································································································3

Installing the AP ························································································································3

Attaching the mounting bracket to an electrical outlet box ····························································3

Connecting cables···············································································································4

Installing the AP··················································································································5

Connecting the AP to the power supply ··························································································6

Check before power-on ········································································································6

Connecting the PoE power supply ··························································································6

Connecting the local power supply··························································································7

PoE injector power supply·····································································································8

Check after power-on···········································································································8

Connecting the AP to the network··································································································8

Appendix A Technical specifications···················································10

Appendix B LEDs and ports······························································11

LEDs·····································································································································11

Ports·····································································································································12

Preparing for installation

Safety recommendations

WARNING!

Only qualified personnel can install and remove the AP and its accessories. You must read all safety

instructions supplied with the AP before installation and operation.

•Take adequate safety measures to avoid injury andAP damage.

•Place the AP in a dry and flat location and take anti-slip measures.

•Keep the AP clean and dust-free.

•Do not place the AP in a moist area and avoid any liquid intrusion.

•Keep the AP and installation tools away from walkways.

Temperature and humidity requirements

Item Specification

Operating temperature 0°C to +40°C (32°F to 104°F)

Storage temperature –40°C to +70°C (–40°F to +158°F)

Operating humidity (noncondensing) 5% to 95% RH

Accessories provided with the AP

× 2 × 1

M3.5 × 25 screw M2.9 × 4 security screw Mounting bracket

Installation tools and equipment

When installing the AP, you might need the following tools. Prepare these tools and equipment

yourself.

Phillips screwdriver Needle-nose pliers Wire-stripping pliers

Torx screwdriver Wire crimper

Installing the AP

Figure 1 Installation flowchart

Check before installation

Before installing anAP, perform the following tasks:

•Connect the AP to the power supply and the network. Examine the LEDs to verify that the AP

can operate correctly. For more information aboutAP LEDs, see "Appendix B LEDs and ports."

•Record the AP MAC address and serial number marked on the rear of theAP for future use.

Installing the AP

Attaching the mounting bracket to an electrical outlet box

As shown in Figure 2, use the M4 screws to attach the mounting bracket to an electrical outlet box.

Figure 2 Attaching the mounting bracket to an electrical outlet box

Connecting cables

Connect the network cable from the box to the Uplink/PoE In port on the rear of the AP. Connect a

cable to the Pass Through port on the rear of the AP as required.

NOTE:

The Pass Through ports on the rear and right side of the AP are standard RJ-45 ports. You can

connect telephone cables or other cables to them as needed.

Figure 3 Connecting cables

Table des matières

Autres manuels H3C Point d'accès sans fil

H3C

H3C WA4330-ACN Manuel utilisateur

H3C

H3C WA6120 Manuel utilisateur

H3C

H3C WA Series Manuel d'installation

H3C

H3C WA6320H Manuel utilisateur

H3C

H3C WA530X Manuel utilisateur

H3C

H3C WA6628E-T Manuel utilisateur

H3C

H3C WA4320i-ACN Manuel utilisateur

H3C

H3C WA2620-AGN Manuel utilisateur

H3C

H3C WA2620-AGN Manuel utilisateur

H3C

H3C WA2600 Series Manuel utilisateur

H3C

H3C WA2610i-GN Manuel utilisateur

H3C

H3C WA2200 Series Manuel utilisateur

H3C

H3C WA6628 Manuel utilisateur

H3C

H3C WA6528X-E Manuel utilisateur

H3C

H3C WA6320 Manuel utilisateur

H3C

H3C WA3610i-GN Manuel utilisateur

H3C

H3C WA6600 Series Mode d’emploi

H3C

H3C WA6520H Manuel utilisateur

H3C

H3C WA5320X Manuel utilisateur

H3C

H3C WA Series Manuel utilisateur

H3C

H3C WA2610-AGN Manuel utilisateur

H3C

H3C WA2110-AG Manuel utilisateur

H3C

H3C WA6500 Series Guide de l'utilisateur

H3C

H3C WA6320H-HI Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur