H3C WA2610E-AGN Manuel utilisateur

H3C WA2600 Series WLAN Access Points

Installation Manual

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

Manual Version: 5PW100-20081111

licensors

No part of this manual may be reproduced or transmitted in any form

or by any means without prior written consent of Hangzhou H3C

Technologies Co., Ltd.

Trademarks

H3C, , Aolynk, , H3Care,

, TOP G, ,

IRF, NetPilot, Neocean, NeoVTL, SecPro, SecPoint, SecEngine,

SecPath, Comware, Secware, Storware, NQA, VVG, V2G, VnG,

PSPT, XGbus, N-Bus, TiGem, InnoVision and HUASAN are

trademarks of Hangzhou H3C Technologies Co., Ltd.

All other trademarks that may be mentioned in this manual are the

property of their respective owners.

Notice

The information in this document is subject to change without notice.

Every effort has been made in the preparation of this document to

ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute the warranty of

any kind, express or implied.

Technical Support

customer_service@h3c.com

http://www.h3c.com

About This Manual

Organization

H3C WA2600 Series WLAN Access Points Installation Manual is

organized as follows:

Chapter Contents

1 Product Overview Introduces the hardware configurations,

appearance, and interfaces of the H3C

WA2600 Series WLAN Access Points.

2 Preparing for

Installation

Specifies the environmental requirements

for installing the H3C WA2600 Series

WLAN Access Points, presents installation

precautions, and introduces the installation

tools needed.

3 Installing the AP

Introduces how to install the H3C WA2600

Series WLAN Access Points and how to

connect the power supply units and the

Ethernet cable.

Conventions

The manual uses the following conventions:

Symbols

Convention Description

Means reader be extremely careful. Improper

operation may cause bodily injury.

Means reader be careful. Improper operation

may cause data loss or damage to equipment.

Convention Description

Means a complementary description.

Obtaining Documentation

You can access the most up-to-date H3C product documentation on

the World Wide Web at this URL: http://www.h3c.com.

The following are the columns from which you can obtain different

categories of product documentation:

[Products & Solutions]: Provides information about products and

technologies.

[Technical Support & Document > Technical Documents]: Provides

several categories of product documentation, such as installation,

operation, and maintenance.

Documentation Feedback

You can e-mail your comments about product documentation to

[email protected].

We appreciate your comments.

Environmental Protection

This product has been designed to comply with the requirements on

environmental protection. For the proper storage, use and disposal of

this product, national laws and regulations must be observed.

Table of Contents

1 Product Overview .................................................................................1-1

Introduction.........................................................................................1-1

Hardware Configuration.....................................................................1-2

LEDs...........................................................................................1-3

Interfaces....................................................................................1-5

2 Preparing for Installation.....................................................................2-1

Unpacking and Inspection..................................................................2-1

Preparing Installation Tools................................................................2-2

Examining the Installation Site...........................................................2-3

Installation Site Selection ...........................................................2-3

Temperature and Humidity Requirements .................................2-3

Power Supply..............................................................................2-4

Grounding and Lightning Protection...........................................2-5

3 Installing the AP....................................................................................3-1

Installation Flowchart .........................................................................3-1

Determining the Installation Position..................................................3-1

Installing the AP on a Wall.................................................................3-2

Installing the Wall-Mounting Bracket on the Wall.......................3-2

Installing the AP on the Wall-Mounting Bracket.........................3-5

Locking the AP onto the Wall-Mounting Bracket (Optional).......3-6

Connecting the Power Supply............................................................3-8

Local Power Supply....................................................................3-8

Power over Ethernet...................................................................3-8

Connecting the AP to the Network.....................................................3-9

List of Figures

Figure 1-1 Typical networking using the WA2600 series ..................1-1

Figure 1-2 Appearance of the WA2600 series ..................................1-2

Figure 1-3 LEDs on the H3C WA2610E-AGN...................................1-3

Figure 1-4 LEDs on the H3C WA2620E-AGN...................................1-3

Figure 1-5 Interfaces on the H3C WA2610E-AGN............................1-6

Figure 1-6 Interfaces on the H3C WA2620E-AGN............................1-7

Figure 3-1 Installation flowchart ........................................................3-1

Figure 3-2 Screw hole locations and screw hole size.......................3-3

Figure 3-3 Install the wall-mounting bracket .....................................3-4

Figure 3-4 Fix the AP onto the wall-mounting bracket ......................3-6

Figure 3-5 Lock the AP onto the wall-mounting bracket....................3-7

Figure 3-6 Local power supply connection........................................3-8

Figure 3-7 PoE connection................................................................3-8

Figure 3-8 Connect the AP to the network ........................................3-9

iii

List of Tables

Table 1-1 Physical dimensions and weight of the WA2600 series......1-2

Table 1-2 Supported protocols and chassis material.........................1-2

Table 1-3 Description of the LEDs on the WA2610E-AGN and

WA2620E-AGN...........................................................................1-4

Table 1-4 Descriptions of interfaces on the WA2600 series WLAN

access points..............................................................................1-8

Table 2-1 List of articles in the package ............................................2-1

Table 2-2 List of installation tools.......................................................2-2

Table 2-3 Environment specifications................................................2-3

Table 2-4 Nominal voltage and frequency of the low-voltage AC power

supply .........................................................................................2-4

Table 2-5 Grounding and lightning protection requirements..............2-5

1-1

1 Product Overview

Introduction

The H3C WA2600 Series WLAN Access Points (hereinafter referred

to as the WA2600 series) are one of the 802.11n access point (AP)

product series developed by Hangzhou H3C Technologies Co., Ltd.

(hereinafter referred to as H3C). The WA2600 series can serve as FIT

APs to cooperate with wireless local area network (WLAN) switches

or access controllers to provide wireless access for WLAN users.

Figure 1-1 shows a typical scenario of hotspot deployments using the

WA2600 series.

Figure 1-1 Typical networking using the WA2600 series

Figure 1-2 shows the appearance of the WA2600 series.

1-2

Figure 1-2 Appearance of the WA2600 series

Table 1-1 Physical dimensions and weight of the WA2600 series

Model Physical dimensions

(H×W×D) Weight

H3C

WA2610E-AGN 35 × 210 × 150 mm

(1.38 × 8.27 × 5.91 in.) 1.2 kg (2.65 lb.)

H3C

WA2620E-AGN 35 × 210 × 150 mm

(1.38 × 8.27 × 5.91 in.) 1.3 kg (2.87 lb.)

Hardware Configuration

The two models of the WA2600 series have different radio

frequencies (RFs) and structures. Table 1-2 lists the supported

protocols and the chassis material.

Table 1-2 Supported protocols and chassis material

Model Protocols and chassis material

H3C WA2610E-AGN IEEE 802.11a/b/g/n, single-RF, sheet

metal

1-3

Model Protocols and chassis material

H3C WA2620E-AGN IEEE 802.11a/b/g/n, dual-RF, sheet

metal

The following describes the hardware configurations and functions of

the WA2600 series in detail.

LEDs

The positions and identifications of LEDs on the panel vary with the

models. For details about these LEDs, see Table 1-3.

H3C WA2610E-AGN

Figure 1-3 LEDs on the H3C WA2610E-AGN

H3C WA2620E-AGN

Figure 1-4 LEDs on the H3C WA2620E-AGN

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels H3C Point d'accès sans fil

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur