H3C S5500-EI series Instructions d'installation

H3C S5500-EI Series Ethernet Switches

Command Manual

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

Manual Version: 20071120-C-1.01

Product Version: Release 2102

No part of this manual may be reproduced or transmitted in any form or by any means

without prior written consent of Hangzhou H3C Technologies Co., Ltd.

Trademarks

H3C, , Aolynk, , H3Care,

, TOP G, , IRF, NetPilot,

Neocean, NeoVTL, SecPro, SecPoint, SecEngine, SecPath, Comware, Secware,

Storware, NQA, VVG, V2G, VnG, PSPT, XGbus, N-Bus, TiGem, InnoVision and

HUASAN are trademarks of Hangzhou H3C Technologies Co., Ltd.

All other trademarks that may be mentioned in this manual are the property of their

respective owners.

Notice

The information in this document is subject to change without notice. Every effort has

been made in the preparation of this document to ensure accuracy of the contents, but

all statements, information, and recommendations in this document do not constitute

the warranty of any kind, express or implied.

To obtain the latest information, please access:

http://www. h3c.com

Technical Support

customer_service@h3c.com

http://www. h3c.com

About This Manual

Related Documentation

In addition to this manual, each H3C S5500-EI Series Ethernet Switches

documentation set includes the following:

Manual Description

H3C S5500-EI Series Ethernet

Switches Installation Manual It provides information for the system

installation.

H3C S5500-EI Series Ethernet

Switches Operation Manual It is used for assisting the users in data

configurations and typical applications.

Organization

H3C S5500-EI Series Ethernet Switches Command Manual is organized as follows:

Part Contents

1 Login Introduces the commands used for logging into the

Ethernet switch.

2 VLAN Introduces the commands used for configuring VLAN,

Voice VLAN, and GVRP.

3 IP Addressing and

Performance Introduces the commands used for configuring IP

address and IP performance.

4 QinQ-BPDU Tunneling Introduces the commands used for configuring QinQ

and BPDU Tunneling.

5 Port Correlation

Configuration Introduces the commands used for basic port

configuration and port isolation configuration.

6 Link Aggregation Introduces the commands used for link aggregation.

7 MAC Address Table

Management Introduces the commands used for configuring MAC

address forwarding table.

8 IP Source Guard Introduces the commands used for configuring MAC

address, IP address and port binding.

9 DLDP Introduces the commands used for DLDP and the

related configuration.

10 MSTP Introduces the commands used for configuring STP

and BRDU tunnel.

11 IP Routing-GR

Overview Introduces the commands used for displaying IP

routing tables.

Part Contents

12 IPv4 Routing Introduces the commands used for configuring IPv4

routing, static routing, RIP, OSPF, IS-IS, BGP, and

route policy.

13 IPv6 Routing Introduces the commands used for configuring IPv6

routing, static routing, RIPng, OSPFv3, IS-ISv6, and

BGP4+.

14 IPv6 Introduces the commands used for configuring IPv6

application, IPv6 tunneling, and so on.

15 Multicast Introduces the commands used for configuring IGMP

Snooping, MLD Snooping, multicast VLAN, multicast

policy, IGMP, PIM-DM, PIM-SM, and MSDP.

16 802.1x-HABP-MAC

Authentication

Introduces the commands used for 802.1x，HABP

and MAC address authentication related

configurations.

17 AAA RADIUS

HWTACACS Introduces the commands used for AAA, RADIUS,

HWTACACS, and the related configurations.

18 ARP Introduces the commands used for ARP and the

related configuration.

19 DHCP Introduces the commands used for DHCP and the

related configuration.

20 ACL Introduces the commands used for IPv4&IPv6-based

ACL and the related configuration.

21 QoS Introduces the commands used for QoS and the

related configuration.

22 Port Mirroring Introduces the commands used for port mirroring and

the related configuration.

23 Cluster Management Introduces the commands used for Cluster and the

related configuration.

24 UDP Helper Introduces the commands used for UDP Helper and

the related configuration.

25 SNMP-RMON Introduces the commands used for the configuration

to manage network devices through SNMP and

RMON.

26 NTP Introduces the commands used for NTP and the

related configuration.

27 DNS Introduces the commands used for DNS and the

related configuration.

28 File System

Management Introduces the commands used for file system

management.

29 Information Center Introduces the commands used for the configuration

to analyze and diagnose networks using the

information center.

Part Contents

30 System Maintaining

and Debugging Introduces the commands used for daily system

maintenance and debugging.

31 NQA Introduces the commands used for NQA and the

related configuration.

32 VRRP Introduces the commands used for VRRP and the

related configuration.

33 SSH Introduces the commands used for SSH and the

related configuration.

34 RRPP Introduces the commands used for RRPP and the

related configuration.

35 Port Security Introduces the commands used for Port Security and

the related configuration.

36 LLDP Introduces the commands used for LLDP and the

related configuration.

37 PoE Introduces the commands used for PoE.

38 sFlow Introduces the commands used for sFlow and the

related configuration.

39 SSL-HTTPS Introduces the commands used for SSL，HTTPS and

the related configuration.

40 PKI Introduces the commands used for PKI and the

related configuration.

41 Track Introduces the commands used for Track and the

related configuration.

42 Appendix Lists all the commands described in this command

manual in an alphabetic order. The parts and pages

where the commands are described are also given.

Conventions

The manual uses the following conventions:

I. Command conventions

Convention Description

Boldface The keywords of a command line are in Boldface.

italic Command arguments are in italic.

[ ] Items (keywords or arguments) in square brackets [ ] are

optional.

{ x | y | ... }

Alternative items are grouped in braces and separated by

vertical bars. One is selected.

Convention Description

[ x | y | ... ]

Optional alternative items are grouped in square brackets

and separated by vertical bars. One or none is selected.

{ x | y | ... } *

Alternative items are grouped in braces and separated by

vertical bars. A minimum of one or a maximum of all can be

selected.

[ x | y | ... ] *

Optional alternative items are grouped in square brackets

and separated by vertical bars. Many or none can be

selected.

&<1-n> The argument(s) before the ampersand (&) sign can be

entered 1 to n times.

# A line starting with the # sign is comments.

II. Symbols

Convention Description

Warning Means reader be extremely careful. Improper operation

may cause bodily injury.

Caution Means reader be careful. Improper operation may cause

data loss or damage to equipment.

Note Means a complementary description.

Autres manuels pour S5500-EI series

Table des matières

Autres manuels H3C Changer

H3C

H3C S7500 Series Manuel utilisateur

H3C

H3C S6116 Series Manuel utilisateur

H3C

H3C WX3000 Series Manuel utilisateur

H3C

H3C S5120-EI Series Manuel utilisateur

H3C

H3C S6800 Series Manuel utilisateur

H3C

H3C S5510 Series Manuel utilisateur

H3C

H3C S7500X Series Manuel utilisateur

H3C

H3C S12500-X Manuel utilisateur

H3C

H3C S5120-EI Series Manuel d'installation

H3C

H3C S6520-EI Series Manuel utilisateur

H3C

H3C S9500E Series Manuel utilisateur

H3C

H3C S9500E Series Manuel utilisateur

H3C

H3C S5500-HI Switch Series Manuel d'installation

H3C

H3C S12500 Series Manuel utilisateur

H3C

H3C S5120-9P-SI Manuel utilisateur

H3C

H3C S6890-54HF Manuel d'utilisation et d'entretien

H3C

H3C 6W101 Manuel d'utilisation et d'entretien

H3C

H3C S9500 Series Manuel utilisateur

H3C

H3C S6520X-EI Series Manuel utilisateur

H3C

H3C S9500 Series Manuel utilisateur

H3C

H3C S6800 Series Manuel d'installation

H3C

H3C S12500X-2L Mode d'emploi

H3C

H3C S9500 Series Manuel utilisateur

H3C

H3C S3100-52P Instructions d'installation

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur