H3C S1526 Manuel utilisateur
H3C S1526 Smart Ethernet Switch
User Manual
Hangzhou H3C Technologies Co., Ltd.
http://www.h3c.com
Manual Version: T2-UM-20070516-3.02
Copyright © 2005-2007, Hangzhou H3C Technologies Co.,
Ltd.
All Rights Reserved
No part of this manual may be reproduced or transmitted in any form
or by any means without prior written consent of Hangzhou H3C
Technologies Co., Ltd.
Trademarks
H3C, , Aolynk, , H3Care,
, TOP G, , IRF,
NetPilot, Neocean, NeoVTL, SecPro, SecPoint, SecEngine, SecPath,
Comware, Secware, Storware, NQA, VVG, V2G, VnG, PSPT, XGbus,
N-Bus, TiGem, InnoVision and HUASAN are trademarks of Hangzhou
H3C Technologies Co., Ltd.
All other trademarks that may be mentioned in this manual are the
property of their respective owners.
CE
This equipment complies with the following European Directives:
89/336/EEC (electromagnetic compatibility), 73/23/EEC (low voltage).
Notice
The information in this document is subject to change without notice.
Every effort has been made in the preparation of this document to
ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of
any kind, express or implied.
To obtain the latest information, please access:
http://www.h3c.com
Technical Support
soho@h3c.com
http://www.h3c.com
About This Manual
Purpose
This document is used to guide you through configuring, using and
managing this product. Please read it carefully before your operation.
Intended Audience
This document is intended for network administrators who know well
of the basic network knowledge and network terms.
Organization
This document is organized as follows:
Chapter Content
1 Product
Overview
This chapter describes the main features of the
H3C S1526 Smart Ethernet Switch (hereinafter
referred to as the S1526).
2 Web-based
Configuration This chapter describes how to configure and
manage the S1526 through the Web.
3 Configuration
Through
Console Port
This chapter describes how to configure and
manage the S1526 through the command line
interface.
4 Typical
Configuration This chapter describes a typical network
configuration example of the S1526.
Chapter Content
5 Appendix –
TCP/IP
Installation
This chapter describes how to install the TCP/IP
protocol on your computer.
6 Appendix – IP
Address
Configuration
This chapter describes how to configure an IP
address on your computer.
Conventions
The manual uses the following conventions:
I. GUI conventions
Convention Description
Boldface
Window names, button names, field
names, and menu items are in Boldface.
For example, the New User window
appears; click OK.
> Multi-level menus are separated by angle
brackets. For example, File > Create >
Folder.
Convention Description
< > Button names are inside angle brackets.
For example, For example, click <OK>.
[ ]
Window names, menu items, data table
and field names are inside square
brackets. For example, pop up the [New
User] window.
Convention Description
/ Multi-level menus are separated by forward
slashes. For example, [File/Create/Folder].
Symbols
II.
Convention Description
Caution
Means reader be careful. Improper
operation may cause data loss or damage
to equipment.
Note Means a complementary description.
User Manual
H3C S1526 Smart Ethernet Switch Table of Contents
i
Table of Contents
Chapter 1 Product Overview..........................................1-1
1.1 Introduction.........................................................1-1
1.2 Features .............................................................1-1
Chapter 2 Web-based Configuration .............................2-1
2.1 Prerequisites.......................................................2-1
2.2 Basic Configuration .............................................2-2
2.2.1 Logging in to Web NMS ..............................2-2
2.2.2 Configuration Page Introduction .................2-3
2.2.3 Title Item Description .................................2-3
2.2.4 Button Description......................................2-6
2.2.5 User Session Timeout ................................2-7
2.3 Save Configuration..............................................2-7
2.4 System ...............................................................2-8
2.4.1 System Setting...........................................2-8
2.4.2 Password...................................................2-9
2.4.3 Restore Default........................................2-10
2.4.4 Reboot.....................................................2-11
2.4.5 Upgrade...................................................2-12
2.5 Port ..................................................................2-14
2.5.1 Port Setting .............................................2-14
2.5.2 Trunk.......................................................2-17
2.5.3 Port Mirroring...........................................2-20
2.5.4 Statistics..................................................2-22
2.5.5 Rate Limit ................................................2-26
User Manual
H3C S1526 Smart Ethernet Switch Table of Contents
ii
2.5.6 Broadcast Storm Control ..........................2-28
2.6 VLAN ................................................................2-29
2.6.1 VLAN Types.............................................2-29
2.6.2 802.1Q VLAN ...........................................2-30
2.6.3 Port-based VLAN .....................................2-37
2.7 QoS ..................................................................2-41
2.7.1 QoS Introduction ......................................2-41
2.7.2 QoS Configuration....................................2-41
2.8 Cable Diagnostics .............................................2-42
2.9 Logout ..............................................................2-44
Chapter 3 Configuration Through Console Port............3-1
3.1 Building Configuration Environment Through Console
Port ..........................................................................3-1
3.2 User Configuration ..............................................3-5
3.2.1 Changing Web-based NMS Password .........3-6
3.2.2 Setting IP Addresses..................................3-7
3.2.3 Restoring Factory Default Settings .............3-7
3.2.4 Saving the Current Configuration ................3-8
3.2.5 Configuring the Management VLAN ............3-9
3.2.6 Rebooting the Switch ...............................3-12
Chapter 4 Typical Configuration ...................................4-1
4.1 Network Requirements ........................................4-1
4.2 Networking Diagram ............................................4-3
4.3 Configuration Steps.............................................4-3
Chapter 5 Appendix – TCP/IP Installation .....................5-1
Chapter 6 Appendix – IP Address Configuration...........6-1
User Manual
H3C S1526 Smart Ethernet Switch Chapter 1 Product Overview
1-1
Chapter 1 Product Overview
1.1 Introduction
H3C S1526 Smart Ethernet Switch (hereinafter referred to
as the S1526) is suitable for the networking of small and
medium-sized enterprises, Internet cafe and households. It
provides one console port, 24 × 10/100Base-TX autosensing
Ethernet ports and two 1000 Mbps uplink combo ports.
Note:
Port 25 and port 26 are 1000 Mbps uplink combo ports. Each
combo port supports one 10/100/1000Base-T autosensing
Ethernet port and one 1000 Mbps SFP module port, which,
however, cannot work simultaneously. If both are enabled
simultaneously, the SFP module port, which has a higher
priority, will be active, while the 10/100/1000Base-T port will be
inactive.
1.2 Features
The S1526 offers rich features as listed below.
User Manual
H3C S1526 Smart Ethernet Switch Chapter 1 Product Overview
1-2
Table 1-1 S1526 features
Item Description
VLAN (virtual local
area network)
Supports up to 256 IEEE 802.1Q
compliant VLANs
Supports up to 26 port-based
VLANs
Port
All ports support broadcast storm
control
All ports support flow control,
802.3x compliant
Trunk
10/100Base-TX ports: two trunk
groups, up to four ports per group
1000 Mbps ports: one trunk group,
up to two ports
A trunk group cannot contain both
10/100Base-TX and 1000 Mbps
ports
MAC address table
Address auto-learning
MAC address auto-aging time
configurable (300 seconds by
default)
Device management Supports Web-based NMS
Supports basic management
through the console port
QoS (Quality of
Service)
Supports 802.1p priority
Supports four priority queues per
port
Supports WRR queue scheduling
Supports port rate limiting
Port mirroring Supports port-based mirroring
Autres manuels pour S1526
1
Table des matières
Autres manuels H3C Changer
H3C
H3C S9500 Series Manuel utilisateur
H3C
H3C s5820x series Manuel utilisateur
H3C
H3C S5560S-EI Series Manuel utilisateur
H3C
H3C S9810 Manuel utilisateur
H3C
H3C S5130S Series Mode d’emploi
H3C
H3C H3C S7500E Series Manuel utilisateur
H3C
H3C S5820 series Manuel d'installation
H3C
H3C s5820x series Manuel d'installation
H3C
H3C H3C S7500E Series Manuel d'utilisation et d'entretien
H3C
H3C S3100 Series Manuel utilisateur
H3C
H3C s5800 series Manuel utilisateur
H3C
H3C S5120-SI Series Manuel utilisateur
H3C
H3C S12500G-AF Series Manuel utilisateur
H3C
H3C S10500X Series Manuel utilisateur
H3C
H3C S9500 Series Instructions d'installation
H3C
H3C H3C S7500E Series Manuel utilisateur
H3C
H3C H3C S5100-SI Manuel utilisateur
H3C
H3C S9500 Series Manuel utilisateur
H3C
H3C S6520XE-HI Series Manuel utilisateur
H3C
H3C H3C S3600 Series Manuel utilisateur
