GVC KR632 Manuel utilisateur
1
Advanced Pentium II
Motherboard
KR632
USER’S MANUAL
Copyright 1997 GVC CORPORATION. ALL RIGHTS RESERVED.
2
NOTICE
Rights:
No part of this manual, including but not limited to the products and
software described in it, may be reproduced, transmitted, transcribes,
stored in a retrieval system, or translated in any form or by any means
without the expressed written permission of GVC “Corporation or BCM
Advanced Research, Inc.
Products and corporate names appearing in this manual may or may not be
registered trademarks or copyrights of their respective companies and are used
only for identification or explanation purposes without intent to infringe.
¨Intel, MMX and Pentium are registered trademarks of Intel Corporation.
¨IBM and OS/2 are registered trademarks of International Business
Machines.
¨AMI is a registered trade mark of American Megatrends Inc..
¨Winbond is a registered trademark of Winbond Electronics Inc..
Responsibility:
This manual is provided “As is” with no warranties of any kind, either expressed
or implied, including, but not limited to the implied warranties or conditions of
this product’s fitness for any particular purpose. In no event shall we be liable for
any loss of profits, loss of business, loss of data, interruption of business, or
indirect, special, incidental, or consequential damages of any kind, even the
possibility of such damages arising from any defect or error in this manual or
product. We reserve the right to modify and update the user manual without prior
notice.
3
COMPLIANCE & CERTIFICATE
ISO 9001 Certificate: This device was produced in our plant with advanced quality
system certified by DNV QA Ltd. in according to ISO 9001.
This Certificate is valid for :
DESIGN & MANUFACTURE OF MOTHER BOARDS
AND PERSONAL COMPUTERS.
CE Declaration:
CE marking is a visible declaration by the manufacturer or
his authorized representatives that the electrical equipment to
which it relates satisfies all the provisions of the 1994
Regulations.
FCC Compliance: FCC stands for Federal Communications Commission.
This product complies with FCC Rules Part 15 and has
been tested, and complied with the EMI rules by a certified
body. In normal operation, there shall be no harmful
interference caused by this device nor shall this devise
accept any interference received, including interference that
may cause undesired operation of this product.
Microsoft Windows Compliance:
Microsoft, Windows NT, Windows, and the Windows Logo are
registered trademarks of Microsoft Corporation.
4
EASY INSTALLATION
The following “Easy Installation” steps are for
users accustomed to the assembly of a
computer system. For those individuals
requiring more specific information please
refer to the more detailed descriptions located
within the latter chapters of this manual. Note:
You must keep your power cable unplugged
until the following installation steps are
completed.
Getting Start:
Touch a grounded metal surface to release static electricity
stored in your body before unpacking your motherboard. For
details please refer to Precaution section in Chapter 3.
Install the CPU by correctly aligning the CPU with the Slot 1
as noted in the motherboard diagram. Once aligned, press
down on the CPU gently but firmly. Next, install either the
3.3 volt unbuffered EDO or SDRAM into the 168 pin
DIMMs. See Sec. 3.2 & Sec. 3.3.
After completing the above steps, install any expansion
cards into the appropriate PCI, ISA or AGP slots and screw
them tight to the chassis. See Sec. 3.4.
Plug in all cables included in the package except for the
power cord. Please see Sec. 3.5.
Please rechecked all steps to ensure no mistakes
have been made and then plug in the power cord
and turn on the power to enter the BIOS setup, Chapter 4.
EASY INSTALLATION
Release
Static Electricity
Couple
Connectors Of
HDD, FDD…
Install All
Expansion Slots
Insert CPU &
RAM
5
CONTENTS
6
1. INTRODUCTION
How To Use This Manual Page8
Check Your Device Items Page8
2. FEATURES
Photo Of The Motherboard Page9
Features Of The Motherboard Page10
3. INSTALLATION
Motherboard Layout & Main Parts Page12
Significant Parts List Page13
Precaution Before Start Page14
3.1 Slots And Connectors Page15
3.2 CPU Page16
3.3 System Memory ( DRAM ) Page18
3.3.1 DIMM (Dual Inline Memory Module)
3.3.2 Installation Procedure
3.3.3 DIMM Combinations
3.4 Expansion Slots Page20
3.5 Connectors Page21
3.5.1 Primary IDE Connector
3.5.2 Secondary IDE Connector
3.5.3 Floppy Drive Connector
CONTENTS
3.5.1 Power Input Connector
3.5.2 Front Panel Connectors
3.5.3 Back Panel Connectors
3.5.4 Additional Connectors
7
Ready To Turn On Power Page29
4. BIOS SETUP
4.1 How To Enter BIOS Setup Page31
4.1.1 Setup Keys
4.1.2 In Case Of Problem
4.2 BIOS Setup Main Menu Page33
4.2.1 MAIN MENU > STANDARD CMOS SETUP
4.2.2 MAIN MENU > ADVANCED CMOS SETUP
4.2.3 MAIN MENU > ADVANCED CHIPSET SETUP
4.2.4 MAIN MENU > POWER MANAGEMENT SETUP
4.2.5 MAIN MENU > PCI/PLUG AND PLAY SETUP
4.2.6 MAIN MENU > PERIPHERAL SETUP
4.2.7 MAIN MENU > CPU SPEED SETUP
4.2.8 MAIN MENU > AUTO-DETECT HARD DISKS
4.2.9 MAIN MENU > CHANGE SUPERVISOR PASSWORD
4.2.10 MAIN MENU > AUTO CONFIGURATION WITH OPTIMAL
SETTING
4.2.11 MAIN MENU > SAVE SETTINGS AND EXIT
4.2.12 MAIN MENU > EXIT WITHOUT SAVING
TECHNICAL SUPPORT Page55
1. INTRODUCTION
8
How To Use This Manual
This manual provides information
necessary for Original Equipment
Manufactures (OEMs) and home users to
build a PC-AT compatible system using
the Pentium II AGP/PCI motherboard.
Just follow the installation procedure
presented on the EASY INSTALLATION Page and refer to the section
number following each step if you require more detailed instructions.
Check Your Device Items
The standard package should contain
following items marked with a “ü”, If
you find any these items missing or
damaged. Please contact your retailer.
þThe KR632 motherboard
þRetention Mechanism
þ1 IDE ribbon cable
þ1 floppy ribbon cable
þ1 CD-ROM Diskette with system Hardware Monitor and PIIX4 Bus
Master Driver inside or 1 Floppy Diskette with only PIIX4 bus
Master Driver.
oInfrared (IrDA) module with ribbon cable (optional)
oPentium II Retention Mechanism (optional)
2. FEATURES
9
Photo Of The Motherboard
2. FEATURES
10
Features Of The Motherboard
The KR632 motherboard integrates the Pentium II
microprocessor, memory, I/O and AGP (Accelerated
Graphics Port) and is designed to fit into a standard
ATX form factor chassis. Page 12 illustrate the Layout
for the KR632 motherboard. Below lists the key
features provided by this motherboard:
Processor(+Cache)
lSingle slot-1 for PentiumII processor
lSupports Pentium II processor speeds (233-333MHz)
l512KB second-level cache integrated into the Single Edge PentiumII Contact cartridge
Jumperless Design
lUsing the onboard BIOS, jumpers settings are no longer needed.
Chipset
l82440LX AGP/PCI/ISA Chipset.
System Memory
lThree 168-pin DIMM sockets
lMinimum 8MB up to maximum 384 MB of unbuffered SDRAM or EDO RAM
lECC (Error Checking & Correction) or non-ECC memory support
Graphics Support
lSupports AGP (Accelerated Graphics Port) for increased performance of Graphic
Displays, special 3D operations in multimedia, and higher speed to satisfy the users
optical vision.
lAGP Interface supports data transfers at 66 MHz (1x) or 133 MHz (2X) with full
side-band signals.
PCI Bus Master IDE Controller
lIntegrated PCI Bus Master IDE Controller Chip with Ultra-DMA33 capabilities. Up to
four IDE devices can be supported using the two onboard IDE connectors. Also supported
is PIO Modes 3&4, Bus Master IDE DMA Mode 2 and Enhanced IDE devices such as
Tape Backup machines and CD-ROMs. Either the 5.25 inch or 3.5 inch (1.44MB or
2.88MB) floppy drives can be used without requiring an external card. Additionally,
Floppy 3 mode (Japanese standard 3.5 inch disk drive, 1.2MB) and LS-120 floppy disk
drives (3.5 inch disk drive: 120MB, 1.44MB, 720K) are also supported.
2. FEATURES
Table des matières
Autres manuels GVC Carte mère
Manuels Carte mère populaires d'autres marques
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuel utilisateur
Gigabyte
Gigabyte GA-9IVDT Manuel utilisateur
Texas Instruments
Texas Instruments ADS8372EVM Manuel utilisateur
Commell
Commell MS-C73 Manuel utilisateur
IBT Technologies
IBT Technologies MB860 Manuel utilisateur
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur
