1 Introduction BS-01-00-00-00-01-IADE
1.1 Safety instructions BS-01-01-00-00-01-IADE
GUNTAMATIC heating systems represent state-of-the-art
technology and meet all applicable safety regulations.
Incorrect installation can endanger life and limb. Heating
boilers are combustion systems and are potentially dangerous
if handled incorrectly. Installation, commissioning and
servicing must, therefore, only be carried out by adequately
qualified technicians observing all regulations and the
manufacturer's instructions.
1.2 Guarantee and warranty BS-01-02-00-00-01-IADE
The manufacturer's guarantee is subject to correct installation
and commissioning of the heating system. Defects and
damage caused by incorrect installation, commissioning or
operation are not covered by the guarantee. To ensure that
the system functions as intended, the manufacturer's
instructions must be followed. Furthermore, only genuine
replacement parts or parts explicitly approved by the
manufacturer may be fitted to the system.
1.3 Commissioning BS-01-03-00-00-01-IADE
Commissioning of the boiler must be carried out by an
authorised GUNTAMATIC specialist or other qualified
persons. They will check whether the system has been
installed according to the plans, adjust the system settings as
required and explain to the system operator how to use the
heating system.
1.4 Site requirements SY-01-04-00-00-01-IADE
When establishing the site requirements, it is absolutely
essential to take account of the locally applicable planning,
building and implementation regulations and the dimensional
specifications in the fitting guidelines, installation examples
and technical data. Compliance with the locally applicable
regulations and the correct implementation of the measures
required on site are solely the responsibility of the system
owner and are a requirement of the manufacturer's guarantee.
GUNTAMATIC provides no guarantee of any kind for any type
of site work.
