Grundig UMS 25 Manuel utilisateur

MICRO-SYSTEM

UMS 25

ENGLISH

72010-760.9400

CONTENTS________________________________________________________________________

3 Set-up and safety

4 Overview

Operating elements of the stereo system

The back of the stereo system

Remote control

9 Connection and preparation for use

12 Settings

Setting the time

Settings to radio stations

15 General functions

17 Tuner mode

20 CD mode

Basic functions of CD mode

Special features of CD mode

Playback of titles in a selected order – creating a music programme

25 Tape mode

General information about tape mode

Playback, recording

Faster tape forward/rewind

30 Timer mode

32 Information

Cleaning the tape drive

Technical data

GRUNDIG customer service locations

ENGLISH

SET-UP AND SAFETY ______________________________________________

In order that this quality, easy-to-use stereo system continues to provide you

with satisfaction and entertainment, please observe the following when setting it

up:

This stereo system is designed for the playback of audio signals.

Any other use is expressly prohibited.

Please note when setting up the stereo system, that furniture surfaces are

covered by various types of lacquer and plastic, most of which contain chemical

additives. These additives can, among other things, corrode the material of the

device stands, resulting in residues on the furniture surfaces which are difficult

or impossible to remove.

When the stereo system is subject to extreme variation in temperature,

for example during transportation from a cold area to a warm one, connect the

mains supply and let it stand for at least two hours without an inserted CD or

tape.

The stereo system is designed for use in dry rooms. If, however, you use it in the

open, ensure without fail that it is protected from moisture (rain, lawn

sprinklers).

Do not place the stereo system close to heating units or in direct sunlight. This

will impair cooling.

Do not insert any foreign bodies in the CD or tape compartment of the stereo-

system.

Do not open the stereo system under any circumstances. The manufacturer

accepts no liability for damage arising from improper handling.

Storms present a danger to all electrical devices. Even if the stereo system is

switched off, it can be damaged by a lightning strike to the mains and/or the

aerial cable. Always remove the mains plug before an electrical storm.

If the stereo system cannot scan CD’s perfectly, use a commercially available

cleaning CD to clean the laser optics. Other cleaning methods may damage the

laser optics.

Always keep the CD compartment closed to prevent dust from collecting on the

laser optics.

CD OPEN/CLOSE

PHONES

CLOCK TIMER

MEMORY

EJECT

TUNER/BAND

SOURCE

RDS MODE

SURROUND

UBS

SOUND PRESETS

75Ω

LOOP

EXT.ANT

SPEAKERS

4ΩMIN

VIDEO

(AUDIO)

CD OPEN/CLOSE

OPTICAL OUT

CD OPEN/CLOSE

PHONES

CLOCKTIMER

MEMORY

UMS25

REMOTECONTROLLED HIFI STEREO MICRO SYSTEM

AUTO REVERSE

EJECT

TUNER/BAND

SOURCE

RDSMODE

SURROUND

UBS

SOUNDPRESETS

! SERVICE !! SERVICE !! SERVICE !

75Ω

LOOP

EXT.ANT

SPEAKERS

4ΩMIN

VIDEO

(AUDIO)

CD OPEN/CLOSE

OPTICAL OUT

°C2h

°C

CDOPEN/CLOSE

CLOCKTIMER

MEMORY

AUTOREVERSE

EJECT

RDSMODE

SURROUND

UBS

SOUNDPRESETS

CDOPEN/CLOSE

PHONES

CLOCKTIMER

MEMORY

UMS25

REMOTECONTROLLED HIFI STEREO MICRO SYSTEM

AUTOREVERSE

EJECT

TUNER/BAND

SOURCE

RDSMODE

SURROUND

UBS

SOUNDPRESETS

Operating elements of the stereo system

CD com- To open press ».CD OPEN/CLOSE«.

partment

88ON Switches the stereo system on and off

again.

Receiver for remote control signals.

SOURCE Selects the programme sources »CD «,

»TAPE «, »TUNER «, »VIDEO:AUX «.

TUNER/BAND Selects the programme source »TUNER«;

selects the frequency ranges »FM«, »MW«,

»LW«.

PHONES Headphone jack, for connecting a stereo

headphone set with a jack plug

(ø 3.5 mm).

The loudspeakers of the stereo system

are automatically switched off.

Display Displays various items of information on

the operating modes »TUNER«, »CD«,

»TAPE« and »VIDEO:AUX«.

eII Selects the programme source »CD «;

starts the playback of a CD; switches to

playback pause.

5aaa In tuner mode: call up the next

sss6 or previous channel position.

In CD mode: for selecting a title; keeping it

pressed down enables you to search for a

particular passage;

In cassette mode: winds the cassette back-

wards or forwards.

OVERVIEW _______________________________________________________________________

PHONES

CLOCK TIMER

MEMORY

CD OPEN/CLOSE

UMS 25

REMOTE CONTROLLED HIFI STEREO MICRO SYSTEM

AUTO REVERSE

EJECT

TUNER/BAND

SOURCE

RDS MODE

SURROUND

UBS

SOUND PRESETS

ENGLISH

OVERVIEW__________________________________________________________________________________

rSelects the programme source »TAPE«;

starts the cassette rewind mode.

FREVERSE In tuner mode: searches the channel

positions according to the programme type

selected.

In cassette mode: chooses the tape travel

direction.

– VOLUME + Adjusts the volume.

PTY SELECT Selects the programme type.

●II Switches to recording pause.

■Ends playback of the CD or cassette.

eSelects the programme source »TAPE«;

starts recording and playback of the

cassette.

CLOCK TIMER For setting the time on the ON/OFF timer

and the sleep timer.

MEMORY For saving various functions.

RDS MODE Calls up the station names, radio text, and

programme type.

UBS For ”boosting” the bass.

SURROUND For selecting surround effects.

SOUND Selects the sound settings »POP«,

PRESETS »ROCK«, »JAZZ«, »CLASSIC«.

.EJECT Opens the tape compartment.

PHONES

CLOCK TIMER

MEMORY

CD OPEN/CLOSE

UMS 25

REMOTE CONTROLLED HIFI STEREO MICRO SYSTEM

AUTO REVERSE

EJECT

TUNER/BAND

SOURCE

RDS MODE

SURROUND

UBS

SOUND PRESETS

OVERVIEW__________________________________________________________________________________

The back of the stereo system

EXT. ANT Aerial terminals for the supplied frame

AM LOOP aerial.

FM 75 ΩAerial jack for the house aerial or the

supplied projection aerial.

OPTICAL OUT Sound signal output for copying a CD onto

a digital recording device.

IN R L VIDEO Audio signal input for an external device.

(AUDIO)

L R SPEAKERS Loudspeaker jacks for supplied

loudspeakers.

4 ΩMIN R = right channel, L = left channel.

ÜÜMains cable.

The stereo system can only be isolated from

the mains by pulling out the mains plug.

General instructions for laser devices

You will find a sign resembling the adjacent illustration on the back of your unit.

CLASS 1 LASER PRODUCT signifies that the laser is safeguarded in such a way that

the maximum allowed radiation value can never be exceeded under any

circumstances.

Caution:

If operation devices or methods other than those specified here are employed, this

may lead to dangerous radiation exposure.

Invisible laser radiation emerges when the CD compartment is opened and when

the safety-lock is bypassed. Do not expose yourself to this radiation.

CLASS 1

LASER PRODUCT

75Ω

LOOP

EXT.ANT

SPEAKERS

4ΩMIN

VIDEO

(AUDIO)

OPTICAL OUT

ENGLISH

OVERVIEW__________________________________________________________________________________

Remote control

1 ... 0 Numeric keys for various inputs.

SLEEP Activates the sleep timer.

MEMORY For saving various functions.

88ON Switches the stereo system on and off again.

KFor inserting ”search marks” during recording.

●Switches to recording pause.

VIDEO Selects the programme source »external device«.

rr Rewinds the tape.

ee Fast forwards the tape.

rSelects the programme source »TAPE«, automatically starts

the cassette reverse mode;

starts again after reverse mode stops.

■Ends playback/recording of the cassette.

eSelects the programme source »TAPE«, cassette playback

starts automatically;

starts again after the replay stops.

aa5a TUNE – In tuner mode: for manual tuning of the frequency

s6ssTUNE + band;

selects frequencies step-by-step.

In CD mode: for selecting a title;

keeping it pressed down enables you to search for a

particular passage.

1 2 3

4 5 6

7 8 9

SLEEP MEMORY

REMOTE CONTROL UMS 25

FM MODE RANDOM

PRESET REPEAT

VOLUME

TUNER/BAND SOUND PRESETS

VIDEO

TUNE -+ TUNE

OVERVIEW__________________________________________________________________________________

1 2 3

4 5 6

7 8 9

SLEEP MEMORY

REMOTE CONTROL UMS 25

FM MODE RANDOM

PRESET REPEAT

VOLUME

TUNER/BAND SOUND PRESETS

VIDEO

TUNE -+ TUNE

eII Selects the programme source »CD«;

starts the playback of a CD and switches to playback pause.

■Ends playback of a CD.

FM MODE Switches stereo broadcasts from stereo to mono.

PRESET Selects the channel positions in TUNER mode.

RANDOM Selects titles in CD mode for playback in random order.

REPEAT Repeats titles or a music programme in CD mode.

TUNER/BAND Selects the programme source »TUNER«;

selects the frequency ranges »FM«, »MW«, »LW«.

– VOLUME + Adjusts the volume.

SOUND PRESETS Selects the sound settings »POP «, »ROCK«, »JAZZ«,

»CLASSIC«.

CONNECTION AND PREPARATION FOR USE_______

ENGLISH

Connection

Connecting the aerial

1Insert the house aerial in the aerial socket »FM 75 Ω« of the stereo

system.

Note:

If no house aerial system is available, use the supplied auxiliary aerial. This

aerial enables reasonably good reception of local FM (VHF) stations.

The auxiliary aerial should not be shortened.

2Insert the cables for the supplied frame aerial in the »EXT. ANT AM

LOOP « terminals. Position the frame aerial to achieve the best MW/LW-

reception possible.

Connecting the loudspeakers

1Insert the loudspeaker plugs in the jacks »L R SPEAKERS 4 ΩMIN « of

the stereo system.

R = right channel, L = left channel.

Connecting external device

1Connect the sound output jacks of the external device (for example,

television, DVD-player, etc.) to the jacks »IN R L VIDEO (AUDIO) « of the

stereo system using a cinch cable.

Note:

Switch the stereo system off to connect external signal sources. Make sure

stereo channels are properly connected:

R = right channel (red), L = left channel (white).

75Ω

LOOP

EXT.ANT

SPEAKERS

4ΩMIN

VIDEO

(AUDIO)

CD OPEN/CLOSE

OPTICAL OUT

TV R

75Ω

SPEAKERS

4ΩMIN

VIDEO

(AUDIO)

OPTICAL OUT

CONNECTION AND PREPARATION FOR USE______________________

Connecting a digital recording device

1Connect jack »OPTICAL OUT« on the stereo system by an OPTICAL cable

to the appropriate jack on the external device (e.g., MD or CDR).

– A CD playback can be recorded by a digital recording device via this jack.

Connecting headphones

1Insert the jack plug for the headphone in the »PHONES « jack of the stereo

system.

– The loudspeakers of the stereo system are switched off.

Connecting mains cable

1Insert the mains cable in the socket.

Caution:

The only way to isolate the stereo system from the mains supply is to pull the

plug.

PHONES

UMS 25

REMOTE CONTROLLED HIFI STEREO MICRO SYSTEM

AUTO REVERSE

TUNER/BAND SU

SOU

75Ω

OPTICAL OUT

VIDEO

(AUDIO)

SPEAKERS

4ΩMIN

VIDEO

(AUDIO)

Autres manuels pour UMS 25

Table des matières

Autres manuels Grundig Système stéréo

Grundig

Grundig Scenos UMS 6400 DVD Manuel utilisateur

Grundig

Grundig V 23 Manuel utilisateur

Grundig

Grundig PA 2 Manuel utilisateur

Grundig

Grundig VERTIGA UMS 5101 CDC Manuel utilisateur

Grundig

Grundig M 2050 BT DAB+ Manuel utilisateur

Grundig

Grundig CDS 3000 DEC Manuel utilisateur

Grundig

Grundig K-RCD 120 Manuel utilisateur

Grundig

Grundig RBX 1-RF Manuel utilisateur

Grundig

Grundig CMS 2000 BT Manuel utilisateur

Grundig

Grundig K-RCD 110 Manuel utilisateur

Grundig

Grundig Vertiga UMS 4600 DEC Manuel utilisateur

Grundig

Grundig CDM 800 Manuel utilisateur

Grundig

Grundig Varixx UMS 4401 SPCD Manuel utilisateur

Grundig

Grundig RCD8300 Manuel utilisateur

Grundig

Grundig VARIXX UMS 4800 Manuel utilisateur

Grundig

Grundig WMS 3000 BT DAB+ Manuel utilisateur

Grundig

Grundig 01M-GLR7640-4320-07 Manuel utilisateur

Grundig

Grundig OVATION CDS 7000 SPCD Manuel utilisateur

Grundig

Grundig UMS 100 Manuel utilisateur

Grundig

Grundig CIRFLEXX UMS 4100 Manuel utilisateur

Grundig

Grundig RCD 2000 Manuel utilisateur

Grundig

Grundig UMS 12-S Manuel utilisateur

Grundig

Grundig MS 4101 Manuel utilisateur

Grundig

Grundig 01M-GHF1080-1421-01 Manuel utilisateur

Manuels Système stéréo populaires d'autres marques

LG CM3330B Manuel utilisateur

Sony

Sony SS-CEP50 Manuel utilisateur

Cetacea Sound

Cetacea Sound CVS-II Manuel utilisateur

Aiwa

Aiwa XR-H66MD Manuel utilisateur

Denon

Denon UCD-250 Manuel utilisateur

Sanyo

Sanyo DC-MX41i Manuel utilisateur

Sharp

Sharp CD-ES600V Manuel utilisateur

Exibel

Exibel BDX600-UK Manuel utilisateur

Sanyo

Sanyo DC-F320 Manuel utilisateur

Philips

Philips FWM583X Manuel utilisateur

Sharp

Sharp CD-C462 Manuel utilisateur

Onkyo

Onkyo CBX 300 - CD / MP3 Clock Radio Manuel utilisateur

Aiwa

Aiwa XR-EM70 Manuel utilisateur

Cyrus

Cyrus Lyric Manuel utilisateur

Philips

Philips MCM159/98 Manuel utilisateur

Philips/Magnavox

Philips/Magnavox Magnavox FW 62C Manuel utilisateur

RCA

RCA RS3965SB Manuel utilisateur

Sharp

Sharp XL-UH240 Manuel utilisateur