Greenlee 624 Mode d'emploi

OPERATING, SAFETY AND SERVICE

INSTRUCTION MANUAL

For additional copies at no charge order 999 8117.3

624

WIRE GRIP

Read and undesestand this material before operating

or servicing this tool. Failure to understand how to

safely operate could result in an accident causing seri-

ous injury or death. This tool should only be operated

by qualied personnel.

999 8117.3 © 2019 Greenlee Tools, Inc. IM-984 REV 2 10/19

CABLE PREPARATION INSTRUCTIONS:

Strip approximately three inches of insulation off the

ends of the cables to be pulled.

The cable may be reduced in diameter as follows:

1. The central core should be clipped away and the

outer strands used in the grip head.

2. Using the Allen Wrench provided, back out

the set screws far enough to accomodate the

stripped cables.

3. Insert the bare wire strands into the grip head as

far as they will go.

4. Tighten both set screws in each grip jaw securely

against the conductors.

5. CAUTION: If the set screws extend above the

surface of the gripping head, damage to the

conduit could result. To prevent this, wrap the

head with electrical tape.

The Greenlee No. 624 Wire Grip is designed with four

gripping jaws to pull one or more conductors of either

copper or aluminum in 2” or larger size conduit.

The 624 Greenlee Wire Grip contains the following:

• One Each No. 624 Wire Grip

• One Each 905 1208.1 Allen Wrench

• Two Each 905 1352.0 Extra Set Screws

IMPORTANT: To avoid a pulling hazard, use the

following maximum load ratings.

• 1750 pounds maximum when a single wire grip

collar is used.

• 3250 pounds maximum on a wire grip pair, 624S

or 624L.

• 6500 pounds maximum both grip pairs.

NOTE: The grip head should not be more than 60%

lled nor less than 40% lled to assure that the set

screw does not project above the surface of the grip

body when the set screws are tightened down.

Greenlee Tools, Inc.

4455 Boeing Drive, Rockford, IL 61109-2988 USA

800/435-0786, in Illinois call 815/397-7070

Fax: 815/397-1865

Service: 800/435-2932, Canada: 800/233-5924

Table des matières

Autres manuels Greenlee Outils électriques

Greenlee

Greenlee ESP710L Manuel utilisateur

Greenlee

Greenlee GATOR ESP710 Manuel utilisateur

Greenlee

Greenlee HK06FT Manuel utilisateur

Greenlee

Greenlee GATOR CK12ID Manuel utilisateur

Greenlee

Greenlee CTR200 Manuel utilisateur

Greenlee

Greenlee E12CCXL Manuel utilisateur

Greenlee

Greenlee EK50ML Manuel utilisateur

Greenlee

Greenlee 7238SB SLUG-BUSTER Fiche technique

Greenlee

Greenlee GATOR ES20L Manuel utilisateur

Greenlee

Greenlee GATOR CLS60GL Manuel utilisateur

Greenlee

Greenlee GATOR EK06ATL Manuel utilisateur

Greenlee

Greenlee Fairmont F07 Manuel utilisateur

Greenlee

Greenlee 7304 Manuel utilisateur

Greenlee

Greenlee GPU 18-8 Mode d’emploi

Greenlee

Greenlee 1400 Manuel utilisateur

Greenlee

Greenlee GATOR CUAP32GL Manuel utilisateur

Greenlee

Greenlee Quick Draw Series Manuel utilisateur

Greenlee

Greenlee 507 6603.2 Instructions d'utilisation et d'installation

Greenlee

Greenlee EK12IDLX Manuel utilisateur

Greenlee

Greenlee Quick Draw 7804SB Manuel utilisateur

Greenlee

Greenlee CLS 60 plus Manuel utilisateur

Greenlee

Greenlee F05 Manuel utilisateur

Greenlee

Greenlee GATOR LS100L Manuel utilisateur

Greenlee

Greenlee Gator LS-60-ULTRA Manuel utilisateur

Manuels Outils électriques populaires d'autres marques

AEG

AEG OMNI-JS Manuel utilisateur

SIP

SIP 01533 Manuel utilisateur

Ribimex

Ribimex PRS499 Manuel utilisateur

3M

3M Fiber Optic Connector Crimp Tool Manuel utilisateur

Ryobi

Ryobi P524 Manuel utilisateur

ROJEK

ROJEK FSN 300A Manuel utilisateur

Kemper

Kemper 1740PRO Manuel utilisateur

WABCO

WABCO OptiTire Manuel utilisateur

EINHELL

EINHELL TE-MS 18/210 Li Manuel utilisateur

Orgapack

Orgapack OR-T 85 Guide rapide

TOUGHCUT

TOUGHCUT Diamond 400 Manuel utilisateur

Yaros

Yaros PB-3603 Manuel utilisateur

Fein

Fein BSS 2.0 E Guide de configuration

Baileigh Industrial

Baileigh Industrial SS-2725 Manuel utilisateur

Milwaukee

Milwaukee 2674-20 Manuel utilisateur

Fein

Fein BLs 1.6 Manuel utilisateur

Princess

Princess Electric Multi Sharpener Manuel utilisateur

FOREDOM

FOREDOM K.1050 Manuel