Grandview CN Series Manuel utilisateur
GRANDVIEW REPRODUCING GENUINE COLORS
GRANDVIEW REPRODUCING GENUINE COLORS
Thank you forpurchasing a Grandviewprojection screen.
Before use, pleaseread instructions carefully. Afterinstallation, store instructionsfor future reference.
Model CN-Sxx
Instruction Manual for
CN Series
Manual Pull-Down with Speed Control Mechanism
ISO9001:2000
International Certification
Grandview Crystal Screen Canada Ltd.
#11- 3751 North Fraser Way,
Marine Way Business Centre,
Burnaby, BC, Canada V5J 5G4
Tel: 1-604-412-9777 Fax: 1-604-412-9796
Website: www.grandviewscreen.ca
Guangzhou Grandview Crystal Screen Co., Ltd.
P.O. 511400 Federal Ind. Zone No. 363, Yushan West Road,
Shiqiao, Panyu District, Guangzhou, Guangdong, China
Tel: +8620-8489-9499 Fax: +8620-8480-3343
Website: www.grandviewscreen.com
1
Accessories
Metal Casing
Screen Fabric
Description
End Cap
Handle
Installation Manual (1pc)
10 x 40mmAnchor and bolts (8pcs)
52
Installation
This projection screen should be installed at the best possible viewing position for the audience. Take out all
the parts from the packaging and follow the accessories guideline to ensure you have all the parts. The parts
needed will vary depending on which installation you choose to use. For installation on a wood wall or ceiling,
use 10 x 40 anchors and screws.
Wall Mount
Using a tapemeasure, measure the distance between the two keyholes onthe casing (Figure 1).
According to themeasurement, use the drill to drill identical holes of the appropriate size on the wall
(use a smallerdrill bit than the actual screws) and ensure thatit is level (Figure 2 & 3). Screw inthe
appropriate screws, either10x40 by itself for wood walls or with anchors for drywalls, leaving enough
space at theend to hang the casing (Figure 4). To ensure thatthe screen islevel, use a level to check
(Figure 5).
The ceiling or wallused for fixture installation must be secure to prevent the screens from falling.
Please read the followingas any damage to the screen surface will affect the quality of the picture:
1.Avoid contact ortouching the screen surfaceas it may cause scratches or tears.
2.Do not writeor draw on the surface
3.Clean the screen witha soft cloth andlukewarm water. Donot use any detergentor cleaning products.
Roll up the screenafter every use.
Ensure that the screenis level when installing; do not pull on the sides or foldthe screen.
Toprevent unnecessary damage, theoperating and maintenance ofthe screen should bedone by adults.
Ignoring the safety warnings may lead to
inju ries and /or damagingthe product.
Fixtures should be installed in a secure place
to avoid accidents or the screen falling.
Roll up the screen after every use. Leaving
it hanging for a long period oftimemay cause
the fabric to loosen.
Please contact your local dealer for repairs
or maintenance . Please contact our compan y
if you have any further qu estion s . Avoid
taking apart the fixtures yourself . Loose
parts may cause the screen to fall.
Warnings
Do not take apart and replace with unknown parts. If there are any problems, please contact your local dealer.
Product specifications are subject to change.
34
Ceiling Mount
Using a tape measure, measure the distance between the two keyholes on the casing (Figure 1).
According to the measurement, use the drillto drill identical holes of the appropriate size on the ceiling
(use a smaller drill bit than the actual screws)and ensure that it is level (F igure 2 & 3). Screw in the hook
screws (not provided), and lift the screen into the hook screws to hang (Figure 4). To ensure that the
screen is level, use a level to check (Figure 5).
Wood material installation
Concrete material installation
Hidden installation
Ceiling mount
Wall mount
Wall/Ceiling Mounting Installation
Ceiling mount
Wall mount
Ceiling mount
Wall mount
Instructions
Pull down to the desired height; pause for 3 seconds, and the screen will self-lock.
1. Use rope to pull down bottom rod until with in hand reach distance.
2. Continue to pull down with hand to desired height, and then hold for 3 seconds.
3. To retract screen, pull down lightly to release locking system, let go and the screen will return to casing.
Autres manuels Grandview Écran de projection
Grandview
Grandview GRIP084V Manuel utilisateur
Grandview
Grandview FC-FHP-MF Series Manuel utilisateur
Grandview
Grandview FC-FH-MF II Series Manuel utilisateur
Grandview
Grandview Ultimate PP-G Series Manuel utilisateur
Grandview
Grandview CB-Sxx Manuel utilisateur
Grandview
Grandview DIAS DI-M Series Manuel utilisateur
Grandview
Grandview SkyShow Series Manuel utilisateur
Grandview
Grandview PT-L Series Manuel utilisateur
Grandview
Grandview LF-Mxx Manuel utilisateur
Grandview
Grandview Large Stage MAIII Manuel utilisateur
Grandview
Grandview LF-VMF-77 Manuel utilisateur
Grandview
Grandview Edge R2 Series Manuel utilisateur
Grandview
Grandview EDGE R3 PE-L Series Mode d’emploi
Grandview
Grandview Sky-Show Manuel utilisateur
Grandview
Grandview LF-PU Series Manuel utilisateur
Grandview
Grandview CB-UY92 Manuel utilisateur
Grandview
Grandview Large Sky-Show Manuel utilisateur
Grandview
Grandview Edge R1 Series Manuel utilisateur
Grandview
Grandview Sky-Show Manuel utilisateur
Grandview
Grandview CR-Pxx Manuel utilisateur
