Good Way WD5110 Manuel utilisateur

Wireless USB Dongle
User’s Manual

Wireless USB Dongle
i
ABOUT THIS MANUAL
This manual is designed for use with the Wireless USB Dongle. Information in this document
has been carefully checked for accuracy; however, no guarantee is given to the correctness of
the contents. The information in this document is subject to change without notice. The
manufacturer does not make any representations or warranties (implied or otherwise) regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of
profit or any commercial damage, including but not limited to special, incidental, consequential,
or other damage.
SAFETY INSTRUCTIONS
Always read the safety instructions carefully:
Keep this User’s Manual for future reference
Keep this equipment away from humidity
If any of the following situation arises, get the equipment checked by a service technician:
The equipment has been exposed to moisture.
The equipment has been dropped and damaged.
The equipment has obvious sign of breakage.
The equipment has not been working well or you cannot get it to work according to the
User’s Manual.
COPYRIGHT
This document contains proprietary information protected by copyright. All right are reserved. No
part of this manual may be reproduced by any mechanical, electronic or other means, in any
form, without prior written permission of the manufacturer.
TRADEMARKS
All trademarks and registered trademarks are the property of their respective owners or
companies.

Wireless USB Dongle
ii
Table of Contents
1. Introduction............................................................................................................1
Features..............................................................................................................2
Package Contents...............................................................................................2
System Requirements.........................................................................................2
2. Installation..............................................................................................................3
On Windows XP..................................................................................................3
On Windows Vista...............................................................................................9
3. Wireless Connection ...........................................................................................13
To make Cable Association...............................................................................13
To make Pin Association...................................................................................15
4. Specifications.......................................................................................................16
5. Troubleshooting....................................................................................................17
6. Regulatory Compliance.......................................................................................18
FCC ..................................................................................................................18
CE.....................................................................................................................18
WEEE Information ............................................................................................18

Wireless USB Dongle
1
1. Introduction
This Wireless USB Dongle enables you to access your USB devices without limitation
caused by wire. This Dongle is designed to adapt your regular USB 2.0 interface to a
Wireless USB interface. Simply plug this dongle to your USB socket then the notebook
turns into a wireless USB enabled platform, access your wireless USB devices such as
printer, scanner freely without boundary up to 10 meters. Just plug the dongle in, then
enjoy the freedom and take the advantage of operation wirelessly with the latest
Wireless USB technology.

Wireless USB Dongle
2
Features
Connect USB devices wirelessly
No more wires , and less cable clutter
Transmission speeds of up to 480Mbps
Operation range up to 10 meters
Support USB bus power low power use
UWB (Ultra-Wide Band) technology use
Package Contents
Wireless USB Dongle x1
CD (Driver and User’s Manual) x1
Quick Installation Guide x1
System Requirements
WindowsXP SP2, Vista32/64-bit
Applicable for Serial Products of WUSB
Wireless USB 1 – Port Hub
Wireless USB 4 – Port Hub
Wireless USB Display Adapter
Wireless USB Enclosure
Wireless USB Docking
Notice
Environmental factors will affect wireless signal range. Actual wireless performance
depends on various factors, including wireless distance, network condition, operation
system, hardware environment, actual data throughput etc. To get the better
performance, please note the host and device antenna need to be leveled horizontally
and without obstacle between when using.

Wireless USB Dongle
3
2. Installation
On Windows XP
Caution: DO NOT connect the product to your computer before installing the driver on the
provide CD.
To install Microsoft (R) .NET 2.0 Framework
1. Insert the provided CD into your disc drive and the installer program will run
automatically when the Wireless USB Dongle CD is inserted.
If the installer program doesn’t run automatically, please locate and double-click on
the Autorun.exe file in the CD to launch the install program.
2. If there is no Microsoft (R) .NET 2.0 Framework in your computer, you may see the
screen prompted as below, and just click on Yes to start the Microsoft (R) .NET 2.0
Framework install process.

Wireless USB Dongle
4
3. When you see the Microsoft .NET Framework 2.0 Setup screen as below, just click on
Next anyway.
4. When you see License Agreement as below, please Click on Yes to continue installs
process.

Wireless USB Dongle
5
5. Please wait few minutes to run the Setup process, the actual needed time will
depends on your hardware environment.
6. Please click on Finish to complete the installation of Microsoft .NET Framework 2.0.

Wireless USB Dongle
6
To install Wireless USB Dongle Driver
1. Insert the provided CD into your disc drive and the installer program will run
automatically when the Wireless USB Dongle CD is inserted. Please click Install to
start the Wireless USB Driver install.
If the installer program doesn’t run automatically, please locate and double-click on
the Autorun.exe file in the CD to launch the install program.
2. Please wait few second to run the Preparing to Install …process, the actual need time
will depends on your hardware environment.

Wireless USB Dongle
7
3. When you see the Wireless USB Host Adapter screen as below, just click on Next
anyway.
4. When you see License Agreement as below, please click on Yes to start Wireless USB
Host Adapter software configuring process.
Table des matières
Manuels Modem populaires d'autres marques

Davicom
Davicom DM562AP Manuel utilisateur

EpiValley
EpiValley TATA indicom SXC-1080 Manuel utilisateur

Zte
Zte WiMAX Manuel utilisateur

Intelimax
Intelimax MA-2060 Manuel utilisateur

SMC Networks
SMC Networks D3CM1604V Manuel d'utilisation et d'entretien

Telstra
Telstra Wi-Fi 4G Advanced Pro X Manuel utilisateur

US Robotics
US Robotics 3453C Manuel utilisateur

MaxTech
MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuel utilisateur

Zte
Zte MF823 Manuel utilisateur

Four-Faith
Four-Faith F1403 Manuel utilisateur

Sierra Wireless
Sierra Wireless AIRLINK MP595W Manuel utilisateur

Gemtek
Gemtek WiMAX WIXFBR-103 Manuel utilisateur





