Go Rhino DOMINATOR SERIES Manuel de programmation

REV/B

QTY PARTS DESCRIPTION

12 3/8” X 2” HEX BOLTS

24 3/8” HEX NUTS

24 3/8” LOCK WASHERS

48 3/8” FLAT WASHERS

QTY

PARTS DESCRIPTION

3/8” X 1” HEX BOLTS

D02 FRONT AND REAR MOUNTING BRACKETS

D03 CENTER MOUNTING BRACKETS

D24097P PASSENGER SIDESTEP

D24097D DRIVER SIDESTEP

INSTALLATION INSTRUCTIONS

Read the instructions completely before you begin the installation.

If your vehicle is equipped with factory running boards, remove the boards, brackets and fasteners.

This installation uses (3) mounting brackets per side, and requires drilling (2) holes in the lower body

pinch mold for each bracket.

It is the installer’s responsibility to confirm all measurements and that there are no obstructions such as

brake, fuel or electrical lines before drilling.

Step 1. Beginning with the passenger side measure reward from the front fender bolt (refer to diagram for

dimensions) and scribe (6) vertical lines on the body pinch mold.

DOMINATOR SERIES SIDESTEPS

ASSEMBLY & INSTALLATION INSTRUCTIONS

PART NO. D24097 02-08 DODGE RAM QUAD CAB

Do not attempt to install this product on any vehicle other than the one it is designed for and listed a ove!

Step 2. Measure up from the bottom edge of the pinch mold 7/16” and scribe intersecting lines.

Step 3. Confirm the measurements, center punch and drill 3/8” holes through the body pinch mold.

Repeat the above steps for the driver side.

REAR OF VEHICLE

D02 MOUNTING BRACKETS

D03 MOUNTING BRACKET

D24097P PASSENGER SIDESTEP

FRONT FENDER BOLT

Step 4. Loosely attach the mounting brackets to the body pinch mold using the 3/8” x 2” hex bolts, flat

washers, lock washers and hex nuts as shown.

Step 5. Position the passenger sidestep up to the mounting brackets and loosely attach it to the brackets

using the 3/8” x 1” hex bolts, flat washers, lock washers and hex nuts.

Step 6. Align sidestep with the body and then tighten all mounting bracket and sidestep nuts and bolts.

Step 7. Repeat the above steps to install the driver side mounting brackets and sidestep.

Ce manuel convient aux modèles suivants

Autres manuels Go Rhino Pièces détachées automobiles

Go Rhino

Go Rhino DOMINATOR II Series Manuel utilisateur

Go Rhino

Go Rhino dominator d2 series Manuel utilisateur

Go Rhino

Go Rhino DOMINATOR 2 SERIES Manuel de programmation

Go Rhino

Go Rhino DOMINATOR II Series Manuel utilisateur

Go Rhino

Go Rhino DOMINATOR II Series Manuel utilisateur

Go Rhino

Go Rhino dominator 2 series Manuel utilisateur

Go Rhino

Go Rhino DOMINATOR D2 SERIES Manuel utilisateur

Go Rhino

Go Rhino DOMINATOR 2 SERIES Manuel de programmation

Go Rhino

Go Rhino Dominator 2 series Manuel utilisateur

Manuels Pièces détachées automobiles populaires d'autres marques

Hellwig

Hellwig 5812 Manuel utilisateur

Boomba Racing

Boomba Racing EVO X Manuel utilisateur

Xtracer

Xtracer 1152 Manuel utilisateur

Tuff Country

Tuff Country 32103 Manuel utilisateur

ADD

ADD 2003 – Current Chevy 1500/2500 ADD Lite Manuel utilisateur

ADD

ADD 2007-2014 Jeep JK venom Manuel utilisateur

Gibson

Gibson 69522 Manuel utilisateur

Airaid

Airaid 400-279 Manuel utilisateur

Poison Spyder

Poison Spyder JK BRAWLER ROCKERS Manuel de service

ADD

ADD 2007-2013 GMC 1500 Manuel utilisateur

aFe Power

aFe Power 54-12208 Manuel utilisateur

USA Standard Gear

USA Standard Gear Spartan Locker Manuel utilisateur

Fabtech

Fabtech FTS26016BK Manuel utilisateur

Torklift

Torklift C2207/FMTPJ07LDCHSB Manuel utilisateur

Grammer

Grammer COMPACTO Comfort S Manuel utilisateur

RANCHO

RANCHO RS66505B Manuel utilisateur

Renault

Renault ESPACE 82 01 440 136 Manuel utilisateur

Chassisworks

Chassisworks gStreet 5817-F10-12 Manuel utilisateur