ADD 2007-2013 GMC 1500 Manuel utilisateur

2007-2013 GMC 1500

Venom Front Bumper Installation Instructions

Addictive Desert Designs | Page 1

Addictive Desert Designs

Preparation:

• Disconnect the negative battery terminal. Park the vehicle on level ground and set the emergency brake.

• We recommend reading through the installation instructions in whole before performing the work.

• Estimated Installation Time: 2 Hours

**is installation requires 2 people for best results**

You will need the following tools:

- Ratchet - 13/16" Socket - 15mm Socket

- 18mm Socket - Cuto Wheel - Black Paint

Included in Kit:

- Stock Hardware is Reused

Removal:

1. From underneath the truck, unplug both fog light connectors. (Fig A)

2. From underneath the truck, use a 13/16" Socket to loosen the Main Bumper Mounting Nuts (x4). en,

remove these bolts. (Fig B)

Fig A

Fig B

2007-2013 GMC 1500

Venom Front Bumper Installation Instructions

Addictive Desert Designs | Page 2

Addictive Desert Designs

3. On each side of the truck, there are two bolts that hold the bumper support bar to the truck's frame. Use a

15mm Socket to remove these bolts. (Fig C)

4. Remove the OEM Bumper. ere are some hooks on the top side of the bumper (that connect it to the

valance) that will need to be undone as you work the bumper o of the truck. (Fig D)

5. Use an 18mm Socket & Wrench to remove the tow hook mounting bolts (2 per side). en, remove the tow

hooks. (Fig E)

Valence Hooks

Fig C

Fig D

Fig E

2007-2013 GMC 1500

Venom Front Bumper Installation Instructions

Addictive Desert Designs | Page 3

Addictive Desert Designs

6. Remove the frame bells. ere is a weld along the side of each bell. To remove the bells, use a cuto wheel to

cut along each weld. (Fig F)

7. Using a 15mm Socket, remove the skid plate mounting bolts (x4). en, remove the skid plate. (Fig G)

Cut along this weld

and the weld in the

same spot on the

other side of the bell.

8. Prepare to install your new ADD Venom Front Bumper.

Fig F

Fig G

2007-2013 GMC 1500

Venom Front Bumper Installation Instructions

Addictive Desert Designs | Page 4

Addictive Desert Designs

Installation:

9. Set your new bumper in place. Reinstall the hardware from Step 2 to hold the bumper in place. Leave these

bolts loose for now. (Fig H)

10. Align the bumper so that it sits straight in relation to the grille. Once the position has been set, torque the

mounting bolts to the manufacturer's torque specication.

11. Using a utility knife or something similar, trim your inner fender liners following a line similar to what is

shown in (Fig I).

Fig H

Fig I

2007-2013 GMC 1500

Venom Front Bumper Installation Instructions

Addictive Desert Designs | Page 5

Addictive Desert Designs

12. Stand back and enjoy your new ADD Venom Front Bumper.

13. Check and re-tighten all mounting bolts, if needed, aer 100 miles and periodically thereaer.

For Additional Support or Technical Questions

Please call 480-671-0820

Email [email protected]

Table des matières

Autres manuels ADD Pièces détachées automobiles

ADD

ADD 2015 – Current Chevy Colorado & GMC Canyon ADD... Manuel utilisateur

ADD

ADD 2018-Current Ford F150 Manuel utilisateur

ADD

ADD 2003 – Current Chevy 1500/2500 ADD Lite Manuel utilisateur

ADD

ADD 2004 - 2012 Chevy Colorado/GMC Canyon Manuel utilisateur

ADD

ADD 2009-2018 Ram 1500 ADD Lite Manuel utilisateur

ADD

ADD 2007-2014 Jeep JK venom Manuel utilisateur

ADD

ADD 2015 – Current Chevy Colorado & GMC Canyon Manuel utilisateur

Manuels Pièces détachées automobiles populaires d'autres marques

Hellwig

Hellwig 5812 Manuel utilisateur

Boomba Racing

Boomba Racing EVO X Manuel utilisateur

Xtracer

Xtracer 1152 Manuel utilisateur

Go Rhino

Go Rhino DOMINATOR SERIES Manuel de programmation

Go Rhino

Go Rhino DOMINATOR 2 SERIES Manuel de programmation

Tuff Country

Tuff Country 32103 Manuel utilisateur

Gibson

Gibson 69522 Manuel utilisateur

Airaid

Airaid 400-279 Manuel utilisateur

Poison Spyder

Poison Spyder JK BRAWLER ROCKERS Manuel de service

aFe Power

aFe Power 54-12208 Manuel utilisateur

USA Standard Gear

USA Standard Gear Spartan Locker Manuel utilisateur

Fabtech

Fabtech FTS26016BK Manuel utilisateur

Go Rhino

Go Rhino DOMINATOR D2 SERIES Manuel utilisateur

Torklift

Torklift C2207/FMTPJ07LDCHSB Manuel utilisateur

Grammer

Grammer COMPACTO Comfort S Manuel utilisateur

RANCHO

RANCHO RS66505B Manuel utilisateur

Renault

Renault ESPACE 82 01 440 136 Manuel utilisateur

Chassisworks

Chassisworks gStreet 5817-F10-12 Manuel utilisateur