Gigabyte 6VMA Manuel utilisateur
Table Of Contents
1
TABLE OF CONTENTS
1. INTRODUCTION
1.1. PREFACE..........................................................................................................1-1
1.2. KEY FEATURES...............................................................................................1-1
1.3. PERFORMANCE LIST......................................................................................1-2
1.4. BLOCK DIAGRAM.............................................................................................1-3
1.5. INTRODUCE THE PentiumII / III Processor .................................................1-4
1.6. What is AGP?....................................................................................................1-6
2. SPECIFICATION
2.1. HARDWARE .....................................................................................................2-1
2.2. SOFTWARE......................................................................................................2-2
2.3. ENVIRONMENT................................................................................................2-2
3. HARDWARE INSTALLATION
3.1. UNPACKING.....................................................................................................3-1
3.2. MAINBOARD LAYOUT.....................................................................................3-2
3.3. QUICK REFERENCE FOR JUMPERS & CONNECTORS..............................3-1
3.4. DRAM INSTALLATION.....................................................................................3-7
3.5. CPU SPEED SETUP.........................................................................................3-7
3.6. CMOS RTC & ISA CFG CMOS SRAM.............................................................3-9
3.7. SPEAKER CONNECTOR INSTALLATION......................................................3-9
3.8. HARDWARE RESET SWITCH CONNECTOR INSTALLATION....................3-9
3.9. POWER LED CONNECTOR INSTALLATION.................................................3-9
3.10. IDE & ATAPI DEVICE INSTALLATION..........................................................3-9
3.11. PERIPHERAL DEVICE INSTALLATION........................................................3-9
3.12. KEYBOARD & PS/2 MOUSE INSTALLATION...............................................3-10
4. BIOS CONFIGURATION
6VMA
2
4.1. ENTERING SETUP...........................................................................................4-1
4.2. CONTROL KEYS ..............................................................................................4-1
4.3. GETTING HELP................................................................................................4-2
4.3.1. Main Menu.............................................................................................4-2
4.3.2. Status Page Setup Menu / Option Page Setup Menu............................4-2
4.4. THE MAIN MENU..............................................................................................4-2
4.5. STANDARD CMOS SETUP MENU..................................................................4-4
4.6. BIOS FEATURES SETUP ................................................................................4-8
4.7. CHIPSET FEATURES SETUP.........................................................................4-12
4.8. POWER MANAGEMENT SETUP....................................................................4-17
4.9. PNP/PCI CONFIGURATION ............................................................................4-21
4.10. LOAD BIOS DEFAULTS.................................................................................4-22
4.11. LOAD PERFORMANCE DEFAULTS .............................................................4-23
4.12. INTEGRATED PERIPHERALS.......................................................................4-24
4.13. SUPERVISOR/USER PASSWORD...............................................................4-29
4.14. IDE HDD AUTO DETECTION........................................................................4-30
4.15. SAVE & EXIT SETUP .....................................................................................4-31
4.16. EXIT WITHOUT SAVING ...............................................................................4-32
APPENDIX A: VIA Chipset Driver Installation
A.1. VIA Patch 95/98 Driver Ver.1.1(Win95/98 ONLY).............................................A-2
A.2. VIA AGP Driver Ver.2.9(Win95/98 ONLY)........................................................A-5
A.3. VIA PCI Routing Mimiport Driver Ver.1.3(Win98 ONLY)...................................A-8
A.4. Bus Master IDE Driver ......................................................................................A-10
APPENDIX B: Audio Driver Driver Installation
B.1. ESS Solo-1 PCI sound driver installation...........................................................B-1
APPENDIX C: Bugs & Limitations…………………………………………….C-1
Introduction
1-1
1. INTRODUCTION
1.1. PREFACE
Welcome to use the 6VMA motherboard. It is a PentiumII / III / Celeron
Processor based PC / AT compatible system with AGP/ PCI / ISA Bus, and
has been designed to be the fastest PC / AT system. There are some new
features allow you to operate the system with just the performance you want.
This manual also explains how to install the motherboard for operation, and
how to set up your CMOS CONFIGURATION with BIOS SETUP program.
1.2. KEY FEATURES
qIntel PentiumII / III / CeleronProcessor based PC / AT compatible
mainboard.
qSlot 1 supports PentiumII / III / Celeronprocessor running at 233-633
MHz.
qVIA Apollo Pro-Plus chipset, Supports AGP / SDRAM / Ultra DMA33 IDE /
Keyboard and PS/2 Mouse Power On / ACPI features.
qBuilt-in PCI ESS SOLO-1 audio chip.
qSupports external Modem Ring-On on COMA & COMB and internal
Modem Ring-On.
qSupports Wake-up on LAN (JP7).
qSupports 3xDIMMs using 3.3V SDRAM DIMM module.
qSupports 16MB - 768MB SDRAM memory on board.
q3xPCI Bus slots, 1xISA Bus slots, 1xAGP slot.
qSupports 2 channels Ultra DMA/33 IDE ports for 4 IDE Devices.
qSupports 2xCOM (16550), 1xLPT (EPP / ECP), 1x Floppy port.
qSupports1x Line in, 1x Line Out, 1x Micro in, 2x CD Line in,1x GAME Port,
1x TEL Port.
qSupports 2xUSB ports, 1xPS/2 Mouse, 1xPS/2 Keyboard.
qLicensed AWARD BIOS, 2Mbits FLASH RAM.
6VMA
1-2
q24.5 cm x 20 cm Micro-ATX form factor, 4 layers PCB.
1.3. PERFORMANCE LIST
The following performance data list is the testing results of some popular
benchmark testing programs.
These data are just referred by users, and there is no responsibility for different
testing data values gotten by users. (The different Hardware & Software
configuration will result in different benchmark testing results.)
•CPU PentiumII processor
•DRAM (128 x 1) MB SDRAM (TOSHIBA TC59S6408FTL-80H)
•CACHE SIZE 512 KB included in CPU
•DISPLAY GA-630 AGP Voodoo banshee(16MB SGRAM)
•STORAGE Onboard IDE (IBM DHEA-36481)
•O.S. Windows NT™4.0
•DRIVER Display Driver at 1024 x 768 x 64k colors x 75Hz.
VIA Bus Master IDE Driver 2.3.12
Intel PentiumII
Processor 350MHz(100x3.5) 450MHz(100x4.5)
Winbench99
CPU mark32 881 1110
FPU Winmark 1800 2300
Business Disk 3910 4220
Hi-End Disk 8530 8380
Business Graphics 161 194
Hi-End Graphics 281 354
Winstone99
Business 27.2 31
Introduction
1-3
3.3V EDO/SDRAM
DIMM Sockets
Floppy Port
Hi-End 23.2 27.2
1.4. BLOCK DIAGRAM
PS/2 Keyboard
24MHz
33MHz
33MHz
33MHz
100MHz
Ultra DMA/33
IDE Ports
IDE Bus
PCI Bus
ISA Bus
AGP Bus
LPT Port
COM Ports
DRAM Bus
PS/2 Mouse
USB Bus
USB Ports
14.318MHz
48MHz
14.318MHz
I/O
CHIPSET
Winbond
83977EF
Host Bus
VIA
82C693
CHIPSET
VIA
82C596A
CHIPSET
Clock
Generator
MIC
L-IN
L-OUT SOLO1
24.576MHz
14.318MHz
66MHz
Game
Port
100MHz
AGP SLOT
SLOT 1
6VMA
1-4
1.5. INTRODUCE THE Pentium
II / III Processor
Figure 1:Universal Retention Mechanism & attach Mount
Figure 2:OEM PentiumII Processor
Introduction
1-5
Figure 3: OEM PentiumIII Processor
6VMA
1-6
1.6 What is AGP
?
The Accelerated Graphics Port (AGP) is a new port on the Host-To-PCI bridge
device that supports an AGP port. The main purpose of the AGP port is to
provide fast access to system memory.
The AGP port can be used either as fast PCI port (32-bits at 66MHz vs. 32-bits
at 33MHz) or as an AGP port which supports 2x data-rate, a read queue, and
side band addressing. When the 2x-data rate is used, the port can transmit
data at 533MB/sec (66.6*2*4). The read-queue can be used to pipeline reads –
removing the effects of the reads-latency. Side band addressing can be used to
transmit the data address on a separate line in order to speed up the
transaction.
Specification
2-1
2. SPECIFICATION
2.1. HARDWARE
•CPU −PentiumII/ III/ Celeronprocessor 233 –633 MHz.
−242 pins 66/100 MHz slot1 on board.
•SPEED −66/100 MHz system speed.
−66 MHz AGP bus speed. (2X mode 133MHz)
−33 MHz PCI-Bus speed.
−8 MHz AT bus speed.
•DRAM MEMORY −3 banks 168 pins DIMM module sockets on board.
−Use 16 / 32 / 64 / 128 / 256 MB DIMM module DRAM.
−16 MB~ 768MB SDRAM.
−Supports 3.3V SDRAM.
•CACHE MEMORY −32 KB 1st cache memory included in CPU.
−128KB / 512 KB 2nd cache in CPU.
−Supports DIB speed mode for L2 Cache.
•I/O BUS SLOTS −3 33MHz Master / Slave PCI-BUS.
−1 8MHz 16 bits ISA BUS.
−1 66MHz / 133MHz AGP bus.
•IDE PORTS −2 Ultra DMA 33 Bus Master IDE channels on
board.(Using IRQ14,15)
−Support Mode 3,4 IDE & ATAPI CD –ROM.
•I/O PORTS −Supports 2 16550 COM ports.
−Supports 1 LPT port.
−Supports 1 Floppy port.
−Supports 2 USB ports.
−Supports 1 PS/2 Mouse.
−Supports 1 PS/2 Keyboard.
6VMA
2-2
•Audio Ports −1x Line in
−1x Line out
−1x Micro in
−1x Game Port
−2x CD Line in
−1x TEL Port
•GREEN FUNCTION −Suspend mode support.
−Green switch & Green LED support.
−IDE & Display power down support.
−Monitor all IRQ / DMA / Display / I/O events.
•BIOS −2M bits FLASH RAM.
−Supports Plug & Play, DMI Function.
•DIMENSION −Micro ATX Form Factor, 4 layers PCB.
2.2. SOFTWARE
•DRIVER −UUCD
Bus Master IDE Driver
•BIOS −Licensed AWARD BIOS.
−AT CMOS Setup, BIOS / Chipset Setup, Green
Setup, Hard Disk Utility included.
•O.S. −Operation with MS-DOS, Windows95,
Windows98, WINDOWSNT, OS/2, NOVELL
and SCO UNIX.
2.3. ENVIRONMENT
•Ambient Temp. −0°C to +50°C (Operating).
•Relative Hum. −0 to +85% (Operating).
•Altitude −0 to 10,000 feet (Operating).
•Vibration −0 to 1,000 Hz.
•Electricity −4.9 V to 5.2 V. (Max. 20A current at 5V.)
Autres manuels pour 6VMA
1
Table des matières
Autres manuels Gigabyte Carte mère
Gigabyte
Gigabyte GA-990FXA-UD5 Manuel utilisateur
Gigabyte
Gigabyte B550 AORUS ELITE AX V2 Manuel utilisateur
Gigabyte
Gigabyte GA-686DX Manuel utilisateur
Gigabyte
Gigabyte GA-8IE2004P Manuel utilisateur
Gigabyte
Gigabyte GA-F2A88X-UP4 Manuel utilisateur
Gigabyte
Gigabyte 6BXD Manuel utilisateur
Gigabyte
Gigabyte GA-H81M-HD3 Manuel utilisateur
Gigabyte
Gigabyte GA-G33M-DS2R Manuel utilisateur
Gigabyte
Gigabyte GA-P35-S3G Manuel utilisateur
Gigabyte
Gigabyte A520M H Manuel utilisateur
Gigabyte
Gigabyte Z590 AORUS PRO AX Manuel utilisateur
Gigabyte
Gigabyte GA-5DXSL-RH Manuel utilisateur
Gigabyte
Gigabyte N4120I H Manuel utilisateur
Gigabyte
Gigabyte GA-P55-UD3L Manuel utilisateur
Gigabyte
Gigabyte GA-B85M-Gaming 3 Manuel utilisateur
Gigabyte
Gigabyte GA-8I915ME Series Manuel utilisateur
Gigabyte
Gigabyte GA-8ILMT4 Manuel utilisateur
Gigabyte
Gigabyte B450 AORUS PRO WIFI Manuel utilisateur
Gigabyte
Gigabyte GA-J1800N-D2H Manuel utilisateur
Gigabyte
Gigabyte GA-Z68A-D3-B3 Manuel utilisateur
Manuels Carte mère populaires d'autres marques
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuel utilisateur
Texas Instruments
Texas Instruments ADS8372EVM Manuel utilisateur
Commell
Commell MS-C73 Manuel utilisateur
IBT Technologies
IBT Technologies MB860 Manuel utilisateur
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur
Biostar
Biostar M7VIT Bravo Instructions d'utilisation et d'installation
