Genius KYE Systems Easy Pen pro USB Manuel utilisateur
Easy Pen pro USB Introduction
Page: 1
EUT : STYLUS
FCC ID : FSUGTU504
KYE SYSTEMS CORP.
USER’S Manual
Easy Pen pro USB Introduction
Page: 2
FEDERAL COMMUNICATIONS COMMISSION
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:(1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection. This equipment generates,
uses and can radiated radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference
will not occur in a particular installation If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Shielded interface cables (Tablet) must be used in order to comply with
emission limits.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user‘s authority to operate the equipment.
Easy Pen pro USB Introduction
Page: 3
1.Introduction
The Easy Pen pro USB is a graphics tablet that translates X-Y dimensional data into
computer readable information in cordless pen. Its many use include :
.Guiding the cursor on a computer screen.
.Picking up location on application template.
.Hand writing and electronic signature
.Free hand talking on Internet conference and white board.
Easy Pen pro USB is the best tool for pen computer that includes both absolute and
relative cursor expression modes. It uses the latest advances electromagnetic
technology, which make it accurate and reliable. The Easy Pen pro USB tablet
combine all the advantages of a mouse and graphics tablet to eliminate multiple input
devices and to provide a simplified desktop. You can ‘map’ your tablet to correspond
to the monitor screen, meaning if you place your pen at a specific location on the
tablet, your screen cursor will also move to that location on the monitor.
Easy pen pro USB Fundamental Specification
Page: 4
2.Fundamental Specification
Platform Support PC
Hardware Interface USB
Software Driver GeniTab III USB for Windows3.x, 95, 98, NT3.x , 4.x
Resolution Up to 2,540LPI
Accuracy 0.01 inch
Proximity 8 mm from surface of tablet
Working Area Horizontal : 5 inches , Vertical : 3.75 inches
Data Rate Low Speed 1.5Mbps
Report Rate Up to 125 RPS in interrupt transaction
Protocol Compliance HID v1.1
Power Source USB +5V
Operation mode Endpoint 0 and Endpoint 1 .
Technology Electromagnetic
Cursor Support S-09W Cordless pen
FCC CLASS B, CE, BCIQ approved
Easy Pen pro USB Operation Characteristic
Page: 5
3.Operation Characteristic
1.Tablet : Easy plug and works on USB port with (H) 5 x (V) 3.75
inches sketching area.
2.Stylus : A ball point pen like pointing device , that delivers
electromagnetic flux to tablet to point out where position is.
One tip button like mouse “left button” and barrel button as
“right and middle button” . Both tip and barrel button
function are definable by user’s choice.
3.Button operation force :
Tip button: 15±5g
Barrel button: 100±50g
5.Status indicator on tablet :
Continuous light on to express STYLUS locates in sensing
altitude, means in proximity.
Blinking express STYLUS locates out sensing altitude, means
out proximity.
1.Sketch template :
A very thin film that help you easy to express art of
Writing and sketching.
Easy Pen pro USB User Interface Specifications
Page: 6
6.User Interface Specifications
˙About Genius Tablet
Genius Tablet is a graphics tablet used to create or reproduce diagrams, drawings,
building layouts, maps, etc. You can then save these graphics into your computer
for other uses.
˙Using this tablet, you can:
Trace anything; pictures, drawings, photos, maps, etc.
Draw freehand; achieve precision and accuracy
Move the puck (or stylus) to select commands on the template, or move objects on
the screen Create a symbol library for your most often used symbols using
AutoCAD
Easy Pen pro USB User Interface Specifications
Page: 7
6.1 Information Folder
˙General Information
The Information Folder has general information about the Genius Tablet such as
version, corporation name and linking to Genius Web Site,etc.
Easy Pen pro USB User Interface Specifications
Page: 8
6.2 Basic Folder
˙Changing the Tablet Orientation
Orientation allows you to rotate the Genius Tablet 90 degrees. Landscape is the
normal operating position (with the tablet's interface cables exiting the top of the
tablet). Selecting Portrait allows you to rotate the tablet 90 degrees clockwise from
the normal operating position (so the tablet's interface cables would be exiting from
the right hand side of the tablet). Try changing to portrait orientation if you prefer
using your tablet in a vertical orientation, like a typical sketch pad.
˙Double-Click Test
In the Double-Click Test Box, you can set the widest and highest distance between the
two points of double click and you can set the speed of double click by dragging the
pointer on the slider bar or clicking on the slider bar. Then test the speed in the
"Smiling" area.
˙Tracking Mode
The Tracking Mode function allows you to switch how the Genius Tablet
moves the screen cursor.
The Absolute tracking mode is the normal (default) tablet mode. In absolute mode the
screen is directly mapped to the tablet's active area. In this mode, the lower left
corner of the tablet's active area corresponds to the lower left corner of the screen, the
upper right corner on the tablet corresponds to the upper right corner of the screen,
etc. When you place a pointing device on the tablet, the screen cursor would jump to
the location on the screen that directly corresponds to the position on the tablet. You'll
notice that you don't have to "row" the cursor (e.g., pick up and move over and move
again) like you often have to do with a conventional mouse.
On the other hand, in Relative tracking mode you move the screen cursor just like you
would with a mouse. In relative mode it's possible to find yourself with the screen
cursor at one side of the screen, while your pointing device is at the opposite side of
the tablet. In that case, you would have to pick up and move your pointing device just
like you would do with a mouse. You can set the Relative Resolution in this area by
clicking the bar. The resolution means the number of pixel in an inch. The resolution
is higher on the right side than on the left side.
Easy Pen pro USB User Interface Specifications
Page: 9
˙Tablet Information
You can see the width and height of the tablet in this area.
˙Adjust the Resolution in Absolute Mode
In the Resolution area, you can set the resolution of the tablet in absolute tracking
mode. The resolution refers to the number of pixel in an inch. You can set it from 254
to 2540.
Easy Pen pro USB User Interface Specifications
Page: 10
6.3 ButtonAssignment Folder
˙Use the Button Assignment Function
The Button Assignment function allows you to change the function of the buttons on
your pointing device. Select which pointing device you are using from the Pointing
Device list. This would allow you to change the functions assigned to the different
buttons on that device. Simply pick the button in the Assignment area that
corresponds to the pointing device button you wish to change and then select from the
function list the function you wish to assign to that button. You can set the function of
your button as Left Click, Right Click, Middle Double Click, Copy, etc.
Table des matières
