GE Choice-Alert 45136 Manuel utilisateur

45136

Choice

ALERT

Choice

ALERT

™

Control all Sensors

& accessories from

one location

™

Wireless Alarm System

Alarm Siren

User’s Manual

Low Batt On Armed

ON/OFF LEARN

Important Safeguards 4

Introduction 4

Assigning a Alarm Siren to the system 5-6

Installation 6

Testing the Alarm Siren or your system 6

Erasing Alarm Siren from system 7

Low battery indicator 8

Battery warnings 8

FCC Warning 10

Table of Contents

Before connecting or operating the Alarm Siren,

please read these instructions carefully and save

this manual for future reference.

Congratulations

The GE Choice Alert™Wireless Alarm System is one

of the most affordable and expandable wireless

alarm systems available. You’ll discover the system

offers many features typically found in custom

installed Alarm systems.

The Choice Alert system is reliable and easy-to-use.

With Choice Alert you can select from a line of Sensors

and Accessories; start small and expand as you

need, or create a system that meets all your needs.

The Choice Alert System is protected by Priority

Code Selection technology which provides increased

security and trouble-free wireless connections. It

also guarantees the Control Center will only respond

to signals from your Sensors in and around your home,

and prevents anyone from tampering with

your system.

The user manual explains in simple steps how to

install, use and care for your new Choice Alert

Alarm Siren.

If you have any questions or would like

additional information please visit our web site

www.jascoproducts.com, or contact our

Customer Service Group at 1-800-654-8483.

Important safeguards

Pre Cautions

1. Do not attempt to disassemble the Alarm Siren,

unless described in the user’s manual. There are no

user serviceable parts.

2. Handle with Care – Avoid striking or shaking.

Improper use or storage could damage the Alarm

Siren. Modifying or tampering the device or its internal

components can cause a malfunction and void the

Alarm Siren’s warranty.

3. If you feel the Alarm Siren or any part of the Choice

Alert system is not operating correctly or as

described, please contact Customer Service for

assistance (1-800-654-8483).

Parts Check List

Identify all the parts before proceeding.

The Alarm Siren will increase your system’s sound. Use in

areas where the Control Center’s siren cannot be heard.

Adding a Alarm Siren

In order to link the Alarm Siren to the Control Center,

you will need to have the Alarm Siren and Control

Center near each other

Step 1 - Remove cover on bottom of the Alarm

Siren. Plug in the AC adapter. Insert the antenna and

slide mode switch to the ‘ON’ position.

Alarm Siren

Low Batt On Armed

2 - Screws

2 - Plastic anchors

AC Apapter

Plug-in for AC Adapter

Low Batt On Armed

ON/OFF LEARN

Plug-in for Antenna Adapter

Step 2 - Press and hold the Learn button

inside the Alarm Siren. The ‘ON’ indicator on

the front will begin to ﬂash and it will sound

continuious beeps.

Step 3 -While continuing to press the Learn

button on the Alarm Siren, press and hold

the Mute button on the side of the Control

Center for three seconds. The Control

Center will send a test signal to the Alarm

Siren. When the Alarm Siren receives the test

signal it will sound a long tone and the ‘ON’

indicator will stop ﬂashing.

Step 4 - Release all buttons

This indicates the Alarm Siren has been linked with the

Control Center. Replace cover to Alarm Siren.

Test the Alarm Siren

Step 1 - After the Alarm Siren has been successfully

linked with the Control Center press and hold the

Mute button on the Control Center for three seconds.

Step 2 - When the Alarm Siren receives the test

signal from the Control Center, one LED indicator

on the Alarm Siren will begin to ﬂash. It will continue

to ﬂash for 30 seconds. This indicates it has received

the test signal.

Installation

Turn the Alarm Siren over and adjust the triangle hang

tags as shown in digram (1). After you have turned the

triangle hang tags into the correct position, now you

are ready to install. Find the place that you would like

to hang the Alarm Siren. Use the screws included for

Alert

Chime

Off

Mute

Learn

Input DC 12V

wood, or the screws and anchors included for

drywall mounting, as shown in diagram (2).

Erasing the Alarm Siren from the system

Step 1 - Remove the AC Adapter and battery from

the Alarm Siren.

Step 2 - With the AC Adapter and battery removed,

press and hold the Learn button.

Step 3 - While pressing the Learn button, re-install

AC Adapter. The LEDs will ﬂash rapidly and the

Alarm Siren will sound beeps. This indicates the

Alarm Siren has been removed from the system.

Step 4 - Release all buttons

Wood (screws only) -

Drywall (screws & anchors) -

Wood (screws only) -

Drywall (screws & anchors) -

Model # Description Battery Type Battery Life*

45129 Control Center (4) “AAA” 24 months

45136 Alarm Siren (1) “9V” 24 months

*maximum potential life based upon usage and location

Low Battery Indicator

The Alarm Siren offers battery back-up using a “9V”

battery. Remove screws marked with arrows on

back and attach battery to tab according to polarity

markings. When the battery voltage reaches a low

level, the “Low battery” LED indicator on the front will

begin to ﬂash until battery is replaced. If the battery is

not installed the “Low battery” LED indicator will

remain on.

WARNING!

Risk of personal injury

- Prolonged exposure to alarm siren may cause permanent

hearing loss

Battery Warning!

- Remove battery before storing the Alarm or Sensor for

extended periods

- Battery may leak harmful liquids or ignitable materials or

explode causing injury and product damage

- Do not mix old and new or other battery types

- Replace fully discharged battery immediately

CAUTION!

- Do not mount in wet locations

- Do not run Adapter cable through wall

FCC Warning

Any unauthorized changes or modiﬁcations to the equipment

would void the user’s warranty and may conﬂict with both

state and federal laws. The Choice Alert system complies with

part 15 of the FCC rules. Operation is subject to the following

conditions:

1) The Choice Alert system may not cause

harmful interference.

2) The Choice Alert system may accept any interference

received including interference that may cause

undesired operation.

NOTE: This equipment has been tested and found to

comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more

of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment

and receiver.

– Connect the equipment into an outlet on a circuit

different from that to which the receiver

is connected.

– Consult the dealer or an

experienced radio/TV technician for help

Table des matières

Autres manuels GE Système de sécurité

GE DeluxeDoorAlarm Manuel utilisateur

GE Interlogix 60-875 Simon Manuel utilisateur

GE JSC1300 Manuel utilisateur

GE NX-10 Manuel utilisateur

GE Interlogix 60-875 Simon Manuel utilisateur

GE AS272 Manuel utilisateur

GE Allegro 60-874-95R Manuel utilisateur

GE SIMON XT Manuel utilisateur

GE 4 Series Manuel utilisateur

GE Concord 4 Manuel d'instructions

GE AS610RF Manuel utilisateur

GE AL-1291 Point ID Manuel utilisateur

GE 50246 - Smart Home Door Stop Alarm Manuel utilisateur

GE Simon Security System Manuel utilisateur

GE Simon XTi Manuel utilisateur

GE ARITECH AS399 Manuel utilisateur

GE ActiveKEY Manuel utilisateur

GE SuperBus 2000 Manuel utilisateur

GE Supra KeySafe Manuel utilisateur

GE Concord 4 Manuel d'instructions

GE 45133 Manuel utilisateur

GE 45413 Manuel utilisateur

GE CareGard Manuel utilisateur

GE SmartHome Series Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur