GE Profile Advantium SCB2001KSS Manuel

Note: Cabinets installed adjacent to wall ovens must have an

adhesion spec of at least a 194°F temperature rating.

Most 30" Wall Cabinets can be used with this unit.

Note: 2" minimum between cutouts when installed above

warming drawer or single wall oven.

Installation Information: Before installing, consult installation

instructions packed with product for current dimensional data.

For answers to your Monogram,® GE Profile™or

GE®appliance questions, visit our website at

ge.com or call GE Answer Center®service,

800.626.2000.

Listed by

Underwriters

Laboratories

SCB2001K

GE Profile Advantium®Wall Oven

Advantium_Install_dim.eps

Cutout width

28-1/2"

Required

cutout location

36-3/4"

minimum

from floor

Junction

box

location

A=Allow 1" overlap of oven over top and bottom edges of cutout.

B=Allow 11/16"-3/4" for overlap of oven over side edges of cutout.

4-3/16

21"

Cutout height

19"

Cutout depth

29-25/32

21-7/8

15-27/32"

Excluding

Handle

Advantium Wall Oven Dimensions (in inches)and

Cabinet Installation (in inches)

Note: Cabinets installed adjacent

to wall ovens must have an adhesion

spec of at least 194° F temperature rating.

Construct Solid

Bottom Min.

3/8" Plywood

Supported by

2 x 4 or 1 x 2

Runners, all

Four Sides.

(Must Support

150 lbs.)

Conduit

(48-1/2"

long)

AAllow 1" overlap of oven over top and bottom edges of cutout

BAllow 11/16"-3/4" for overlap of oven over side edges of cutout

240440

Specification Revised 2/07

Dimensions and Installation Information (in inches)

Listed by

Underwriters

Laboratories

For answers to your Monogram,® GE Profile™or

GE®appliance questions, visit our website at

ge.com or call GE Answer Center®service,

800.626.2000.

SCB2001K

GE Profile Advantium®Wall Oven

Single

Speedcook Installation

Speedcook Oven Installation

above a single GE Built-In Wall Oven

Speedcook Oven Installation

above a GE Warming Drawer

36-3/4 Min.

Required

Min

Construct Solid

Bottom Min. 3/8"

Plywood

Supported by

2 x 4 or 1 x 2

Runners, all

Four Sides

28-1/2

530Dia3

36-3/4 Min.

530Dia13

Min.

Construct Solid

Bottom Min. 3/8"

Plywood

Supported by

2 x 4 or 1 x 2

Runners, all

Four Sides

2 Min.

Install

2 x 4 or 2 x 2

Runners or

Solid Bottom,

Must Support

100 lbs.

28-1/2

9-1/4

*45-1/

530Dia4

Min.

Construct Solid

Bottom Min. 3/8"

Plywood

Supported by

2 x 4 or 1 x 2

Runners, all

Four Sides

2 Min.

Per Oven

Requirement

28-1/2

240440

Specification Revised 2/07

Dimensions and Installation Information (in inches)

Order a 30” wide single oven cabinet or cut the

opening in a wall to dimensions shown.

Note: The rough opening must be:

• Depth – 19” Min.

• Width – 28-1/2” Min.

• Height – 21” Min.

• 36-3/4” from the floor to the cutout is required.

• These ovens require 3/4” overlap on each side,

top and bottom of the cutout.

• Oven overlaps will conceal cut edges on all sides

of the opening.

Note: For installation above a warming drawer

additional clearance between the two cutouts

may be required. Check to be sure the oven

supports above the Warming Drawer location

do not obstruct the required interior 23-1/2” depth

and 9-1/4” height.

Installation Information: Before installing, consult

installation instructions packed with product for

current dimensional data.

Features and Benefits

• Speedcook Technology – Delivers oven-quality food up to eight times faster than

a conventional oven

• Multiple Cooking Modes – Bakes, broils, browns, roasts, microwaves and grills fast,

with no preheating

• Over 100 Pre-Programmed Menu Items, Manual Cook, Help and Demo Modes

• Sensor Cooking Controls – Automatically adjust the time and power for exceptional

cooking results

• Auto and Time Defrost – Automatically defrosts for a specified amount of time

• Halogen Interior Light – Helps you monitor food as it cooks

• Two-Line Bilingual Scrolling Display – Provides helpful cooking tips and oven-use

instructions in easy-to-read English or Spanish

• Stainless Steel Interior – Durable surface that cleans quickly with a simple wipe

of the towel

• Model SCB2001KSS – Stainless steel

SCB2001K

GE Profile Advantium®Wall Oven

240440

Specification Revised 2/07

Ce manuel convient aux modèles suivants

Table des matières

Manuels Four populaires d'autres marques

Bosch

Bosch HVA531NS0 Manuel utilisateur

Electrolux

Electrolux EOF6P46X Manuel utilisateur

NEFF

NEFF B44S32 5GB Series Manuel utilisateur

Combi

Combi BLODGETT BC142GDS Manuel utilisateur

AEG

AEG COMPETENCE 311704300 Manuel utilisateur

Falcon

Falcon DOMINATOR PLUS G3106 Series Guide de l'utilisateur

Rational

Rational SCC WE 61G Manuel utilisateur

Smeg

Smeg DOSPA38X Manuel d'installation et d'exploitation

Electrolux

Electrolux air-o-convect 20 GN 2/1 Manuel utilisateur

Miele

Miele HR 1954-2 Manuel utilisateur

KHIND

KHIND OT50 Manuel utilisateur

Henny Penny

Henny Penny Smoker Box Manuel utilisateur

Lang

Lang ECOD-AP Manuel utilisateur

AEG

AEG BEK455310M Manuel utilisateur

Frigidaire

Frigidaire FNGE90JGR Manuel utilisateur

Hotpoint

Hotpoint FE9 S831 JSH IX Manuel utilisateur

AEG

AEG DE401301DM Manuel utilisateur

DeLonghi

DeLonghi XA660 Manuel