GE TLE Scalable 150 Manuel utilisateur
Logix Series Quick Start Guide
150
Stainless Steel Control Valve
2
Progra mming Your Control
General Program Reference Guide
To Change a Value:
• Use or to select value to change.
• Then press until value blinks.
• The use or to scroll through value
options.
• Then press to enter value.
NOTE: A locked value ( ) cannot be changed until it is
unlocked.
To Star t Manual Regeneration:
• Press for regeneration today .
• Hold for 5 seconds for immediate regeneration.
During a Regeneration:
• Press or or to view current cy cle
time remaining.
• Press AND to advance cy cles.
• Hold AND for 5 seco nds to cancel
regeneration.
To Program Individual Cy cle T imes:
Note: Only required to override current settings.
• Hold AND for 5 seco nds.
• Then use or to scroll through cycles.
C1= Backwash
C2 = Regenerant Draw
C3 = Slow Rinse
C5 = Fast Rinse
C8 = Regenerant Refill
• Then press until value blinks.
• Then use or to scroll.
• Then press to enter value.
Setting the 7-Day Clock (742 and 742F only)
• Set the Days Override to "0".
• W ith arrow on “Regen Time/Day, press until
arrow flashes under desired day of week.
• Then use or until black bar is displayed
indicating regeneration that day.
• Press to advance to next day.
To Reset the Valve Type:
NOTE: All values are reset to factory defaults.
• Hold AND for 5 seco nds.
• When “HO” is displayed, hold for 5 seconds.
• Then press or to change valve type.
• Then press to enter displayed valve type.
SET
UP
DOWN
REGEN
LOCKED VALUE
Time& Day
RegenTime & Day
Salt
SU MO TU WE TH FR SA DAYS
LBS
PM
MIN
KG
x100
x2
P
H
C
Capacity
Hardness
Control:
Syst em Type:
Use Page:
762
Time/Day
Regeneration Time/Day
Salt Amount
Capacity
Hardness
4-Cycle
Conditioner
3
742
Time/Day
Regeneration Time/Day
Salt Amount
Capacity
4-Cycle
Conditioner
4
762F
Time/Day
Capacity
Backwash Time/Day
Backwash Length
3-Cycle
Filter
5
742F
Time/Day
Backwash Time/Day
Backwash Length
3-Cycle
Filter
6
Regeneration StartMetered Clock or Remote Signal Metered Clock or Remote Signal
Identify your control
by matching the
display text to the
guide
150 Quick Start
3
Grains/gal:3
to
200
SU MO TU WE TH FR SA DAYS
SU MO TU WE TH FR SA DAYS
SU MO TU WE TH FR SA DAYS
SU MO TU WE TH FR SA DAYS
SU MO TU WE TH FR SA DAYS
SU MO TU WE TH FR SA DAYS
SU MO TU WE TH FR SA DAYS
Lbs/ft3
SU MO TU WE TH FR SA DAYS
KG
Time/Day
Salt Amount
SU MO TU WE TH FR SA DAYS
Capacity
Hardness
Time/Day
Regeneration Time/Day
Salt Amount
SU MO TU WE TH FR SA DAYS
Capacity
Hardness
1. Valve Type
Select 150 for 4-Cycle Single tank conditioner
or
Select 2150 for 4-Cycle Twin-Alternating conditioner
2. Resin Volume
Select correct resin volume Cubic feet: 3.00
to
17.00
3. Time of Day (12 hr.)
Set to actual time of day
Note: Setting includes PM indicator.
4. Day of Week
Set to actual day of the week
5. Time of Regeneration
Set to desired time of regeneration
Note: Time of Regeneration is ignored for Twin-alternating.
6. Days Override
Leave at 0 to disable
or
Set to desired days override
7. Salt Dosage
Set to desired dosage
lbs per cubic feet of resin
8. Capacity
Estimated exchange capacity
calculated by Logix control
Use to OVERRIDE calculated
capacity
9. Hardness
Set to actual water hardness
Screen Buttons to Description Range
Press
0
to
99
Lbs/f
t3
: 3
to
18
Kilograins:1
to
9999
Programmming is complete
or
press
then
or
press
then
or
press
press
then
or
press
press
then
or
press
press
then
or
press
press
then
or
press
press
then
or
press
press
then
press
or
press
press
then
to override
Service Display
Toggles between Capacity Remaining
(gallons or m ) and Flow Rate (g/m
or L/m)
150 Demand 762 4-Cycle Conditioner
PM
Max. Days
Between Regen:
In Service LED is On
In Service
3
Grams/Liter: 30
to
2000
grams/Liter: 50
to
290
Kilograms:0.1
to
999.9
Liters:75
to
500
Time/Day
Salt Amount
Capacity
Hardness
Time/Day
Salt Amount
Capacity
Hardness
Time/Day
Salt Amount
Capacity
Hardness
Time/Day
Salt Amount
Capacity
Hardness
Time/Day
Salt Amount
Capacity
Hardness
Time/Day
Salt Amount
Capacity
Hardness
Time/Day
Salt Amount
Capacity
Hardness
Time/Day
Salt Amount
Capacity
Hardness
Regeneration Time/Day
Regeneration Time/Day
Regeneration Time/Day
Regeneration Time/Day
Regeneration Time/Day
Regeneration Time/Day
Regeneration Time/Day
Regeneration Time/Day
Regeneration Time/Day
4
SU MO TU WE TH FR SA DAYS
SU MO TU WE TH FR SA DAYS
SU MO TU WE TH FR SA DAYS
SU MO TU WE TH FR SA DAYS
SU MO TU WE TH FR SA DAYS
SU MO TU WE TH FR SA DAYS
SU MO TU WE TH FR SA DAYS
KG
SU MO TU WE TH FR SA DAYS
2. Resin Volume
Select correct resin volume Cubic feet: 3.00
to
17.00
3. Time of Day (12 hr.)
Set to actual time of day
Note: Setting includes PM indicator.
4. Day of Week
Set to actual day of the week
5. Time of Regeneration
Set to desired time of regeneration
6. Days Between Regeneration
Set to desired days between
regeneration
or
Set at 0 to program as a 7-day
timer
7. Salt Dosage
Set to desired dosage
8. Estimated Exchange Capacity (view only)
Based on resin volume and
salt setting
Screen Buttons to Description Range
Press
Days:0
to
99
Lbs/ft3:3
to
18
Programmming is complete
or
press
then
or
press
then
or
press
press
then
or
press
press
then
or
press
press
then
or
press
press
then
or
press
press
then
press
Service Display
Displays actual day of the week
and time of day
PM
PM
150 Time Clock 742 4-Cycle Conditioner
1. Valve Type
Select 150 for 4-Cycle Single tank conditioner
or
Select 2150 for 4-Cycle Twin-Alternating conditioner
Time/Day
Salt Amount
SU MO TU WE TH FR SA DAYS
Capacity
In Service LED is On
In Service
Grams/Liter: 50
to
290
Liters:75
to
500
Time/Day
Salt Amount
Capacity
Time/Day
Salt Amount
Capacity
Time/Day
Salt Amount
Capacity
Time/Day
Salt Amount
Capacity
Time/Day
Salt Amount
Capacity
Time/Day
Salt Amount
Capacity
Time/Day
Salt Amount
Capacity
Lbs/ft3
Time/Day
Salt Amount
Capacity
Regeneration Time/Day
Regeneration Time/Day
Regeneration Time/Day
Regeneration Time/Day
Regeneration Time/Day
Regeneration Time/Day
Regeneration Time/Day
Regeneration Time/Day
Regeneration Time/Day
5
SU MO TU WE TH FR SA DAYS
SU MO TU WE TH FR SA DAYS
SU MO TU WE TH FR SA DAYS
SU MO TU WE TH FR SA DAYS
SU MO TU WE TH FR SA DAYS
Time/Day
SU MO TU WE TH FR SA DAYS
Capacity
SU MO TU WE TH FR SA DAYS
SU MO TU WE TH FR SA DAYS
2. Program Type
Select "F"
3. Time of Day (12 hr.)
Set to actual time of day
Note: Setting includes PM indicator.
4. Day of Week
Set to actual day of the week
5. Time of Backwash
Set to desired time of backwash
Note: Time of Backwash is ignored for Twin-alternating.
6. Days Override
Leave at 0 to disable
or
Set to desired days override
7. Backwash Length (minutes)
Set to desired backwash length
8. Capacity (gallons)
Set to desired capacity in
Screen Buttons to Description Range
Press
0
to
99
Minutes:1
to
250
Gallons:1
x 100
to
9999
Programmming is complete
or
press
then
press
or
press
press
then
or
press
press
then
or
press
press
then
or
press
press
then
or
press
press
then
or
press
press
then
PM
Backwash Time/Day
Backwash Length
MIN
X100
150 Demand 762F - 3-Cycle Filter
1. Valve Type
Select 153 for 3-Cycle Single tank filter
or
Select 2153 for 3-Cycle Twin-Alternating filter
Max. Days
Between Regen:
m3:1
to
999.9
Time/Day
Capacity
Backwash Time/Day
Backwash Length
Time/Day
Capacity
Backwash Time/Day
Backwash Length
Time/Day
Capacity
Backwash Time/Day
Backwash Length
Time/Day
Capacity
Backwash Time/Day
Backwash Length
Time/Day
Capacity
Backwash Time/Day
Backwash Length
Time/Day
Capacity
Backwash Time/Day
Backwash Length
Time/Day
Capacity
Backwash Time/Day
Backwash Length
SU MO TU WE TH FR SA DAYS
Service Display
In Service
Time/Day
Capacity
Backwash Time/Day
Backwash Length
Toggles between Capacity Remaining
(gallons or m ) and Flow Rate (g/m
or L/m)
In Service LED is On
3
6
Time/Day
SU MO TU WE TH FR SA DAYS
SU MO TU WE TH FR SA DAYS
SU MO TU WE TH FR SA DAYS
SU MO TU WE TH FR SA DAYS
SU MO TU WE TH FR SA DAYS
SU MO TU WE TH FR SA DAYS
SU MO TU WE TH FR SA DAYS
SU MO TU WE TH FR SA DAYS
2. Program Type
Select "F"
3. Time of Day (12 hr.)
Set to actual time of day
Note: Setting includes PM indicator.
4. Day of Week
Set to actual day of the week
5. Time of Backwash (12 hr)
Set to desired time of backwash
6. Days Between Regeneration
Set to desired days between
regeneration
or
Set to 0 to program as a 7-day
timer
7. Backwash Length (minutes)
Set to desired backwash length
Screen Buttons to Description Range
Press
Days:0
to
99
Minutes:1
to
250
Programmming is complete
or
press
then
press
or
press
press
then
or
press
press
then
or
press
press
then
or
press
press
then
or
press
press
then
Service Display
Displays actual day of week and
time of day.
PM
Backwash Time/Day
Backwash Length
MIN
PM
150 Time Clock 742F - 3-Cycle Filter
1. Valve Type
Select 153 for 3-Cycle Single tank filter
or
Select 2153 for 3-Cycle Twin-Alternating filter
In Service LED is On
Time/Day
Backwash Time/Day
Backwash Length
Time/Day
Backwash Time/Day
Backwash Length
Time/Day
Backwash Time/Day
Backwash Length
Time/Day
Backwash Time/Day
Backwash Length
Time/Day
Backwash Time/Day
Backwash Length
Time/Day
Backwash Time/Day
Backwash Length
Time/Day
Backwash Time/Day
Backwash Length
© Copyright 2007 General Electric Company
Printed in U.S.A. P/N 3017534 Rev. B
Ce manuel convient aux modèles suivants
1
Autres manuels GE Unité de contrôle
GE
GE IC3645SR7T405T5 Manuel utilisateur
GE
GE L60 Manuel utilisateur
GE
GE B90 Manuel utilisateur
GE
GE CR194 Manuel utilisateur
GE
GE GEH-5201 Manuel utilisateur
GE
GE C-400 Series Manuel utilisateur
GE
GE Tetra GECLPS5-2 Manuel utilisateur
GE
GE ReliaGear LV MCC Manuel utilisateur
GE
GE Evolution Series E9000 Manuel utilisateur
GE
GE NX-1710E - Single Door Control Module Manuel d'installation et d'exploitation
GE
GE IC3645SR4W606N6 Manuel du propriétaire
GE
GE C-800 Series Manuel utilisateur
GE
GE 10000 Manuel utilisateur
GE
GE Masoneilan 48000 Series Manuel utilisateur
GE
GE IC695ETM001 Manuel utilisateur
GE
GE RX3i PROFINET Manuel utilisateur
GE
GE IC3645SR4W746N5 Manuel utilisateur
GE
GE PACSystems RX3i IC695ETM001-JW Manuel utilisateur
GE
GE MiCOM P40 Agile Manuel utilisateur
GE
GE MiCOM P40 Agile Manuel utilisateur
Manuels Unité de contrôle populaires d'autres marques
Festo
Festo Compact Performance CP-FB6-E Manuel de la liste des pièces
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur
JS Automation
JS Automation MPC3034A Manuel utilisateur
JAUDT
JAUDT SW GII 6406 Series Guide rapide
Spektrum
Spektrum Air Module System Manuel utilisateur
BOC Edwards
BOC Edwards Q Series Manuel utilisateur
