GCX 7000-MS3 Manuel utilisateur

DU-CAP-0002-67 Rev A 2/16/16 GCX Corp Page 1 of 3



Item # Description Qty.



3875 Cypress Drive Petaluma, CA 94954 800.228.2555 707.773.1100 Fax 707.773.1180 www.gcx.com



Installation

Guide



Roll Stand Post Mount for 75mm VESA Data Capture Devices on Welch Allyn

7000-MS3 Roll Stand



(Refer to qualified

personnel)



Purpose: To describe installation of Post Mounting Assembly to Welch Allyn Roll Stand 



The purpose of this manual is to describe general installation of Post Mounting Assembly to Welch Allyn

Roll Stand. This manual should be used in conjunction with any instrument-specific installation guides.

Please read this manual and all instrument-specific installation material before installing or using this

product.







Parts Reference

The following parts and hardware are included in this installation kit:



(Hardware not shown)













Tools Required:



3/16” Hex Wrench (Provided)

5/32 Hex Wrench (Provided)

Phillips Screwdriver (Not Provided)



2X 1/2"/13mm Wrench (Not Provided)



Ensure that the weight of the instrument being mounted does not exceed the load

rating limit of 10lb. Failure to do so may result in damage to equipment or injury.

3 3

Post Mounting Assembly

Cable Clip

Clamping Block

4 10-32 X 5/8 Socket Head Cap Screw 2

5 M4 X 8mm Pan Head Machine Screws 4

DU-CAP-0002-67 Rev A 2/16/16 GCX Corp Page 2 of 3







 



1 2

2X 10-32 x 5/8” SHCS

5/32” Hex Wrench

4X M4 x 8mm PHMS

5 6

Maximum Height 3.25”/8.2cm.

Setting height above this level may

result in damage to equipment or injury

Maximum Height 8”/20.32cm.

Setting height above this level may

result in damage to equipment or injury

3/16” Hex Wrench

2X 1/2”/13mm Wrench

DU-CAP-0002-67 Rev A 2/16/16 GCX Corp Page 3 of 3



Routine Maintenance

Periodically inspect all fasteners associated with the mounting assembly. Tighten or Adjust as

necessary for optimal operation and safety.

Cleaning the Mounting Assembly

The mounting assembly may be cleaned with most mild, non-abrasive solutions commonly used in

the hospital environment (e.g. diluted bleach, ammonia, or alcohol solutions).

The surface finish will be permanently damaged by strong chemicals and solvents such as acetone

or trichloroethylene.

Steel wool or other abrasive material should never be used.

Damaged caused by the use of unapproved substances or processes will not be warranted. We

recommend testing of any cleaning solution on a small area of the mounting assembly that is not

visible to verify compatibility.

Never submerge or allow liquids to enter the mounting assembly. Wipe any cleaning agents off the

mounting assembly immediately using a water-dampened cloth. Dry the assembly thoroughly after

cleaning.



CAUTION: GCX makes no claims regarding the efficacy of the listed chemicals or processes as a

means for controlling infection. Consult your hospital’s infection control officer or epidemiologist. To

clean or sterilize mounted devices or accessory equipment, refer to the specific instructions delivered

with those products.



Table des matières

Autres manuels GCX Support et étagère

GCX

GCX Variable Height Roll Stand with Storage Bay Manuel utilisateur

GCX

GCX LiDCO Manuel utilisateur

GCX

GCX VHM Series Manuel utilisateur

GCX

GCX RS-0006-64 Manuel utilisateur

GCX

GCX Kaiser NFS Manuel utilisateur

GCX

GCX MP5 Instructions d'utilisation et d'entretien

GCX

GCX M Series Manuel utilisateur

GCX

GCX KP-0003-28 Manuel utilisateur

GCX

GCX VHM-P Manuel utilisateur

GCX

GCX DU-FLP-0001-10 Manuel utilisateur

GCX

GCX M Series Manuel utilisateur

GCX

GCX VHM Series Manuel utilisateur

GCX

GCX VHM Series Manuel utilisateur

GCX

GCX FLP-0002-17 Manuel utilisateur

GCX

GCX VHM-P Manuel utilisateur

GCX

GCX FLP-0008-11 Manuel utilisateur

GCX

GCX VHM Series Manuel utilisateur

GCX

GCX DR-0015-20 Instructions d'installation

GCX

GCX AG-0019-07 Manuel utilisateur

GCX

GCX FLP-0008-53 Manuel utilisateur

GCX

GCX PH-0062-01 Manuel utilisateur

GCX

GCX VHM Manuel utilisateur

GCX

GCX AG-0021-100 Manuel utilisateur

GCX

GCX Mindray V Series Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur