GASTRON GTL-200L Manuel utilisateur

GTL-200

Instruction Manual

Headquarters / Engineering research laboratory :

23 Gunpo Advance d Industry 1-ro(Bugok-dong), Gunpo-si, Gyeonggi-do

Tel +82-31-490-0800 Fax +82-31-490-0801

Yeongnam business office / Plant :

55 Gonghangap-gil, 85beon-gil, Gangseogu, Busan Metropolitan City

Tel +51-973-8518 Fax +51-973-8519

E-mail : [email protected]

www.gastron.com

Read in detail for correct use.

Gas & Flame

Detection System

GTL-200

Instruction Manual

www.gastron.com

02_03

When abnormalities occur after purchasing the product,

please contact the following address.

· Address : 23 Gunpo Advanced Industry 1-ro,

Gunpo-si, Gyeonggi-do

· Tel : 031-490-0800

· Fax : 031-490-0801

· URL : www.gastron.com

· e-mail : [email protected]

Thank you very much for purchasing a product from Gastron Co. Ltd.

Our Gastron Co.Ltd. is a company specialized in Gas Detector & Gas Monitoring System and have been

recognized by many customers for the best quality and use convenience. We always seek to help our

customers to find the product they need and we continuously research to develop gas detectors that satisfies

our customers. From now on, you can solve all problems related to gas detectors with the products of

Gastron. We Gastron will be responsible for your satisfaction.

This user manual describes operation and simple maintenance methods etc. for the gas detector. Please read

carefully and store it in a safe place. Using it as a reference will help a lot when you have a question during

use.

The product and manual are subject to change without a notice for the product's functional improvement and ease of use.

■Onlyanindividualspecializedinexplosion-proofdevicesandwarninglightsmaydisassemble

the device.

■Pleasecontactourcompany'stechnicalsupport,e-mail,orwebsiteforinquiriesrelatedto

inspection and calibration of the explosion-proof warning light.

Greetings

6. Drawings and Dimensions········································································································································ 18

6.1. Combination Type ·················································································································································· 18

6.2. Sounder Type·························································································································································· 19

6.3. Beacon Type ··························································································································································· 20

7. Precautions during Installation ································································································································ 21

Appendix A. Sound Tone Table····································································································································· 22

Appendix B Method to Set Tone··································································································································· 24

8. Revision History··························································································································································· 26

www.gastron.com

04_05

ContentsContents

1. Overview ······································································································································································ 6

2. Specification ································································································································································ 6

2.1. Basic Specifications············································································································································ 6

2.2. Mechanical Specifications ································································································································· 7

2.3. Electrical Specifications(DC Type)······················································································································ 7

2.4. Electrical Specifications (AC Type)····················································································································· 8

2.5. Environmental Specifications ···························································································································· 8

3. Name and description of each part ························································································································ 9

3.1. Combination Type Components ······················································································································· 10

3.2. Sounder Type Components······························································································································· 11

3.3. Beacon Type Components································································································································· 12

4. Installation···································································································································································· 14

4.1. Detachment of Cover ········································································································································ 14

4.2. Combination & Sounder Type Terminal Configuration ···················································································· 15

4.2.1. AC Type Terminal Description················································································································· 15

4.2.1. DC Type Terminal Description················································································································· 15

4.3. Beacon Type Terminal Configuration ················································································································ 15

4.3.1. AC Type Terminal Description················································································································· 15

4.3.2. DC Type Terminal Description················································································································· 15

5. Operation Method ····················································································································································· 16

5.1. Operation Status Setting ··································································································································· 16

5.2. External Contact Point Control·························································································································· 16

5.2.1. Dry Contact Configuration ····················································································································· 17

5.2.2. Wet Contact Configuration ···················································································································· 17

GTL-200

Instruction Manual

www.gastron.com

06_07

2. Specication

GTL-200 explosion-proof warning light uses semi-permanent LED light source and has aluminum housing. It is an

explosion-proof product with excellent durability and safety.

With Gastron's unique lens-type lighting system, it has high emission effect of optical signal. Using built-in switches,

sound type, speaker volume, and rotation speed of reflector can be adjusted, thus they can be changed in accordance to

installation condition.

LED has 4 colors; Red, Yellow, Green, and Blue and the max. volume of the speaker is 120 dB. 64 different sound tones

can be selected and external contact is operated by Dry & Wet Contact Method.

3 types of product are available; combination type with speaker and LED combined together, sounder type with speaker

operation only, and beacon type with LED operation only.

GTL-200 explosion-proof warning light has explosion-proof enclosure and is a product that can be used in combination

of stand-alone beacon, speaker, and combination types, etc.

2.2. Mechanical Specifications

ITEMS SPECIFICATION

Explosion-Proof Type Explosion-Proof Enclosure

Cable Inlet 3/4" PF ( 1/2" or 3/4" NPT )

Mounting Holes Ø 7 ±0.1

Size (Dimension) (mm)

Sounder 164(W) * 139(H) * 322(177)(D)

Beacon 164(W) X 278.5(H) X177(D)

Combination 164(W) * 278.5(H) * 322(177)(D)

Weight

Sounder App. 5.0kg

Beacon App. 5.0kg

Combination App. 6.2kg

Body Material Lamp Cover Explosion-Proof Tempered Glass

Body ALDC12

2.3. Electrical Specifications(DC Type)

ITEMS SPECIFICATION

Input Voltage

※CustomersuppliedPSUmustmeetrequirements

IEC1010-1 and CE Marking requirements.

Absolute min:

Nominal:

Absolute max:

Ripple maximum allowed:

18V

24V

30V

0.1V pk-pk

Sounder Wattage Max. wattage:

Max. current:

17.8W@+24VDC

0.74A@+24VDC

Beacon Wattage Max. wattage:

Max. current:

5.1W@+24VDC

0.21A@+24VDC

Combination Wattage Max. wattage:

Max. current:

19.2W@+24VDC

0.8A@+24VDC

EMC Protection: CE

2. Specication

1. Overview

GTL-200

Instruction Manual

2.1. Basic Specifications

ITEMS SPECIFICATION

Display Method LED light source with a rotating reflector

Display Color Option Red, Yellow, Green, Blue

Sound Maximum output Normal 110dB@1meter(1.2KHz)

Max 120dB@1meter(1.2KHz)

Tone Selection 64 user selectable tones

Approvals Classification ExdⅡCT4~T6

EN 61000-6-2 , EN 61000-6-4

Ingress Protection IP66

Product Type

Sounder

Beacon

Combination

Warranty 2Year

www.gastron.com

08_09

3. Name and Description of Each Part

3.1. Combination Type Components

[Figure 1. Combination Type Configuration]

2. Specication

GTL-200

Instruction Manual

2.4. Electrical Specifications (AC Type)

ITEMS SPECIFICATION

Input Voltage

※CustomersuppliedPSUmustmeetrequirements

IEC1010-1 and CE Marking requirements.

Absolute min:

Nominal:

Absolute max:

Ripple maximum allowed:

210V

220V

230V

0.1V pk-pk

Sounder Wattage Max. wattage:

Max. current:

19.7W@+220VAC

0.17A@+220VAC

Beacon Wattage Max. wattage:

Max. current:

4.7W@+220VAC

0.05A@+220VAC

Combination Wattage Max. wattage:

Max. current:

22W@+220VAC

0.2A@+220VAC

EMC Protection: CE

2.5. Environmental Specifications

ITEMS SPECIFICATION

Operation Temperature T5 -40to70℃

T6 -40to60℃

Storage Temperature -40to70℃

Operation Humidity 5 to 99% RH (Non-condensing)

No ITEMS SPECIFICATION

1Case Body Protects internal PCB and other parts by body.

2Case cover Protects internal parts by body.

3Case Glass Cover Protects internal glass and other parts by body.

4Explosion Light Glass It is an explosion-proof case made of glass material and disperse light to outside.

5Case Glass Ring Prevents diversion during explosion light glass fastening.

6Gasket Prevents diversion during explosion light glass fastening.

7O-Ring/1 Inhibits inlet of dust, particles, water, gas

8Reflector Diffracts LED light to emit.

9Reflector troll plate Works as rotating plate that rotates reflector.

10 Motor troll plate Works to deliver rotating speed of motor.

11 Motor Works to rotate reflector.

www.gastron.com

10_11

3.1. Combination Type Components

No NAME DESCRIPTIONS

12 Led assy plate(bracket) Fastens LED Assy to the body.

13 lens Lens for light source that emits LED light.

14 Heat sinking plane Heat-proof body that decreases LED temperature and increases lifetime.

15 Bearing washer Washer for bearing that operates rotating plate to decrease friction.

16 Heat sinking plane-Net Net that fastens heat-proof plate to LED assy plate (bracket)

17 Speaker Cover Protects internal Driver unit and other parts by body

18 FlameArrester∮25x2 Prevents entrance of debris and delivers buzzer sound to outside.

19 Driver unit Speaker that emits PCB signal sound.

20 Horn set Horn that enhances output of driver unit and prevents water from entering.

21 Cage Protective mesh for explosion light glass

22 Terminal PCB AC/DC Power Supply

23 Main PCB Operates by receiving signal upon an error in LED/speaker/motor

24 Led PCB PCB with LED

No NAME DESCRIPTIONS

1Case Body Protects internal PCB and other parts by body

2Case cover Protects internal parts by body

3O-Ring/1 Inhibits inlet of dust, particles, water, gas

4Speaker Cover Protects internal Driver unit and other parts by body

5FlameArrester∮25x2 Prevents entrance of debris and delivers buzzer sound to outside.

6Driver unit Speaker that emits PCB signal sound.

7Horn set Horn that enhances output of driver unit and prevents water from entering.

8Terminal pcb AC/DC Power Supply

9Main pcb Operates by receiving signal upon an error in LED/speaker/motor

10 Name plate lavel Label for Authentication

[Table 1. Combination Type Configuration Description]

GTL-200

Instruction Manual

3.2. Sounder Type Configuration

[Figure 2. Sounder Type Configuration]

[Table 2. Sounder Type Configuration Description]

3. Name and Description of Each Part3. Name and Description of Each Part

www.gastron.com

12_13

GTL-200

Instruction Manual

[Table 4. Beacon Type Configuration Description]

No NAME DESCRIPTIONS

1Case Body Protects internal PCB and other parts by body

2Case cover Protects internal parts by body

3Case Glass Cover Protects internal Glass and other parts by body

4Explosion Light Glass It is an explosion-proof case made of glass material and disperse light to outside.

5Case Glass Ring Prevents diversion during explosion light glass fastening.

6Gasket Prevents diversion during explosion light glass fastening.

7O-Ring/1 Inhibits inlet of dust, particles, water, gas

8Reflector Diffracts LED light to emit.

9Reflector troll plate Works as rotating plate that rotates reflector.

10 Motor troll plate Works to deliver rotating speed of motor.

11 Motor Works to rotate reflector.

12 Led assy plate(bracket) Fastens LED Assy to the body.

13 lens Lens for light source that emits LED light.

14 Heat sinking plane Heat-proof body that decreases LED temperature and increases lifetime.

15 Bearing washer Washer for bearing that operates rotating plate to decrease friction.

16 Heat sinking plane-Net Net that fastens heat-proof plate to LED assy plate (bracket)

17 Cage Protective mesh for Explosion Light Glass

18 Terminal pcb AC/DC Power Supply

19 Main pcb Operates by receiving signal upon an error in LED/Speaker/Motor

20 Led pcb set PCB with LED

3.3. Beacon Type Components

[Table 3. Beacon Type Configuration]

3. Name and Description of Each Part3. Name and Description of Each Part

www.gastron.com

14_15

4. Install4. Install

GTL-200

Instruction Manual

■Itisprohibitedforanindividual,otherthananapproveduseroratechnicianresponsibleforinstallationandrepair

from the head office, to install an explosion-proof warning light on site or open the cover of the installed warning

light and manipulate it. This may cause serious loss of life and property from fire, explosion, and etc.

■Inaddition,pleasecheckwhetherthereisanyremainingexplosivegasorcombustiblematerialinthe

surroundings. Power must be turned off before performing work.

4.1. Detachment of Cover

■Turntheslottedsetscrew(M4)fixingthecoverpartofmainbody3~4turnscounterclockwise(ccw)usingahex

wrench (M2) then turn the cover of gas leak detector ccw to detach the cover.

■Whenthebottomcoverisdetached,terminalboardforexternalwiringappears.Performcablewiringasshown

in the terminal configuration below.

[Figure 3. Slotted Set Screw Configuration]

No PCB SILK DESCRIPTION NOTE

1L1 AC Power (Live)

2L2 AC Power (Natural)

3S1 External Signal Line 1

Operates upon connecting "COM" terminal to a

desired signal line.

(Only supports Dry Contact Operation)

4S2 External Signal Line 2

5S3 External Signal Line 3

6COM Digital Ground

4.2.1. AC Type Terminal Description

4.2. Combination & Sounder Type Terminal Configuration

No PCB SILK DESCRIPTION NOTE

1 + DC + Power

2 - DC - Power

3S1 External Signal Line 1 For Dry Contact Operation, connect to "DC -"

power to run. For Wet Contact Operation, run

"S1~S3"and"DC-"

4S2 External Signal Line 2

5S3 External Signal Line 3

4.2.2. DC Type Terminal Description

4.3. Beacon Type Terminal Configuration

4.3.1. AC Type Terminal Description

No. PCB SILK DESCRIPTION

1L1 AC Power (Live)

2L1

3L2 AC Power (Natural)

4L2

4.3.2. DC Type Terminal Description

No. PCB SILK DESCRIPTION

1 + DC + Power

2 + DC + Power

3 - DC - Power

4 - DC - Power

5.1. Operation Status Setting

■Byusing#1to#6internaldipswitch,operatingtonecanbeselected.Fortypesoftone,refertothetonetablein

Appendix A.

■Byusing#7to#8internaldipswitch,operatingmodecanbechanged.

5.2.1. Dry Contact Configuration

■UsingCOMterminal,controlcontactstatusofS1~S3.

www.gastron.com

16_17

GTL-200

Instruction Manual

[Figure 4. Dry Contact Configuration]

5.2.2. Wet Contact Configuration

■UsingDC+power,selectS1~S3signal.

[Figure 5. Wet Contact Configuration]

5.2. External Contact Point Control

■Inordertoselectproductoperationandoutputtone,internalcontactpoints(S1~S3)ofwarninglightmustbe

controlled.

■Byusingapplicablecontactpoint,itcancontroloperationstatusandtoneoutput.Refertotheoperationstatus

setting table above for control mode.

■ForconfigurationofS1~S3fortoneoutput,refertoMethodforSettingToneinAppendixB.

■ContactpointcontrolconfigurationcanbesetinDryContactandWetContact.Operationconfiguration

depending on Contact Type is set to internal Jumper configuration and related items are as follows.

■ForMode1,performbasicwarninglightconfiguration.

■ForMode2,itisusedwhenpowerisinputtedregularlyandwhenitiscontrolledonlyusingexternalcontactpoints.

■ForMode3,itisamodetomanuallystoptoneoutputandusedduringsetting.

[Table 5. Operation Description]

Mode Dip Switch Setting Power On Input External Contact Point

(S1, S2, S3)

#7 #8

Mode1 OFF OFF Beacon operation and

set tone output N/A

Mode2 OFF ON No Operation Beacon operation and

set tone operation

Mode3 ON OFF Beacon Operation Set tone Operation

5. Operation Method5. Operation Method

www.gastron.com

18_19

GTL-200

Instruction Manual

6.1. Combination Type 6.2. Sounder Type

[Figure 6. Combination Type Drawing] [Figure 7. Sounder Type Drawing]

6. Drawings and Dimensions6. Drawings and Dimensions

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels GASTRON Détecteur de gaz

GASTRON

GASTRON GTD-1000Tx Manuel utilisateur

GASTRON

GASTRON GTC-520F Manuel utilisateur

GASTRON

GASTRON GTC-200A Manuel utilisateur

GASTRON

GASTRON GIR-3000 Manuel utilisateur

GASTRON

GASTRON GTD-1000T Series Manuel utilisateur

GASTRON

GASTRON GPD-100 Manuel utilisateur

GASTRON

GASTRON G-Finder Multi Manuel utilisateur

GASTRON

GASTRON GPD-100 Manuel utilisateur

GASTRON

GASTRON GTC-542 Manuel utilisateur

GASTRON

GASTRON GTC-550 Manuel utilisateur

GASTRON

GASTRON G-Finder GFS-100 Series Manuel utilisateur

GASTRON

GASTRON GTD-5000F Manuel utilisateur

GASTRON

GASTRON GTD-3000ExW Manuel utilisateur

GASTRON

GASTRON FS-310 Manuel utilisateur

GASTRON

GASTRON GTD-3000TxW Manuel utilisateur

GASTRON

GASTRON GTD-3000Ex Manuel utilisateur

GASTRON

GASTRON GTD-2000Tx Manuel utilisateur

GASTRON

GASTRON GTD-1000Ex Manuel utilisateur

GASTRON

GASTRON GTD-1000Tx Manuel utilisateur

GASTRON

GASTRON GTC-500 Series Manuel utilisateur

GASTRON

GASTRON GTD-2000Ex Manuel utilisateur

GASTRON

GASTRON GTD-2000TxW Manuel utilisateur

GASTRON

GASTRON GTD-5100F Manuel utilisateur

Manuels Détecteur de gaz populaires d'autres marques

Macurco

Macurco GD-6 Manuel utilisateur

Evikon

Evikon E2632 Manuel utilisateur

Critical Environment Technologies

Critical Environment Technologies CGAS-A Series Manuel utilisateur

MSA

MSA altair 5 Manuel utilisateur

DOD Technologies

DOD Technologies ChemLogic CL96 Manuel utilisateur

DEGA

DEGA NS III LCD Series Manuel utilisateur

RKI Instruments

RKI Instruments 35-3001A-08-01 Manuel utilisateur

PEMTECH

PEMTECH PT2008 Series Manuel utilisateur

Coster

Coster RGS 328 Manuel utilisateur

Sygonix

Sygonix 2483186 Manuel utilisateur

Perry

Perry 1GA 50917MET/P Manuel utilisateur

isweek

isweek AS8900 Manuel utilisateur

Oldham

Oldham OLC 10 Manuel utilisateur

Wizmart

Wizmart NB983 Manuel utilisateur

Beacon

Beacon MEGA Manuel

RKI

RKI GX-6000 Manuel utilisateur

Dräger

Dräger PIR 7000 Manuel utilisateur

GDS

GDS GASMAX EC Manuel utilisateur