GASTRON FS-310 Manuel utilisateur

Flame & Gas Detector design, development, production, installation, and additional service

DOC NO.GT-069IM00K

FS-310

Instruction Manual

Revision: 1.4

Please read carefully for proper use.

FS-310 Instruction

Manual

PAGE 2 of 10

Rev 1.4(2021.05.24)

We sincerely thank you for purchasing a Gastron product.

As a company specializing in Flame & Gas detectors and F&G Monitoring Systems, we at

Gastron is being recognized by many consumers for our high quality and convenience of use.

We are constantly researching and exerting our efforts to develop Flame & Gas detectors

satisfying our customers, and making sure our consumers always find a product they want.

From now on, solve all your problems regarding Flame & Gas detectors with Gastron products.

We at Gastron will take charge and satisfy all of you.

This user manual contains information on how to operate and maintain FS-310. After reading

the manual carefully, store it at a convenient location and refer to it whenever you have

questions while using the product.

If something abnormal occurs after purchasing our product, please contact the following

address.

Address: Gastron Co., Ltd. 23, Cheomdansaneop 1 ro, Gunpo city, Gyeonggin province

Tel: +82-31-490-0800

Fax: +82-31-490-0801

URL : www.gastron.com

e-mail : gastron@gastron.com



Note

• For accurate operation of Flame Detector Simulator, we recommend

checking it at least once within 6 months.

• If periodic checks are not performed, equipment malfunction may

occur due to aging of the sensor.

• Only a person with special technical knowledge about the Flame

Detector Simulator must dismantle the device.

• For details on checking the Flame Detector Simulator, please contact

our technical department or use our e-mail or website.

This product and product manual is subject to change without prior notice for improving the product performance

and convenience of use.

FS-310 Instruction

Manual

PAGE 3 of 10

Rev 1.4(2021.05.24)

TABLE OF CONTENTS

1. Overview ........................................................................................................................................................................... 4

2. Features............................................................................................................................................................................. 4

3. Operation.......................................................................................................................................................................... 4

4. Charging the Battery ................................................................................................................................................... 5

5. Specification .................................................................................................................................................................... 5

5.1. General Specifications........................................................................................................................................ 5

5.2. Mechanical Specifications ................................................................................................................................ 5

5.3. Electrical Specifications ..................................................................................................................................... 6

5.4. Environmental Specifications.......................................................................................................................... 6

5.5. Charger Specifications ....................................................................................................................................... 6

6. Name of Each Component....................................................................................................................................... 7

7. How to Replace Battery & Precautions .............................................................................................................. 8

8. Revision Record ...........................................................................................................................................................10

FS-310 Instruction

Manual

PAGE 4 of 10

Rev 1.4(2021.05.24)

1. Overview

FS-310 is a test simulator for checking whether or not a detector works properly in an

explosion district or dangerous area where GTF-1100U is installed. Because a test using actual

fire is not possible, the product was made to conduct a virtual fire test.

A spectrum similar to fire is generated by generating UV and IR using random flicker as

sources used in FS-310. FS-310 was made so that GTF-1100U can recognize the spectrum

generated like this as fire.

It is pressure resistant and explosion proof since its case is made out of AC4C(AL6061), and

since it is light weight, it is portable. It can be used for approximately 100 times when fully

charged using a dedicated recharger.

2. Features

Flame Simulator for testing GTF-1100U.

Portable since it uses batteries.

It can be used approximately 100 times when fully charged.

With low power design, it can be used for a long period of time.

It can be used in an explosion district or dangerous area since it is pressure resistant and

explosion proof.

3. Operation

Position FS-310 so it faces the front side of a detector.

If the switch on the handle is pressed, the lamp of FS-310 blinks for 15 seconds towards the

detector.

Check whether the detector works or not. (Red LED of the detector lights up)

It does not work for 30 seconds after 1 time operation (Wait Time)

If the switch is pressed once more during operation, it stops working. If the operation stops

even in this case, it does not work for 30 seconds.

Since the effective distance may vary depending on the FS-310 battery charge status, please

use after recharging.

If the detector does not work, perform repeat test after wait time.

If the detector does not recognize it as fire even after repeating, the detector needs to be

checked.

➢Check for foreign substances on the Sapphire Glass at the front side of the detector.

➢Check sensor through B.I.T.

FS-310 Instruction

Manual

PAGE 5 of 10

Rev 1.4(2021.05.24)

4. Charging the Battery

Places that should be avoided when recharging

➢Explosion district or dangerous area

➢Inside a hot car (over 40℃)

➢Place with lots of moisture or wet place

Detach the rear cover of FS-310 and connect the mounted DC Jack with the recharger.

The recharger supplied with FS-310 must be used.

The status can be checked with the LED of the recharger.

➢Red light: recharging

➢Green light: Recharging complete

➢Blinking Red light: Trouble occurred while recharging (Battery defect, charger defect)

It does not work even if operation switch is pressed during recharging.

If recharging is finished, disconnect the recharger from the simulator and store it separately.

5. Specification

5.1. General Specifications

5.2. Mechanical Specifications

I T E M S

S P E C I F I C A T I O N

Detection Distance

Max 10m

Continuous Operation

100 Count

Average Detection Time

10 sec

Approvals Classification

KCs: Ex d ⅡB+H2 T5

Warranty

Main

2 years

Battery

1 years

I T E M S

S P E C I F I C A T I O N

Explosion Proof type

Explosion Proof enclosure

Dimension

161(W) ×115.9H) ×303.2(D) mm

Weight including Sensor

App. 2.3kg

Material

AC4C(AL6061)

FS-310 Instruction

Manual

PAGE 6 of 10

Rev 1.4(2021.05.24)

5.3. Electrical Specifications

5.4. Environmental Specifications

5.5. Charger Specifications

I T E M S

S P E C I F I C A T I O N

Input

AC 100~240V / 50~60Hz / 1.0A

Output

16.8V / 2.5A

Indicator

Bi-Color LED (RED & GREEN)

[Table 1: FS-310 Specification]

I T E M S

S P E C I F I C A T I O N

Power

Li-ion Battery 14.6V 2750mAh

Max Charge Voltage

16.8V

Cut Off Voltage

12V

Full Charge Time

< 3 hours

Quiescent Current

< 350uA

Operation Current

3A Average

I T E M S

S P E C I F I C A T I O N

Storage Temperature

-20℃ ~ 25℃

Charge Temperature

0℃ ~ 45℃

Operation Temperature

-20℃ ~ 50℃

Operation Humidity

30 ~ 85% RH (Non-condensing)

FS-310 Instruction

Manual

PAGE 7 of 10

Rev 1.4(2021.05.24)

6. Name of each component

[Figure 1: FS-310 Name of each component]

Name

Descriptions

Reflector Assembly

Reflector making UV/IR Spectrum of the lamp perform long distance

irradiation.

Switch

Turn FS-310 On/Off

Handle

Handle designed to enable carrying FS-310.

Top Cover

Part combined with the body which protects the main board.

Body

Part protecting the main board and battery pack

Rear Cover

Cover part protecting the recharging jack connected to the battery

pack

[Table 2: Description of each component of FS-310]

FS-310 Instruction

Manual

PAGE 8 of 10

Rev 1.4(2021.05.24)

7. How to Replace Battery & Precautions

7.1. Battery Pack Diagram & Photo

PCM location (side)

FS-310 Instruction

Manual

PAGE 9 of 10

Rev 1.4(2021.05.24)

7.2. Battery Pack Specification

7.3. How to replace battery

7.3-1 Dismantling

➢Unscrew M3 SET SCREW (interlock device) using a wrench (2POINT)

➢Turn REFLECTOR ASSY counter-clockwise and separate it from the front side as shown in the

diagram.

➢Separate the CONNECTOR on the front main PCB side.

➢After releasing the REAR COVER by turning it counter-clockwise, dismantle the RETAINER

RING with the same method.

➢Pull out the BATTERY PACK ASSY as shown in the diagram.

7.3-2 Assembly

➢Assemble in the reverse order of dismantling.

I T E M S

S P E C I F I C A T I O N

Battery Type

18650 4S1P-29E

Normal Voltage

Over 14.6V

Battery pack assy

51.6 x 48.0 x 117.0

Certification

KC, CB, UN38.3

Manufacturer & Dealer

Gastron Co., Ltd.

FS-310 Instruction

Manual

PAGE 10 of 10

Rev 1.4(2021.05.24)

7.4. Precautions when replacing the battery

➢Do not replace in an explosion district or dangerous area

➢Do not replace in a place with high temperatures (over 40℃)

➢Avoid humid or wet places

➢Replace the battery after separating the CONNECTOR on the MAIN PCB side

➢Make an inquiry to the manufacturer when replacing the battery (place of purchase)

8. Revision Record

Version

Contents

Date

1.0

Initial revision

Dec. 19, 2017

1.1

Revision of operation & specification

Nov. 15, 2019

1.2

Revision of operation & specification

Apr. 3, 2020

1.3

Revision of specification

Jun. 30, 2020

1.4

Revision of Battery Pack specification

May. 24, 2021

Table des matières

Autres manuels GASTRON Détecteur de gaz

GASTRON

GASTRON GTD-2000Tx Manuel utilisateur

GASTRON

GASTRON GTD-3000Ex Manuel utilisateur

GASTRON

GASTRON G-Finder Multi Manuel utilisateur

GASTRON

GASTRON G-Finder GFS-100 Series Manuel utilisateur

GASTRON

GASTRON GTC-542 Manuel utilisateur

GASTRON

GASTRON GTL-200L Manuel utilisateur

GASTRON

GASTRON GPD-100 Manuel utilisateur

GASTRON

GASTRON GTD-1000T Series Manuel utilisateur

GASTRON

GASTRON GTD-2000Ex Manuel utilisateur

GASTRON

GASTRON GTD-3000TxW Manuel utilisateur

GASTRON

GASTRON GTD-1000Tx Manuel utilisateur

GASTRON

GASTRON GTD-2000TxW Manuel utilisateur

GASTRON

GASTRON GTD-5100F Manuel utilisateur

GASTRON

GASTRON GTD-3000ExW Manuel utilisateur

GASTRON

GASTRON GTC-500 Series Manuel utilisateur

GASTRON

GASTRON GTC-200A Manuel utilisateur

GASTRON

GASTRON GTD-5000F Manuel utilisateur

GASTRON

GASTRON GTD-1000Ex Manuel utilisateur

GASTRON

GASTRON GPD-100 Manuel utilisateur

GASTRON

GASTRON GTC-520F Manuel utilisateur

GASTRON

GASTRON GTD-1000Tx Manuel utilisateur

GASTRON

GASTRON GTC-550 Manuel utilisateur

GASTRON

GASTRON GIR-3000 Manuel utilisateur

Manuels Détecteur de gaz populaires d'autres marques

Macurco

Macurco GD-6 Manuel utilisateur

Evikon

Evikon E2632 Manuel utilisateur

Critical Environment Technologies

Critical Environment Technologies CGAS-A Series Manuel utilisateur

MSA

MSA altair 5 Manuel utilisateur

DOD Technologies

DOD Technologies ChemLogic CL96 Manuel utilisateur

DEGA

DEGA NS III LCD Series Manuel utilisateur

RKI Instruments

RKI Instruments 35-3001A-08-01 Manuel utilisateur

PEMTECH

PEMTECH PT2008 Series Manuel utilisateur

Coster

Coster RGS 328 Manuel utilisateur

Sygonix

Sygonix 2483186 Manuel utilisateur

Perry

Perry 1GA 50917MET/P Manuel utilisateur

isweek

isweek AS8900 Manuel utilisateur

Oldham

Oldham OLC 10 Manuel utilisateur

Wizmart

Wizmart NB983 Manuel utilisateur

Beacon

Beacon MEGA Manuel

RKI

RKI GX-6000 Manuel utilisateur

Dräger

Dräger PIR 7000 Manuel utilisateur

GDS

GDS GASMAX EC Manuel utilisateur