Garmin OVERLANDER Manuel d'instructions
OVERLANDER™
Quick Start Manual
Getting Started
WARNING
See the Important Safety and Product
Information guide in the product box
for product warnings and other
important information.
1Update the maps and software
on your device.
2Set up a Garmin Explore™
account (page 6).
3Mount the device in your vehicle
and connect it to power
(page 2).
4Set up a vehicle profile
(page 4).
5Navigate to your destination
(page 5).
Device Overview
Microphone for hands-free
calling
Volume control
Power key
Micro USB power and data port
Map and data memory card slot
3.5mm audio jack
Magnetic mount interface with
14 pin connector
Speaker
Mounting and Powering the
Device in Your Vehicle
WARNING
This product contains a lithium-ion
battery. To prevent the possibility of
personal injury or product damage
caused by battery exposure to
extreme heat, store the device out of
direct sunlight.
Both the device and its mount contain
magnets. Under certain
circumstances, magnets may cause
interference with some internal
medical devices and electronic
devices, including pacemakers,
insulin pumps, or hard drives in
laptop computers. Keep the device
away from medical devices and
electronic devices.
Before you use your device on
battery power, you should charge it.
2 Quick Start Manual
1Press the mount onto the
suction cup ball until it snaps
into place.
2Open the lever , press the
suction cup to the windshield,
and flip the lever back toward the
windshield.
The lever must be oriented
toward the top of the windshield.
3Extend the suction cup arm .
4If necessary, rotate the mount so
the Garmin® logo faces right-side
up.
5Plug the vehicle power cable
into the port on the mount.
6Place the back of the device onto
the mount.
7Plug the other end of the vehicle
power cable into a power outlet in
your vehicle.
Installing the Ball Mount
Adapter
Your device includes a one-inch ball
mount compatible with other third-
party mounting solutions.
Secure the ball adapter to the
mount using the included
screws .
Home Screen
NOTE: The home screen layout may
vary if it has been customized.
Quick Start Manual 3
Swipe down to view
notifications.
Swipe down twice to quickly
change settings and backlight
brightness.
Hold to customize the wallpaper
or add widgets to the home
screen.
Select to view road navigation
features and search for points
of interest.
Select to view the Garmin
Explore app, which provides
off-road navigation information
and detailed topographical
maps.
Select to open the app drawer.
The app drawer contains
shortcuts to all the apps
installed on your device.
Map and Software Updates
For the best navigation experience,
you should keep the maps and
software on your device up to date.
Map updates provide the newest
available changes to roads and
locations in the maps used by your
device. Keeping maps up to date
helps your device find recently added
locations and calculate more
accurate routes. Map updates are
large and may take several hours to
complete.
Software updates provide changes
and improvements to the device
features and operation. Software
updates are small and take a few
minutes to complete.
You can update your device using
two methods.
• You can connect the device to a
Wi‑Fi® network to update directly
on the device (recommended).
This option allows you to update
your device conveniently without
connecting it to a computer.
• You can connect the device to a
computer and update it using the
Garmin Express™ application
(garmin.com/express). This
option allows you to install map
data onto a memory card if the
updated maps are too large to fit
on the internal storage.
Vehicle Profiles
WARNING
Entering your vehicle profile
characteristics does not guarantee
that your vehicle's characteristics will
be accounted for in all route
suggestions or that you will receive
4 Quick Start Manual
the warning icons in all cases.
Limitations may exist in the map data
such that your device cannot account
for these restrictions or road
conditions in all cases. Always defer
to all posted road signs and road
conditions when making driving
decisions.
Routing and navigation are calculated
differently based on your vehicle
profile. The activated vehicle profile is
indicated by an icon in the status bar.
The navigation and map settings on
your device can be customized
separately for each vehicle type.
When you activate a camper vehicle
profile, the device avoids including
restricted or impassable areas in
routes based on the dimensions,
weight, and other characteristics you
entered for your vehicle.
Adding a Vehicle Profile
The vehicle profile is an optional
feature that provides routing based
on the height and weight of large
vehicles, such as campers or trailers.
If you have a large vehicle or if you
are towing a trailer, you should set up
a vehicle profile. You can set a
vehicle profile for each vehicle
configuration used with your
Overlander device.
1Select > .
2Select a vehicle option which
most closely resembles your
vehicle configuration.
3Follow the on-screen instructions
to enter the vehicle
characteristics.
Navigating to Your
Destination
Starting a Route
1Select , and search for a
location.
2Select a location.
3Select Go!.
Your Route on the Map
As you travel, the device guides you
to your destination using voice
prompts and information on the map.
Instructions for your next turn, exit, or
other action appear across the top of
the map.
Next action in the route.
Indicates the next turn, exit, or
other action and the lane in
which you should travel, if
available.
Distance to the next action.
Quick Start Manual 5
Name of the street or exit
associated with the next action.
Opens the Garmin Explore app
for off-road navigation.
Route highlighted on the map.
Next action in the route. Arrows
on the map indicate the location
of upcoming actions.
Vehicle speed.
Name of the road on which you
are traveling.
Estimated arrival time.
TIP: You can touch this field to
change the information it
shows.
Select to start a new route or
search for points of interest.
Map tools. Provides tools to
show you more information
about your route and
surroundings.
Finding a Location by
Category
1Select .
2Select a category, or select
Categories.
3If necessary, select a
subcategory.
4Select a location.
Changing the Search Area
By default, the device searches near
your current location. You can also
search other areas, such as near
your destination, near another city, or
along your active route.
1Select .
2Select .
3Select an option.
Garmin Explore
The Garmin Explore website and
mobile app allow you to plan trips and
use cloud storage for your waypoints,
routes, and tracks. Garmin Explore
offers advanced planning both online
and offline, allowing you to share and
sync data with your device. You can
use the included app to download
maps for offline access, and then
navigate anywhere without using your
mobile data service.
The Garmin Explore app is included
on your device. You can also
download the Garmin Explore app
from the app store on your
smartphone, or you can go to
explore.garmin.com.
6 Quick Start Manual
Select to open the map settings
menu.
Select to add waypoints and
create routes.
Select to change the map
orientation.
Select to view the map.
Select to manage waypoints,
tracks, routes, and activities.
Select to view Garmin Explore
account information and
settings.
Logging In to a Garmin
Explore Account
The first time you use your device,
you are prompted to log in to a
Garmin Explore account.
1Select Explore.
2Read and agree to the End User
License Agreement.
NOTE: If you do not agree with
the license terms, you can select
to exit the Garmin Explore
app. You cannot use the Garmin
Explore app until you accept the
license agreements.
3Select Next.
4Select an option:
• If you want to sync your
device data with your Garmin
Explore account
automatically, select Sync
My Data.
• If you want to create a
Garmin Explore account
without synchronizing data,
select Not Now.
5Select an option:
• If you have a Garmin Explore
account, enter your email
address and password, and
select Next.
• If you do not have a Garmin
Explore account, select
Create One.
6Follow the on-screen instructions
to create or log in to your Garmin
Explore account.
Downloading Garmin Explore
Maps
1From the Explore app, select
> Maps > Download Maps.
A list of maps for your location
appears.
2Select Show More Map Types
to view additional map types
(optional).
3Select a map type, and select
.
4If necessary, select Select
Region or Select Waypoint to
download maps for a different
region or waypoint location.
Quick Start Manual 7
Updating Garmin Explore
Maps
1From the Explore app, select
> Maps > Map Updates.
A list of map updates appears.
2Select an option:
• To download a specific map,
select .
• To download all map
updates, select Update All.
inReach® Remote
The inReach remote function allows
you to control your inReach device
using your Overlander device. You
can send messages, view weather
reports, trigger an SOS alert, and
more. Go to buy.garmin.com to
purchase an inReach device.
Connecting an inReach Device
1Bring the inReach device within
3 m (10 ft.) of your Overlander
device.
2On your Overlander device,
select .
3Select the Explore tab.
4Select inReach.
5Follow the on-screen instructions
on your Overlander device to
complete the pairing process.
After the pairing process is complete,
the inReach and Overlander devices
connect automatically when they are
within range.
More Information
Garmin Support Center
Go to support.garmin.com for help
and information, such as product
manuals, frequently asked questions,
videos, and customer support.
Getting the Owner's Manual
The owner's manual includes
instructions for using device features
and accessing regulatory information.
Go to garmin.com/manuals
/overlander.
Device Information
Viewing E-label Regulatory
and Compliance Information
1From the settings menu, swipe to
the bottom of the menu.
2Select About device >
Regulatory information.
Specifications
Operating
temperature
range
From -20° to 55°C
(from -4° to 131°F)
Charging
temperature
range
From 0° to 45°C
(from 32° to 113°F)
Radio
frequency/
protocol
2.4 GHz @ 15 dBm
8 Quick Start Manual
Power input Vehicle power using
the included vehicle
power cable. AC
power using an
optional accessory
(for home and office
use only).
Battery type Rechargeable
lithium-ion
Quick Start Manual 9
Autres manuels pour OVERLANDER
2
Table des matières
Autres manuels Garmin GPS
Garmin
Garmin GPSMAP 96 - Hiking Guide de référence
Garmin
Garmin Zumo 660 Manuel utilisateur
Garmin
Garmin FF 650 GPS Manuel utilisateur
Garmin
Garmin nuvi 2405 series Manuel d'instructions
Garmin
Garmin Cessna Caravan G1000 Manuel
Garmin
Garmin Forerunner 201 - Running GPS Receiver Manuel utilisateur
Garmin
Garmin GMA 340 Manuel
Garmin
Garmin StreetPilot 2730 Guide de configuration
Garmin
Garmin aera 500 Mode d’emploi
Garmin
Garmin Astro 320 DC 50 Manuel d'instructions
Garmin
Garmin Road Tech Zumo 665 Manuel utilisateur
Garmin
Garmin Cessna Caravan G1000 Manuel utilisateur
Garmin
Garmin nuvi 500-Series Manuel d'instructions
Garmin
Garmin iQUE 3600 Guide de l'utilisateur
Garmin
Garmin G500H Manuel utilisateur
Garmin
Garmin GPS 152 - Marine Receiver Manuel utilisateur
Garmin
Garmin GVN 53 - Navigation System Manuel utilisateur
Garmin
Garmin nüvi 760 Manuel d'instructions
Garmin
Garmin GPSMAP 168 Sounder Manuel utilisateur
Garmin
Garmin eTrex Vista Cx Manuel utilisateur
