Garland INT10G12MSBP Manuel utilisateur
User Guide
INT10G12MSBP / INT10G12SSBP
12/2022
Release Version: 4.22.1
1
User Guide
EdgeLens® Focus | INT10G12xxBP | 4.22.1
Copyright © 2022 Garland Technology, LLC. All rights reserved.
No part of this document may be reproduced in any form or by any means without prior written permission of
Garland Technology, LLC.
The Garland Technology trademarks, service marks ("Marks") and other Garland Technology trademarks are the
property of Garland Technology, LLC. PacketMAX Series products of marks are trademarks or registered
trademarks of Garland Technology, LLC. You are not permitted to use these Marks without the prior written
consent of Garland Technology.
All other trademarks and trade names mentioned in this document are the property of their respective holders.
Notice
The purchased products, services and features are stipulated by the contract made between Garland
Technology and the customer. All or part of the products, services and features described in this document may
not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of any kind, express or implied.
Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.
2
User Guide
EdgeLens® Focus | INT10G12xxBP | 4.22.1
Table of Contents (click topic to go directly to the page)
1. Dashboard 5
Basic LED Indications 5
Dashboard Panel 5
LED Indications 5
Packet Broker 6
Dashboard Panel 6
LED Indications 6
Default Tap Mode 7
Dashboard Panel 7
LED Indications 7
Primary-Secondary Tap Mode 8
Dashboard Panel 8
LED Indications 8
Load Balance Tap Mode 9
Dashboard Panel 9
LED Indications 9
ATLB2 Chained Tap Mode 10
Dashboard Panel 10
LED Indications 10
2. System 11
System Info 12
General 12
Admin 12
Users 13
Groups 13
Authentication 14
Local Authentication Disable 14
Local Authentication Enable 14
TACACS Primary Authentication 14
TACACS Test 14
TACACS Ping Test 15
TACACS Secondary Authentication 15
TACACS Test 15
TACACS Ping Test 15
Network Settings 16
IPv4 / Disable 16
IPv4 Enable 16
IPv6 Enable 17
Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.
3
User Guide
EdgeLens® Focus | INT10G12xxBP | 4.22.1
IPv6 Disable 17
Add SSL Certificate 17
Disable Using Uploaded SSL Certificate 18
Date & Time 18
Timezone 18
UTC 18
Manually Set Date & Time 18
NTP No Authentication (Symmetric) 19
NTP Authentication (Symmetric) 19
Syslog 20
Syslog Test 20
SNMP 20
SNMP Test 21
Export Configuration 21
Import Configuration 21
Software Upgrade 22
Reboot 22
3. Bypass Taps 23
Default Tap Mode 24
Bypass Tap Name 25
Heartbeat Settings 25
Taps Settings 25
Primary-Secondary Tap Mode 29
Bypass Tap Name 30
Heartbeat Settings 30
Configure Primary-Secondary Tap Mode 31
Taps Settings 31
Switch To Primary 34
Load Balance Tap Mode 35
Bypass Tap Name 36
Heartbeat Settings 36
Configure Load Balance Tap Mode 37
ATLB2 Chained Tap Mode 40
Configure ATLB2 Chained Tap Mode 41
Remove Entity 42
Add Entity 44
Remove Entity Inline Appliance Member 44
Add Entity Inline Appliance Member 44
Taps Settings 44
ATLB2 Chained Tap Mode GUI Indications 47
Normal 47
Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.
4
User Guide
EdgeLens® Focus | INT10G12xxBP | 4.22.1
Entity Member Abnormal 48
Entity Bypass 49
Entity Removed From Chain 50
ATLB2 Chained Tap Forced Bypass 51
ATLB2 Chained Tap Bypass 52
1. Dashboard
This section provides an overview of the basic dashboard architecture, default port assignments and LED
indications. The port assignments and LED indications will change on the dashboard based on configuration
changes. The dashboard provides an exact detail of the unit’s faceplate. However,
some LED indications that are displayed on the faceplate, are not displayed on the dashboard.
The dashboard provides access to the Packet Broker, Port Info and System configuration options
by selecting the desired option in the top menu bar. These options are covered in detail per their
specific sections.
Basic LED Indications
The basic LED indications are consistent regardless of configuration changes. The Ethernet and Serial
interfaces always indicate (GREEN). However, on the faceplate, the Ethernet Interface has LEDs to
indicate link and activity while there are no Serial Interface LEDs.
Dashboard Panel
LED Indications
Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.
5
User Guide
EdgeLens® Focus | INT10G12xxBP | 4.22.1
PS2 Power Supply 2 LED
PS1 Power Supply 1 LED
SYS System LED
Ethernet InterfaceUpper Left LED (always illuminated)
Serial Interface Lower Left LED (always illuminated)
Packet Broker
The packet broker section typically consists of ports 5 through 12. However, the available packet
broker ports is determined by the following conditions:
- The tap mode selected, Default, Load Balance, Primary-Secondary or ATLB2 Chained.
- If tap monitor ports are applied
Dashboard Panel
LED Indications
Port 3 Left Up Arrow Link LED
Port 4 Left Down Arrow Link LED
Port 5 Left Up Arrow Link LED
Port 6 Left Down Arrow Link LED
Port 7 Left Up Arrow Link LED
Port 8 Left Down Arrow Link LED
Port 9 Left Up Arrow Link LED
Port 10 Left Down Arrow Link LED
Port 11 Left Up Arrow Link LED
Port 12 Left Down Arrow Link LED
* The right up/down arrows for ports 3 through 12 are activity LEDs. These LEDs are N/A in the GUI.
Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.
6
User Guide
EdgeLens® Focus | INT10G12xxBP | 4.22.1
Default Tap Mode
In this mode, the network ports and inline appliance ports are defined by the system.
Dashboard Panel
LED Indications
L/A1 Tap 1 Network Port 1 Link/Activity LED
L/A2 Tap 1 Network Port 2 Link/Activity LED
BP Tap 1 Bypass LED
Port 3 Left Up Arrow Tap 1 Inline Appliance Link LED
Port 4 Left Down Arrow Tap 1 Inline Appliance Link LED
* The right up/down arrows for ports 5 through 12 are activity LEDs. These LEDs are N/A in the GUI.
* The L/A1 and L/A2 LEDs only indicate link in the GUI.
Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.
7
User Guide
EdgeLens® Focus | INT10G12xxBP | 4.22.1
Primary-Secondary Tap Mode
In this mode, the network ports and the primary inline appliance ports are defined by the system
for the tap. The secondary inline appliance ports will be automatically configured by the system
in the order assigned to the tap. The secondary inline appliance ports availability are considered
in vertical pairs, 5/6, 7/8, etc.
Dashboard Panel
LED Indications
L/A1 Tap 1 Network Port 1 Link/Activity LED
L/A2 Tap 1 Network Port 2 Link/Activity LED
BP Tap 1 Bypass LED
Port 3 Left Up Arrow Tap 1 Primary Inline Appliance Link LED
Port 4 Left Down Arrow Tap 1 Primary Inline Appliance Link LED
Port X Left Up Arrow Tap 1 Secondary Inline Appliance Link LED
Port X Left Down Arrow Tap 1 Secondary Inline Appliance Link LED
* The right up/down arrows for the primary inline appliance ports 3 and 4 as well as the secondary
inline appliance ports X are activity LEDs. These LEDs are N/A in the GUI.
* The L/A1 and L/A2 LEDs only indicate link in the GUI.
Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.
8
User Guide
EdgeLens® Focus | INT10G12xxBP | 4.22.1
Load Balance Tap Mode
In this mode, the network ports and initial inline appliance ports are defined by the system for the tap.
The tap may have up to three additional inline appliance ports applied, total 4. The ports will be
automatically configured by the system in the order assigned to the tap. The ports availability are
considered in vertical pairs, 5/6, 7/8, etc.
Dashboard Panel
LED Indications
L/A1 Tap 1 Network Port 1 Link/Activity LED
L/A2 Tap 1 Network Port 2 Link/Activity LED
BP N/A
Port 9 Left Up Arrow Tap 1 Inline Appliance Link LED
Port 10 Left Down Arrow Tap 1 Inline Appliance Link LED
Port X Even Left Up Arrow Tap 1 Additional Inline Appliance 2 through 4 Link LED
Port X Odd Left Down Arrow Tap 1 Additional Inline Appliance 2 through 4 Link LED
Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.
9
User Guide
EdgeLens® Focus | INT10G12xxBP | 4.22.1
* The right up/down arrows for the inline appliance ports 3 and 4 as well as the additional
inline appliance ports X are activity LEDs. These LEDs are N/A in the GUI.
* The L/A1 and L/A2 LEDs only indicate link in the GUI.
ATLB2 Chained Tap Mode
When this mode is applied, the system automatically configures the following default configuration.
Ports 1 Tap 1 Network Port
Ports 2 Tap 1 Network Port
Ports 3-4 Entity A Inline Appliance Ports
Ports 5-6 Entity B Inline Appliance Ports
Ports 7-8 Entity C Inline Appliance Ports
Ports 9-10 Entity D Inline Appliance Ports
Any previous configured database associated with ports 1 through 10 will be deleted when this mode is
applied. Network ports 1 and 2 are paired. The network traffic is chained through entities A, B, C and D.
Dashboard Panel
LED Indications
L/A1 Tap 1 Network Port 1 Link/Activity LED
L/A2 Tap 1 Network Port 2 Link/Activity LED
BP Tap 1 Bypass LED
Port 3 Left Up Arrow Entity A Inline Appliance Link LED
Port 4 Left Down Arrow Entity A Inline Appliance Link LED
Port 5 Left Up Arrow Entity B Inline Appliance Link LED
Port 6 Left Down Arrow Entity B Inline Appliance Link LED
Port 7 Left Up Arrow Entity C Inline Appliance Link LED
Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.
10
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Garland Changer
Garland
Garland GAA10G20AC Manuel utilisateur
Garland
Garland INT10G8SR56-SP Manuel utilisateur
Garland
Garland P10GMSFE-5 Manuel utilisateur
Garland
Garland SFP Field TAP Series Manuel utilisateur
Garland
Garland INT10G12MSFE-5 Manuel utilisateur
Garland
Garland EdgeSafe M10GMSBPv2 Manuel utilisateur
Garland
Garland EdgeLens INT10G8SR56 Manuel utilisateur
