Garett G11 Manuel utilisateur
User manual
MULTILANGUAGE
www.garett.eu
SmartWatch
Garett
G11
MULTILANGUAGE
Slovenčina 72
Українська 82
INFO (EN/PL) 84
Polski 13
Magyar 43
Română 63
Nederlands 53
English 3
Český 23
Lietuvos 33
English
SECURITY ISSUES
•The device should be protected against heat sources and direct sunlight.
• Do not immerse the device in water.
• In the event of damage, have the device serviced by an authorized
service center for inspection / repair. Attempting to repair it yourself may
lead to damage to the device and will void the warranty.
• Using this device near medical devices may disrupt their operation. Pay
special attention when using the Smartwatch near medical devices, such
as pacemakers, hearing aids and other electronic medical devices.
• Only clean the device with a soft, slightly damp cloth. Do not use
chemicals or detergents to clean this device.
IMPORTANT! Smartwatch is not a medical device. The Garett G11
smartwatch and the BTSmartwatch application are not intended for medical
diagnosis, treatment or as a preventive measure against disease or illness.
Before changing sleep habits and physical activity, you must first seek
medical advice.
Before use, carefully read the user's manual and save it for later use. The
manufacturer is not responsible for any damage / injury caused by
improper use. Depending on the part of the Smartwatch, some functions
may differ with the functions described in the user manual.
• Do not dive in the device.
• It is forbidden to throw equipment into the fire. There is a risk of battery
explosion and, as a consequence, life and health hazards.
• It is forbidden to use the device if it is damaged.
5. Camera
3. Return button
2. On / o ffbutton Return to the
screen lock / wake up main
screen
1. Touch screen
4. Micro USB charging port
PRODUCT DESCRIPTION
Place the watch on your wrist and adjust the length of the strap so that the
device strap is not loose.
INSTALLATION
We can use the watch in three ways. The first way is to connect it to the
phone via Bluetooth to display notifications, read SMS messages, receive
calls from the phone on the watch. The second method is to install the SIM
card in the watch and use it as an independent telephone by answering
voice calls and SMS messages sent to the number of the installed SIM card.
The third method is the simultaneous use of the SIM card installed in the
watch and the connection of the watch via Bluetooth with the phone.
USING THE WATCH:
1. Remove the back cover of the watch. On one of the corners of the cover,
we find an incision, thanks to which we can undermine it.
4. Pick up the badge, place the sim card in the slot, lower the plate then
move it in the direction (-> LOCK).
6. After performing the above operations, re-insert the battery and put on the
back cover of the watch.
3. Move the shield securing the Micro SIM slot in the direction of the arrow
(<-OPEN) located on the plate.
2. After removing the case, we will see a battery that we take out. Under the
battery you will find a Micro SIM card slot and a Micro SD Memory Card.
5. Insert the Micro SD memory card up to 32GB into the slot.
INSTALLATION OF MICRO SIM CARD AND
MICRO SD MEMORY CARDS (OPTIONAL)
CHARGING
2. Place the smaller end of the cable in the Micro USB port (4) of the watch
under the cap on the left side of the device. Then connect the other end of
the cable to the USB port of your computer or USB power adapter.
1. The smartwatch is loaded using the Micro USB cable attached to the
device.
BEFORE FIRST USE
Smartwatch works with your smartphone using the BTSmartwatch.
Before using, download this application from the
Google Play Store and install it on your phone. The application can be
searched by entering the name "BTSmartwatch in the
browser or by scanning the corresponding QR code shown below.
Android
Note: In order to display information about the Smartwatch activity, Garett
G11 does not require a permanent connection with the smartphone, but in
order to fully use the functions of the watch, it should be paired with the
smartphone using the BTSmartwatch application.
1.Turn on Bluetooth on your phone.
2. Make sure that the Smartwatch is turned on and the Bluetooth of the
watch is active (Menu-> Bluetooth -> (Power: On, Visible: On).
Note: Each time you turn on the Smartwatch and the application, the
data automatically synchronises (devices must be paired!).
In order for the steps to be measured, the pedometer must first be
activated. To go to the pedometer to activate it, select the pedometer
function of the watch main menu. Then click "Beginning", the
pedometer will start to measure steps. After returning to the main
menu, the steps will be continuously measured in the background.
PAIRING WITH ANDROID
application, please contact:
Optionally we can
In case of problems with the
download
QR code in the smartwatch menu.
also use to scan
Android
4. In the application, click on the three dots in the upper right corner, then click
on "Bluetooth settings", the application will go to the Bluetooth settings of our
phone. In the list of available devices, we search for devices called "Garett
G11" and click on it to connect.
3. Open the BTSmartwatch application.
5. When pairing, place the watch near the phone with which we will pair it.
6. After successful pairing, the clock display will ask you to agree to
synchronize.
Compatibility of the watch with devices running on iOS is limited. Functions
that will be available include synchronizing the contact list, call log, making
and receiving voice calls using the watch.
4. When pairing, place the watch near the phone with which we will pair it.
3. Go to your phone's Bluetooth settings and on the list of available devices
find the device named "Garett G11", and click on it to connect. You should
also give consent to synchronize your contacts.
2. Make sure that the Smartwatch is turned on and the Bluetooth of the watch
is active (Menu-> Bluetooth -> (Power: On, Visible: On).
1. Turn on Bluetooth on your phone.
PAIRING WITH IOS SYSTEM
Turn on / off
Change the watch face
After unlocking the display you will see the clock face. Touch your finger on
the watch face to change it.
Press and hold the on / o ffbutton (2) to turn the device on. When you want to
turn o ffthe watch, press and hold the on / o ffbutton (2) again, the display will
show the message "Power off?", Click "Yes".
OPERATION
By sliding your finger to the left or right on the watch face you will see the
main screen. In the upper part of the main screen there is a notification bar,
on which we will see, among others: GSM range, the icon of new notifications,
battery level. The date and time are displayed below. Under the date and time
there are two icons: on the left - quick access to the dial pad, on the right -
quick access to SMS messages from the connected phone / stored in the
memory of the watch when using the SIM card. We can display the content of
each message, reply to a message, etc.
MAIN SCREEN
We enter the main menu by sliding your finger to the left or right on the main
screen of the watch. By sliding your finger left / right we move through the
menu. By touching the screen, we enter the selected function. After pressing
the return button (3), we return to the previous screen. Press the (2) button to
return to the main screen.
lSettings:
1. Bluetooth: Bluetooth module settings
2. Remote ...: Last notification from the connected phone.
3. Fast ...: QR code to download the application for the phone.
4. Settings:
lProfiles: select the sound profile / vibration of notifications.
vDate and time: time settings, format 12/24 hours and date displayed on
the watch.
vLanguage: Select the menu language of the watch.
vInput methods: keyboard settings.
vAirplane mode: enable / disable airplane mode.
vOther settings> LCD brightness: changes the brightness and backlight
time of the display.
vSIM security: SIM card PIN code settings.
v Show: Select the background of the main menu.
vPhone security: setting the watch lock code. The default code is 1122.
lNetwork settings: GSM settings of the SIM card.
lCall settings: voice call settings.
lRestore settings: restore factory settings. The default code is 1122.
vMotion: motion sensor settings.
lSecurity settings:
lConnectivity: internet settings of the SIM card.
5. Camera: The function of taking pictures with the built-in camera of the
watch.
MAIN MENU
6. Image viewer: Image viewer saved on the memory card of the watch.
7. Player: The function of controlling the music player of the phone with the
watch.
8. BT camera: Taking pictures with your phone's camera using the watch. For
the function to work properly, the phone screen must be unlocked.
9. Sound recorder: Voice recorder function.
10. Alarm: Activation / deactivation and configuration of the alarm function.
19. File manager: File browser saved on the memory card of the watch.
21. Browser: Application not available on the Garett G11.
12. Calculator: The function of the built-in calculator.
13. Stopwatch: Stopwatch function.
22. Facebook: Application not available on the Garett G11.
23. Twitter, WhatsApp: Apps not available on the Garett G11.
20. World clock: A function that allows you to check the current time in other
capitals of countries around the world.
16. Seated: Enable / disable and configure reminders about inactivity.
24. SIM tool: SIM tools.
14. Pedometer: A function enabling registration of activity.
17. Anti lost: Phone search function. Starts an audible alarm on the phone.
The function also allows you to turn on the automatic alert on the watch when
it loses the Bluetooth connection to the phone.
18. Decreasing the consumption: Activating / deactivating the energy
saving function.
11. Calendar: Calendar function.
15. Sleep: A function that monitors the quality of our sleep. To activate the
functions, click "Beginning".
Table des matières
Langues :
Autres manuels Garett Montre
Garett
Garett Kids Life Max 4G RT Manuel utilisateur
Garett
Garett Garett Women DIANA Manuel utilisateur
Garett
Garett Smile Manuel utilisateur
Garett
Garett FIT 14 Manuel utilisateur
Garett
Garett GT20S Manuel utilisateur
Garett
Garett Action Manuel utilisateur
Garett
Garett Kids 5 Manuel utilisateur
Garett
Garett Women LISA Manuel utilisateur
Garett
Garett Men Elegance RT Manuel utilisateur
Garett
Garett Kids Cloud 4G Manuel utilisateur
