Warnings
PAY ATTENTION to these statements when reading this manual and the
information contained can save your life.
DANGER : Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING : Be alert to the possibility of serious bodily injury if the
instructions are not followed. Be sure to read and carefully follow all of the
messages.
CAUTION : Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
READ AND FOLLOW ALL SAFETY STATEMENTS, WARNINGS, ASSEMBLY
INSTRUCTIONS AND USE & CARE DIRECTIONS BEFORE ATTEMPTING TO
ASSEMBLE. KEEP THIS MANUAL FOR FUTURE REFERENCE.
REFER TO THE IMAGES IN THIS MANUAL FOR VISUALIZATION OF THE
ASSEMBLY PROCESS IN ADDITION TO READING THE INSTRUCTIONS.
SOME PARTS CONTAIN SHARP EDGES. SHARP POINTS OR EDGES CAN
SCRATCH, POKE, OR PUNCTURE. WEAR APPROPRIATE CLOTHING AND
SAFETY GLOVES DURING ASSEMBLY.
THE 6V RECHARGEABLE BATTERY (NOT INCLUDED) SHOULD HAVE A
COMPLETE CHARGE PRIOR TO THE FIRST TIME OF OPERATION. THIS
REQUIRES A MINIMUM OF AT LEAST SIX (6) HOURS OF CHARGING.
THE PROPER SPACING BETWEEN THE SPIN PLATE AND THE FUNNEL IS
3/8 INCH. THIS IS VERY IMPORTANT FOR SERVICE FREE OPERATION.
TO TEST YOUR FEEDER FOLLOW THE INSTRUCTIONS IN THE TIMER
MANUAL. DO NOT TEST FEEDER WHEN IT CONTAINS FEED. TEST
FEEDER WHEN EMPTY ONLY! TESTING THE FEEDER WHILE IT CONTAINS
FEED WILL CAUSE FEED TO BE DISCHARGED AT A HIGH VELOCITY AND
COULD RESULT IN BODY INJURY. FAILURE TO FOLLOW THESE
INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR DEATH!
HU2222501-GW –ENG Pg.3 20160317-V2
