Futech PROCROSS 8.0 DS Manuel utilisateur
USER
MANUAL
044.80G PROCROSS 8.0 DS
EN ENGLISH
Manual
in your language?
Check the back cover
2
05
04
01
07
03
06
08
09
XY
ON/OFFON/OFF
ENTER
%
%
12
I
II
IX
VIII
VII
VI
III IV
V
XII
XI
X
r
n
b
d
c
a
e
o
p
q
s
J
05
K
E
D
M
B
L
H
C
A
F
G
I
10
07
02
11
OVERVIEW
3
HOUSING
01 Laser head
02 Laser base
03 Horizontal laser line
04 Vertical laser line
05 Keypad
06 Belt
07 5/8” Tripod thread
08 Magnetic circle
09 Li-ion battery
10 Fine adjustment
11 Adjustable foot
12 Remote control
KEYPAD
A Power button
B Tilt security button
C H-button for horizontal lines
D V-button for vertical lines
E Receiver buttons
F Remote control button
G Power indicator
H Tilt security indicator
I Horizontal lines indicator
J Vertical lines indicator
K Receiver mode indicator
L Remote control indicator
M Status indicator
REMOTE CONTROL
a Power button
b Tilt / backlight button
c H-button for horizontal lines
d V-button for vertical lines
e Receiver mode button
n Manual slope button
o Digital slope button
p Arrow up button
q Arrow down button
r X/Y button
s Enter button
I Slope percentage X-axis
II Slope percentage Y-axis
III Horizontal lines indicator
IV Vertical lines indicator
V Receiver mode indicator
VI Tilt security indicator
VII Levelling indicator
VIII Manual slope indicator
IX Slope indicator
X Connection symbol + Bat-
tery indication laser
XI Symbol + battery indication
remote control
XII Send commando symbol
4
QUICK START GUIDE
KEYPAD
REMOTE
CONTROL
NAME
FUNCTION
A - Power button Press Switch the device ON/OFF
- a Power button Press - Switch the remote control ON/OFF
- (de)activate SLEEP mode of device when connected
B b Tilt security button Press (De-)activate tilt security
C c H-button Press (AUTO LEVELLING MODE)
(De)activate extra horizontal laser lines
(MANUAL SLOPE MODE, DEVICE ONLY)
Change to X-axis
Hold (MANUAL SLOPE MODE, DEVICE ONLY)
X-axis descends on the side pointed by the arrow of the x-axis.
D d V-button Press (De)activate extra vertical laser lines
Hold (MANUAL SLOPE MODE, DEVICE ONLY)
X- or Y-axis rises on the side pointed by the arrow of the x- or y-axis.
(depends on the activated axis, see LED indicators I, J and K)
E e Receiver button
Press (1st time)
Press (2nd time)
Press (3rd time)
(AUTO LEVELLING MODE)
Activate the receiver mode (Pulse) - 35% power safe
Activate the receiver mode (Pulse) - 65% power safe
Deactivate the receiver mode.
Press (MANUAL SLOPE MODE, DEVICE ONLY)
Change to Y-axis
Hold (MANUAL SLOPE MODE, DEVICE ONLY)
Y-axis descends on the side pointed by the arrow of the y-axis.
F - Remote control button Press (De)activate the remote control function of the device
G - Power indicator Red, continuous The laser is ON
Red, ashing The laser is ON, power of the battery is LOW.
5
KEYPAD
REMOTE
CONTROL
NAME
FUNCTION
H - Tilt security indicator No Tilt security mode OFF
Red, ashing, slow Prepare tilt security (duration: 50 sec. after last manipulation)
Red, ashing, fast Tilt security active
Red, continuous Tilt alarm
I - Horizontal indicator No (AUTO LEVELLING MODE)
All horizontal laser lines OFF
(MANUAL SLOPE MODE, DEVICE ONLY)
X-axis is not selected to set slope
Green, continuous (AUTO LEVELLING MODE)
At least one horizontal line is ON
(MANUAL SLOPE MODE, DEVICE ONLY)
X-axis is selected to set slope
J - Vertical indicator No (AUTO LEVELLING MODE)
All vertical laser lines OFF
(MANUAL SLOPE MODE, DEVICE ONLY)
Y-axis is not selected to set slope
Green, continuous (AUTO LEVELLING MODE)
At least one vertical line is ON
(MANUAL SLOPE MODE, DEVICE ONLY)
Indicates together with horizontal indicator [I] or reveiver mode
indicator [K] which axis can be set.
K - Receiver indicator No (AUTO LEVELLING MODE)
Receiver mode OFF
(MANUAL SLOPE MODE, DEVICE ONLY)
Y-axis is not selected to set slope
6
KEYPAD
REMOTE
CONTROL
NAME
FUNCTION
K - Receiver indicator Green, continuous (IN AUTO LEVELLING MODE)
Reveiver mode ON, 35% power save
(IN MANUAL SLOPE MODE, DEVICE ONLY)
Y-axis is selected to set slope
Green, ashing Receiver mode ON, 65% power save
L - Remote control
indicator
No Remote control mode OFF.
Blue Remote control mode ON. Laser can be used with remote control.
M - Status indicator Green, ashing Auto levelling busy
Green, continuous Laser is levelled
Red, ashing Setting slope
Red, continuous Slope set (LASER IS NOT LEVELLED!)
- n Manual slope button Push (De)activate manual (and electronic) slope mode
- o Digital slope button Push (De)activate digital slope mode
- p Arrow up button Push Let the slope or slope percentage increase along the x or y axis
(depending on which axis is selected)
- q Arrow down button Push Lower the slope or slope percentage along the x or y axis (depending
on which axis is selected)
- r X/Y button Push Switch between X and Y axis to set slope
- s Enter button Push Sends the selected digital slope on the remote control to the laser
7
SAFETY
Please read the safety instructions is provided in
the separate booklet provided with the device.
LASER RADIATION – Class 2 Laser product. – Do
not stare into beam
FIRST TIME USAGE
Remove all protection foils.
Place the provided LI-ION battery in the device
by opening the battery cover [06]. Make sure the
batteries are fully charged. The four LEDs of the
battery indicator light up green.
Place 4x AA Alkaline batteries in the remote
control.
BATTERY AND CHARGER
LASER:
The supplied li-ion battery (14.8V, 3400 mAh - art.
no.: H60031) should be screwed on the designat-
ed place of the device.
To check the battery level, press the small power
button on the battery to see the power indicators
(4 LEDS).
· 4 LEDS lights: > 75% power
· 3 LEDS lights: > 50% power
· 2 LEDS lights: > 25% power
· 1 LED lights: < 25% power
When the battery runs out of power, the project-
ed laser lines starts to ash slowly. The power
indicator [G] will start ashing red.
To charge this battery, you can use the provided
16V - 2.6A charger for charging (art.nr: H60032).
In order to avoid all risks, only use the charger
and battery provided with the laser instrument.
You can charge the battery during the usage of
the instrument.
DO NOT LEAVE A CHARGING BATTERY
UNATTENDED.
REMOTE CONTROL:
The remote control works with 4x 1.5V AA Alka-
line batteries.
8
FUNCTIONS
AUTO-LEVELLING
The Procross 8.0 DS rst automatically levels itself
after turning on the device. The laser can level
itself within an operating angle of approx. 3,5°.
The auto-levelling system performs the neces-
sary ne adjustments, with the help of electronic
measuring sensors, one for each axis.
TILT SECURITY
The tilt-security avoids measuring errors. By
default, the laser will be active with the tilt-secu-
rity activated. After turning on the laser or after
activating the tilt-security, the tilt-security is being
prepared during 50 seconds. During this time
you can install the laser in the correct position. 50
seconds after you hit the last button, the tilt-secu-
rity is active.
When the tilt-security sensors detect a small
shock (e.g. a vibration, a gust of wind, ...) the tilt
alarm is activated. This gives you the opportunity
to check if the laser is still in the correct position
after the shock. You must exit the tilt function,
place the laser in the correct position and restart
the tilt fucntion to continue. A new preparation
process of 50 seconds will start before the Tilt-se-
curity becomes active.
Tilt-security is the best choice if accuracy is
crucial.
DIGITAL SLOPE
There are 3 different manners of using the slope
function of the Procross 8.0 DS: manual, electron-
ic and digital. This last one is the most advanced
way to use the slope function.
Digital slope allows you to enter a known slope
percentage on the laser’s remote control, for
both the X and Y axes. Once conrmed, the laser
will automatically set itself to the correct slope.
IP66
The Procross 8.0 DS has an IP value of 66, which
means the laser has a complete protection
against dust and water projected against the
housing. This allows the Procross 8.0 DS to be
used indoors and outdoors.
USE
Press the power button [A] to turn on the device.
Self levelling and tilt-security countdown will
start. (see further).
· To use the remote control, activate the remote
function by pressing the remote control button
[F] (remote control indicator [L] becomes blue).
9
· Press the power button [a] of the remote con-
trol to turn on the remote control.
NOTE
The screen of the remote control has backlight-
ing. You can turn this functionality on by hold-
ing the tilt/backlight button [b] for 3 seconds.
When not used for 3 minutes, the remote con-
trol will automatically switch off to save battery
power.
When the laser device and remote control com-
municate with each other, the connection symbol
[X] and symbol remote control [XI] (including
their battery indication) will be visible in the lower
right corner of the display of the remote control
[12]. When there is no connection between laser
and remote control, only the symbol + battery
indication remote control [XI] is visible.
WHAT IF MY (NEW) REMOTE CONTROL DOES
NOT COMMUNICATE WITH MY DEVICE?
In normal circumstances, the supplied remote
control is paired with the device. In the excep-
tional cases this link is missing, or when you
need to replace the remote control, you can
pair it as follows:
1. Shut down the laser and the remote
control
2. Hold the H-button [c] and V-button [d] of
the remote control simultaneously.
3. While holding these buttons, press the
power button [a] of the remote control.
Both connection symbols of laser [X] and
remote control [XI] will ash slowly on the
display.
4. Switch on the laser device by pressing the
power button [A].
5. When succesfully paired, additional
symbols appears on the screen and the
remote control indicator [L] lights blue.
NOTE
The choice of the tripod determines the user-
friendliness of the device.
If the workplace has a high brightness, for
example when working outside in a sunny area,
you will need a laser receiver to detect the laser
beam. (see further)
10
AUTO-LEVELLING
After turning on the device or when you turn off
the slope mode, self levelling will automatically
place the laserlines 100% levelled.
While levelling, the status indicator [M] ashes
green and the levelling indicator [VII] on the
remote control’s display will ash as well.
When levelling is nished, and the laser lines
are 100% levelled, the status indicator [M] will
be green and the levelling indicator [VII] on the
remote control’s display will be visible.
< 3,5°
The laser can level itself in a range of approx. 3,5°
in every direction. This means the laser can show
100% horizontal or vertical lines when placed on
a sloped surface of approx. 3,5° maximum.
> 3,5°
In case the laser is placed on a surface that
exceeds the 3,5°, a levelled horizontal or vertical
laser line will no longer be possible.
The status indicator [M] will ash red rapidly, the
laser lines will ash rapidly and a fast beeping
sound will be heard. On the remote control the
levelling indicator [VII] will continue to ash.
> 3,5°
Place the laser device on a atter surface, within
the levelling range of 3,5° or turn the adjusta-
ble feet [11] of the laser base [02] to bring the
device within the 3.5° levelling range if possible.
The laser will self level automatically when placed
Autres manuels pour PROCROSS 8.0 DS
2
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Futech Niveau laser
Futech
Futech RED RACER 050.01.1E Manuel utilisateur
Futech
Futech Nexus Manuel utilisateur
Futech
Futech PARA ONE RED Manuel utilisateur
Futech
Futech 906D-20 Manuel utilisateur
Futech
Futech SPINNER RED Manuel utilisateur
Futech
Futech EAGLE 32 Manuel utilisateur
Futech
Futech PARA ONE RED Manuel utilisateur
Futech
Futech MULTICROSS 8 Manuel utilisateur
Futech
Futech MULTICROSS 8 HPSD Manuel utilisateur
Futech
Futech MULTICROSS 8 Manuel utilisateur
Futech
Futech 0273DG Manuel utilisateur
Futech
Futech 150.12.TL Manuel utilisateur
Futech
Futech PARA DS RED Manuel utilisateur
Futech
Futech MULTICROSS 3D COMPACT 030.03D Manuel utilisateur
Futech
Futech MULTISQUARE 5 Manuel utilisateur
Futech
Futech MULTICROSS 4D ELECTRONIC Manuel utilisateur
Futech
Futech SATURN 2.0 RED Manuel utilisateur
Futech
Futech 850.060DM Manuel utilisateur
Futech
Futech MULTICROSS 8 HIGH PRECISION RED Manuel utilisateur
Futech
Futech 011.20R Manuel utilisateur
