Furuno GP-30 Operators Manuel

Selecting Display Mode

Press the [DISP] key.

Plotter Display

[ 5 ]

CSE:

7°

SPD:

0.0 k

34°44.000N 135°21.000E

Highway Display

CSE

BRG

RNG

SPD

7°

---°

---

6.5 k

0.5 0.5

XTE:

0.05n

Steering Display

2D MAG 05:32

30 60

300 330

SPD: 6.5 k

tCSE: 20°

RNG: --.- n

mBRG: ---°

TTG: ETA:

1H30M 12:30

Nav Data Display

2D 12–DEC–97 15:37:40

SPD: CSE:

34°44. 000'

135°21. 000'

7°6.5

GP-30/35 GPS NAVIGATOR

Operator's Guide

The purpose of this operator's guide is to provide the basic operating procedures for this

equipment. For detailed information, refer to the operator's manual.

Enlarging, Shrinking the

Display

1. Press the [MENU] key.

2. Press the [ENT] key.

3. Press ▲ to enlarge; ▼ to shrink.

4. Press the [ENT] key to close the window.

Shifting the Cursor, Display

1. Press the Cursor Pad to turn on and shift

the cursor.

2. Place the cursor on an edge of the screen

to shift the display.

Centering Own Position

1. Press the [MENU] key.

2. Select “SHIP TO CENTER?”.

3. Press the [ENT] key.

Entering MOB Mark

1. Press the [MARK/MOB] key.

2. Select “MOB?”.

3. Press the [ENT] key.

4. Press the [ENT] key again.

Ship's track and

data

3D view of ship's

track overlaid on

intended course

Graphic display

of steering data

Comprehensive

navigation data

display

Registering Waypoints

A waypoint can be entered four ways. Be-

low is the procedure for entry by the cursor.

1. Operate the Cursor Pad to place the cur-

sor on the location you want to make a

waypoint.

2. Press the [ENT] key.

ENTER A NEW WYPT NAME.

0 0 1 — — — ?

( 001: DEFAULT NAME )

Quit : [MENU]

CURSOR POS. →WYPT

3. Press the [ENT] key.

NAME: KOBE

34°44.000’N MARK

135°21.000’E x

12—DEC—97 11:25

Exit?

4. Place the cursor under “MARK”.

5. Press the [ENT] key.

6. Press ▲ or ▼ to select the mark desired.

7. Press the [ENT] key.

8. Select “Exit?” and then press the [ENT]

key.

Registering Routes

1. Press the [MENU] key twice.

2. Select “ROUTES”.

3. Press the [ENT] key.

4. Press the [ENT] key.

5. Press the [ENT] key, select route

waypoint and press the [ENT] key.

6. Repeat steps 5 to enter other waypoints

on the route.

7. Select “Exit?”.

8. Press the [ENT] key to register.

Setting, Cancelling Destination

Destination can be set three ways. Below is

the method for setting destination by the

cursor.

To set destination;

1. Press the [GOTO] key.

2. Select “CURSOR?”.

3. Press the [ENT] key.

4. Place the cursor on position to set as des-

tination.

5. Press the [ENT] key.

To cancel destination;

1. Press the [GOTO] key.

2. Select “OFF?”.

3. Press the [ENT] key.

Setting the Arrival Alarm

1. Press the [MENU] key twice.

2. Select “ALARMS”.

3. Press the [ENT] key.

4. Press the [ENT] key.

5. Select “ARV”.

6. Press the [ENT] key.

7. Press the [ENT] key and enter arrival

alarm range.

8. Press the [ENT] key.

9. Press the [MENU] key.

PUB.NO.OSE-43840-D

(9801,DAMI) GP-30/35

Autres manuels pour GP-30 Operators

Ce manuel convient aux modèles suivants

Autres manuels Furuno GPS

Furuno

Furuno GP-7000F Manuel utilisateur

Furuno

Furuno GPS Navigator GP-50 MARK-2 Manuel utilisateur

Furuno

Furuno GP-150 Manuel utilisateur

Furuno

Furuno GP-1610C Manuel utilisateur

Furuno

Furuno GP-500 Manuel utilisateur

Furuno

Furuno GP-3500 Manuel utilisateur

Furuno

Furuno LC-90 Mark-II Manuel utilisateur

Furuno

Furuno LC-90MK2 Manuel utilisateur

Furuno

Furuno GP-320B Manuel utilisateur

Furuno

Furuno GP-39 Manuel utilisateur

Furuno

Furuno GP-80 Manuel utilisateur

Furuno

Furuno GP170D Manuel utilisateur

Furuno

Furuno GP-170 Manuel utilisateur

Furuno

Furuno GP-39 Manuel

Furuno

Furuno GP-30 Operators Manuel utilisateur

Furuno

Furuno GP-31 Manuel utilisateur

Furuno

Furuno GP-310B Manuel utilisateur

Furuno

Furuno GP-3700F Manuel utilisateur

Furuno

Furuno GP-320B Manuel utilisateur

Furuno

Furuno GP-39 Manuel utilisateur

Furuno

Furuno GPS Plotter GP1600 Manuel

Furuno

Furuno NAVNET 3D MFD8/12/BB Manuel utilisateur

Furuno

Furuno GR-80 Manuel utilisateur

Furuno

Furuno GP-170 Manuel utilisateur

Manuels GPS populaires d'autres marques

Raven

Raven Cruizer II Manuel

Hama

Hama 53118 Manuel utilisateur

Garmin

Garmin SOUNDER 125 Manuel utilisateur

Garmin

Garmin DEZL 580 Manuel utilisateur

Jigabot

Jigabot EX Manuel utilisateur

Pointer

Pointer Cellocator CelloTrack XT LTE Guide d'installation

Queclink

Queclink GV55LITE Manuel utilisateur

Voxson

Voxson Voxtrack GPS500 Manuel d'instructions

Garmin

Garmin ECHOMAP PLUS Manuel utilisateur

Starcom Systems

Starcom Systems Kylos Compact Manuel utilisateur

Garmin

Garmin 15 H Series Manuel utilisateur

Cobra

Cobra Marine MC 600Ci Manuel utilisateur

Cellocator

Cellocator CelloTrack T Manuel utilisateur

Enfora

Enfora Mini-MT GSM2228UG001 Manuel utilisateur

Magellan

Magellan eXplorist 100 Manuel utilisateur

LTE

LTE G50B Manuel utilisateur

Garmin

Garmin DEZL OTR500 Manuel utilisateur

SkyGolf

SkyGolf SkyCaddie SG1 Manuel utilisateur