Funkwerk TRT800RT Mode d’emploi

Operation and Installation

(Document-No.

03.202.010.71e)

P/N 800ATC-H-

(

Rxx

)

(

Rxx

)

TRT800RT - OLED

Remote Control Unit

TRT800RT / P/N 800ATC-H-(Rxx)-(Rxx)

Operation and Installation

2Document-No: 03.202.010.71e / Revision: 1.00

Change History

Revision Date Description of Change

1.00 22.10.2012 First Release

List of Service-Bulletins (SB)

Service Bulletins have to be inserted into this manual and to be enlisted

in the following table.

SB No

Rev.

No. Issue Date

Insertion

Date Name

Survey of Variants

Part Number Description

P/N 800ATC-H-(R00)–(R00)

First version with OLED-Display

TRT800RT / P/N 800ATC-H-(Rxx)-(Rxx)

Operation and Installation

3 Document-No: 03.202.010.71e / Revision: 1.00

Table of Contents

1GENERAL................................................................................................... 4

1.1 Symbols ........................................................................................... 4

1.2 Abbreviations ................................................................................... 5

1.3 Customer Support ............................................................................ 6

1.4 Features ........................................................................................... 6

2OPERATION............................................................................................... 7

2.1 Controls............................................................................................ 7

2.2 Switch ON/OFF ................................................................................ 9

2.3 Display - Indications ....................................................................... 10

2.4 Display-Brightness ......................................................................... 11

2.5 Flight-ID (FID) ................................................................................ 11

2.5.1 Display Flight-ID ................................................................. 12

2.5.2 Configure Flight-ID ............................................................. 12

2.6 Transponder Mode selection.......................................................... 13

2.7 Squawk-Setting .............................................................................. 13

2.8 VFR – Squawk ............................................................................... 14

2.9 ID – Special Position Identification (SPI): “Squawk Ident” ............. 14

3INSTALLATION ........................................................................................ 15

3.1 Notes.............................................................................................. 15

3.2 Scope of Delivery ........................................................................... 15

3.3 Unpacking and Inspecting of the Equipment ................................. 15

3.4 Mounting ........................................................................................ 16

3.5 Equipment Connections ................................................................. 17

3.5.1 Electrical Connections ........................................................ 17

3.6 Wiring ............................................................................................. 17

3.6.1 Conductor Cross Section.................................................... 17

3.6.2 Pin Assignment................................................................... 17

3.7 Post-Installation Check .................................................................. 18

3.8 Drawings ........................................................................................ 19

3.8.1 Dimensions......................................................................... 19

3.8.2 Mounting Advices ............................................................... 19

4APPENDIX................................................................................................ 20

4.1 Technical Data ............................................................................... 20

4.2 Environmental Conditions .............................................................. 21

TRT800RT / P/N 800ATC-H-(Rxx)-(Rxx)

Operation and Installation

4Document-No: 03.202.010.71e / Revision: 1.00

1 GENERAL

This manual contains information about the physical, mechanical and

electrical characteristics and about installation and operation of the

transponder remote control TRT800RT.

1.1 Symbols

Advices whose non-observance can cause radiation

damage to the human body or ignition of combustible

materials

Advices whose non-observance can cause damage to the

device or other parts of the equipment.

Supplementary information

TRT800RT / P/N 800ATC-H-(Rxx)-(Rxx)

Operation and Installation

5 Document-No: 03.202.010.71e / Revision: 1.00

1.2 Abbreviations

Abb. Meaning Explanation

FID Flight ID Flight plan number or if not assigned

registration number of aircraft

SPI Special Position

Identification

Activation on request by controllers

„Squawk Ident“, transmits SPI Pulse

for 18 seconds, which highlights the

respective traffic item on the

controllers radar screen

TRT800RT / P/N 800ATC-H-(Rxx)-(Rxx)

Operation and Installation

6Document-No: 03.202.010.71e / Revision: 1.00

1.3 Customer Support

In order to facilitate a rapid handling of return shipments, please follow

the instructions of the input guide „Reshipment RMA“ provided at the

Service-Area within the Funkwerk Avionics web portal www.funkwerk-

avionics.com.

Any suggestions for improvement of our manuals are

welcome. Contact: [email protected].

Informations on software updates are available at Funkwerk

Avionics

1.4 Features

Remote control and indication of all transponder settings/data during

standard operation (e.g. squawk code, operation mode, altitude etc).

Ideal for tandem seated aircraft:

Use of transponder still possible without activation of remote control

Automatic deactivation of remote control on deactivation of

transponder

TRT800RT / P/N 800ATC-H-(Rxx)-(Rxx)

Operation and Installation

7 Document-No: 03.202.010.71e / Revision: 1.00

2 OPERATION

2.1 Controls

If remote unit settings are inconsistent with transponder

settings as a result of short time transmission problem

(e.g. simultaneous user inputs) remote unit settings will be

reverted to current transponder setting.

ON / OFF „Squawk Ident“

Activate/

deactivate VFR

Change

Active ÙStandby

uawk

Select Operation

Mode

Cursor

adjustment

Rotary Knob

for adjusting values

at the cursor

position

active

Operation

Mode

standby Standby

uawk

Active

uawk

TRT800RT / P/N 800ATC-H-(Rxx)-(Rxx)

Operation and Installation

8Document-No: 03.202.010.71e / Revision: 1.00

I/O ON/OFF

►

Switch ON press button for approx. 0,5 s

Switch OFF press button for approx. 3 s

VFR VFR

►

activate/deactivate VFR Squawk

(press shortly)

store active Squawk as VFR/VFRW-Squawk

(press button 3 s, →2.8)

▲▼ CHANGE

►

change between active and standby-Squawk

works as cursor back button (opposite function

of the cursor button) during entering values and

also for navigating backwards through the

configuration menu (→Fehler! Verweisquelle

konnte nicht gefunden werden.)

ID IDENT

►

„Squawk Ident“, sends Ident marking (SPI) for

18 s (→2.9)

Enter Flight-ID (FID) setup (in standby mode,

press button for approx. 5s)

MODE MODE

►Select transponder operational mode (→2.6)

►CURSOR

►Set position of Cursor

Rotary

Knob

►Adjust/Enter values at current cursor position,

select options; set standby Squawk (→2.7)

TRT800RT / P/N 800ATC-H-(Rxx)-(Rxx)

Operation and Installation

9 Document-No: 03.202.010.71e / Revision: 1.00

2.2 Switch ON/OFF

Switch ON: press I/O for 0.5 s

Switch OFF: press I/O for 3 s

2.2.1 Display information after power up

After turning-on the display appears as follows (example):

TRT800RT.

V1.1

Device Name

Software Version

Connection to transponder

is successfully established

Transponder is not found /

data transmission failed

2000

FL 030

TBY 7

000

Transponder

not

detected

Table des matières

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur