FunkTronic Major 4a Manuel utilisateur
Major 4a
Major 5a
Software Option
Kenwood NEXEDGE
Software Option
Kenwood NEXEDGE
m4a_5a_kenwood_nexedge_eng (09.10.2014)
- 2 -
Kompetent für Elektroniksysteme
m4a_5a_kenwood_nexedge_eng (09.10.2014) - 3 -
Kompetent für Elektroniksysteme
Contents
Order Information 2
General Information 3
Control Elements Major 4a 4
Control Elements Major 5a 4
Display Elements Major 4a / 5a 5
Sockets Pinout Major 4a/5a 6
Rearview Major 4a/5a 6
RS232 Interface 7
RS232 Cable for Flashing/Printing/Monitoring 7
Configuration of the RS232 Interface 7
Example Configurations 8
Standard Keypad Assignment Major 4a 9
Standard Keypad Assignment Major 5a 9
Keypad Assignment Major 4a in Programming Mode 10
Keypad Assignment Major 5a in Programming Mode 10
Differences Major 4a - Major 5a 10
Menu Structure 11
Configuration of the Software 14
Programming Short Call 14
Changing the Assignment of Button Functions 15
Customizing the Call Input 16
Reset to Factory Defaults 16
Transmit/Receive SDS 17
Analog Channels 17
ACK Request 17
Default Group Call (since V3.06) 17
Table of Registers Major 4a/5a 18
Programmable Functions 21
Technical Data 23
Tontabelle 23
Important Settings at the Kenwood Radio 24
General Safety Information 26
Returning of Old Equipment 26
Release Notes 27
Page
Order Information
Order No. Description
681000.NX Major 4a incl. Option Kenwood NEXEDGE
714000.NX Major 5a incl. Option Kenwood NEXEDGE
903050 Distribution Frame (Überleitverteiler) DMR, 2-fold
903051 Distribution Frame (Überleitverteiler) DMR, 3-fold
Distribution Frame (Überleitverteiler) DMR, available on demand up to 9-fold
Attention: If needed, a power supply unit is available separately:
900012 Power Supply Unit 230V/12V for Major 4a + Major 5a
m4a_5a_kenwood_nexedge_eng (09.10.2014)
- 2 -
Kompetent für Elektroniksysteme
m4a_5a_kenwood_nexedge_eng (09.10.2014) - 3 -
Kompetent für Elektroniksysteme
In order to allow direct connection to a digital radio of the Kenwood NEXEDGE series, Major 4a and
Major 5a can be equipped with the software option Kenwood NEXEDGE.
General Features :
General Information
- alphanumeric LC display with background lighting
- gooseneck microphone with high dynamic range
- plaintext menu structure for simple programming via the keypad
- all buttons are freely programmable
- two functions can be assigned to each button
- A Kenwood NEXEDGE radio can be directly connected
- A Kenwood NEXEDGE radio can be remotely connected (Audio-USB Interface-Box)
- Two sockets for control via headset, one of those for connection of a PTT foot switch
- 7 digital In/Outs for channel switching or other purposes
- operates via an external 12V-DC power supply
m4a_5a_kenwood_nexedge_eng (09.10.2014)
- 4 -
Kompetent für Elektroniksysteme
m4a_5a_kenwood_nexedge_eng (09.10.2014) - 5 -
Kompetent für Elektroniksysteme
Control Elements Major 4a
handpiece with
PTT button
gooseneck microphone
loudspeaker (LS)
button
call button
short call button PTT button
LC display
function buttons
special buttons
status LEDs
Control Elements Major 5a
loudspeaker
gooseneck microphone
loudspeaker button
call button
short call button
PTT button
LC display
status LEDs
volume button
m4a_5a_kenwood_nexedge_eng (09.10.2014)
- 4 -
Kompetent für Elektroniksysteme
m4a_5a_kenwood_nexedge_eng (09.10.2014) - 5 -
Kompetent für Elektroniksysteme
Display Elements Major 4a / 5a
LC Display
All alphanumeric readouts are presented by a LC display with background lighting.
Status LEDs
Carrier Display (Squelch)
The carrier display LED can be controlled by voice (2-wire connection) or via squelch input
(using the radio set). If the light is on, the radio circuit is occupied, that is, a carrier signal
(carrier is keyed) is present.
PTT Display (Push-to-Talk)
The PTT display LED is on, if the transmitter is keyed. Keying of the transmitter is achieved
by pressing the PTT button during telephony or by sending a call.
Loudspeaker Display (Incoming Call)
The loudspeaker display LED is on, if the loudspeaker or the earphone capsule in the
handpiece are switched on.
m4a_5a_kenwood_nexedge_eng (09.10.2014)
- 6 -
Kompetent für Elektroniksysteme
m4a_5a_kenwood_nexedge_eng (09.10.2014) - 7 -
Kompetent für Elektroniksysteme
PWR operating voltage 12V, max. 1,5 A
inside: positive terminal, outside: GND
Rearview Major 4a/5a
Pinout I/O
Digital In/Outputs (ST3)
IN/OUT 0 1
IN/OUT 1 2
IN/OUT 2 3
IN/OUT 3 4
IN/OUT 4 5
IN/OUT 5 6
IN/OUT 6 7
GND 8
Pinout RS232
(ST4)
NC 1
NC 2
TxD 3
RxD 4
GND 5
NC 6
Pinout S/E
Radio Circuit (ST1)
AF input B 1
AF input A 2
Squelch input 3
GND 4
output +12 V, max. 200 mA 5
PTT active, low 6
AF output A 7
AF output B 8
Pinout PTT
Headset (ST2)
GND 1
GND AF input (mic. -) 2
NF earphone 3
GND earphone 4
AF input (mic. +) 5
PTT, active GND 6
Sockets Pinout Major 4a/5a
All AF in/outputs are equipped with transformers
and, hence, potential-free. PIN 5 is for supply
(+12V) of external devices (LIM-AC, FT634C).
Attention: Do not use PIN 5 to supply a radio
set. 200 mA output current is not sufficient.
There are two sockets for connecting a headset.
One is for connecting the headset, the other
for the use of an external PTT button (e.g. foot
switch)
The digital connections can be configured as
inputs or outputs, respectively. Usually, these are
used as outputs for remote channel select.
All of the schemes show the sockets as viewed from the rear of the Major.
ST1
ST2AST4 ST2ST3PWR
Pinout HS
Headset (ST2A)
GND 1
AF input (mic. +) 2
AF earphone 3
GND earphone 4
GND AF input (mic. -) 5
PTT, active GND 6
m4a_5a_kenwood_nexedge_eng (09.10.2014)
- 6 -
Kompetent für Elektroniksysteme
m4a_5a_kenwood_nexedge_eng (09.10.2014) - 7 -
Kompetent für Elektroniksysteme
5 GND
ST4 RS232 Interface
RS232 Interface
Pinout
RS232 ST4
1
2
3
4
5
6
RS232 Cable for Flashing/Printing/Monitoring
7 GND
2 TxD RS232
3 RxD RS232
RS232 25pin connector on computer RS232 socket on Major
TxD
RxD
GND
Pinout
RS232 ST4
1
2
3
4
5
6
TxD
RxD
GND
3 TxD RS232
2 RxD RS232
RS232 9pin connector on computer RS232 socket on Major
Configuration of the RS232 Interface
9600 Baud, 8 data bits, no parity, 1 stop bit, no protocol
m4a_5a_kenwood_nexedge_eng (09.10.2014)
- 8 -
Kompetent für Elektroniksysteme
m4a_5a_kenwood_nexedge_eng (09.10.2014) - 9 -
Kompetent für Elektroniksysteme
RS232
Audio, UBAudio, RS485
3
/
/
6
Remote Control of the Radio
Several Control Panels, remotely Connected to the Radio
8
/
RS232
3
/
/
6
Major 4a
Audio, UB
Direct Connection to the Radio
Major 4a
RS232
Audio, UB
3
/
/
6
Audio, RS485
Audio, RS485
RS232
Audio, UB
3
/
/
6
RS232
Audio, UB
3
/
/
6
8
/
USB
Audio, UB
4
/
/
6
\ 8
Major 4a
Major 4a
Distribution Frame DMR
Example Configurations
m4a_5a_kenwood_nexedge_eng (09.10.2014)
- 8 -
Kompetent für Elektroniksysteme
m4a_5a_kenwood_nexedge_eng (09.10.2014) - 9 -
Kompetent für Elektroniksysteme
0 ... 9 : number input (call, channel, status...)
* short : delete last number
* long : delete whole call input
# short : scroll through ID-code memory
# long : delete ID-code from memory
: channel input
: PTT gooseneck mic / status
: toggle selective call / group call
Z : switch to status input (if a complete call
is entered in the display)
: volume control
¡13
5
4
8
2
0
9
*
7
6
#
A
EF
+
-
S1
¡
B
S2
¡
C
S3
¡
D
S4
Standard Keypad Assignment Major 4a
1 3
54
8
2
0
9
*
7
6
#
A B C
D E F
Standard Keypad Assignment Major 5a
Comparable to Major 4a, but without the additional buttons
S1...S4 and F1...F4.
+
-
m4a_5a_kenwood_nexedge_eng (09.10.2014)
- 10 -
Kompetent für Elektroniksysteme
m4a_5a_kenwood_nexedge_eng (09.10.2014) - 11 -
Kompetent für Elektroniksysteme
Keypad Assignment Major 4a in Programming Mode
Button reduces by 1, button increases by 1.
The values A - F are assigned to the buttons
S1...S4, * and #.
¡13
5
4
8
2
0
9
*
7
6
#
A
EF
+
-
S1
¡
B
S2
¡
C
S3
¡
D
S4
1 3
54
8
2
0
9
*
7
6
#
A B C
D E F
Keypad Assignment Major 5a in Programming Mode
Long pressing of buttons 1 to 6 results in the
additional values A-F..
The call button reduces by 1, and the red PTT
button increases by 1.
+
-
The Major 4a is different from the Major 5a in the following points:
1. different keypads
2. Major 4a has a handset, Major 5a has none
3. differences in the software, mainly resulting from point 1+2
Differences Major 4a - Major 5a
Autres manuels pour Major 4a
4
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels FunkTronic Système de microphone
Manuels Système de microphone populaires d'autres marques
Sennheiser
Sennheiser Evolution Wireless Digital EW-DX EM 2 Manuel utilisateur
Alpha Technologies
Alpha Technologies RBMS Manuel utilisateur
SWIT Electronics Co.,LTD.
SWIT Electronics Co.,LTD. CW-S150 Manuel utilisateur
Shure
Shure UA844 Manuel utilisateur
Panasonic
Panasonic SHFX70 - DVD HOME THEATER WIRELESS SYSTEM Manuel utilisateur
Pyle
Pyle PDWM5000 Manuel utilisateur